How to maintain gap between table and graph in a report

HI,
I have a report in which a graph is placed below a table and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added but then i want maintain same gap between the table and graph???

>Right click on chart.
>Open the property and go to the relative position.
>Select the distance of the upper left point of the chart in relation to another report element by entering - the number of pixels; the part of the tavfrom which youble want to measure the pixels (in the first drop-down list); the report element from which you want to measure the pixels (in the second drop-down list).
>Repeat this for the distance of the lower left point of the chart.
Hope this will help you out.

Similar Messages

How to maintain space between table and header in ssrs

Hi Everyone,
I have created a report. In page header of this report, On First Page space between header and
body is good , but from next page, space is not maintain.
Please suggest me how to maintain space at every page of report.
Thanks.

Can you post a screenshot?
This can be achieved if you are repeating column headers on each page. Just change row height of header and align text to bottom, and make sure there is no space between Page Header and Tablix.
- Vishal
SqlAndMe.com

How to maintain space between value and base unit of measure in sapscript

Hi Guys,
I am working on an upgradtion project, i have problem like while upgrading from 4.6b to 5.0. i need to main a space between value and base unit of measure. can anyone letme know how to maintain in the form. I mean in sapscript.
Thanks,
Yogesh

There are a couple of ways to handle this, if you need a bigger space between, you can use tabs in the paragraph format. Or you can just write the space in between the fields like so.
ZA &MSEG-MENGE& &MSEG-MEINS&
Regards,
RIch Heilman

How do I remove a gap between table rows in InDesign?

I need help in figuring out how to remove gaps between table rows. I have tried Table Spacing under Table Set-up, but it doesn't work.
Here's what I'm working on:
As you can see there are gaps above the first row and below last row under the header Business Management Technology. I cannot select that gap. How do I remove it, so that the first class, 31058, is flush with the black header? (and the last class, 32675, is flush with the Chemistry header?)
Any advice would be greatly appreciated.
Thanks,
Sarah

SRiegel wrote:
...it may be that the black bar is created with a paragraph rule instead of cell color.
I hadn't considered that, and your example is proof-of-concept. However, now that you made me look closer, I still don't think that's the OP's case, seeing as the text in the OP's header rows appears to span more than one column, belying what I suppose must be merged cells.* The column strokes in the "gap" appear to disqualify it (the gap) as part of a row with merged cells.
*There is still another possibility that someone "made pictures" of tables with merged cells by overlaying text frames to make the header rows. I've run across all kinds of such "carpentry;" especially when the file may have originated at the desk of someone who avoids or resists use of tables. They find ways to fake them and/or their features.
[still looking]

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

How to group Table and Graph in the same section in OBIEE 11g

Hi,
I have a requirement of showing the table and graphs together for various products in different section. For example, for Product A, the table and graph would be displayed together and after product A, the table and graph for product B should be displayed.
I have tried using section but it creates the seperate section for tables and Graphs. Is there a way that we can put the section on table and graph together.
Thanks.

By any chance are you using a pivot table? If so, you can "Graph Pivoted Results". (When you're editing the pivot table, it's the last button at the top/middle of the page.) Then you can use the products column to break the pivot into sections and you'll have a pivot table and graph per section.
JB

The Relation between tables and views in oracle financial

Dears
I am work in oracle e business r12
and i need to build report as xml
when run my select its need big time to view data i have a huge of data so i need to clear the relation of this tables if there is miss and if there another technique in select statement
this is my select statement
select
j_hdr.je_header_id je_header_id,
hdr.VENDOR_NAME supplier,
SEGMENT1||'-'||SEGMENT2||'-'||SEGMENT3||'-'||SEGMENT4||'-'||SEGMENT5||'-'||SEGMENT6||'-'||SEGMENT7||'-'||SEGMENT8||'-'||SEGMENT9 Account_number,
hdr.gl_date gl_date,
j_hdr.CURRENCY_CODE CURRENCY_CODE,
inv_lin.DESCRIPTION DESCRIPTION,
j_lin.ENTERED_DR ENTERED_DR,
j_lin.ENTERED_CR ENTERED_CR,
j_lin.ACCOUNTED_DR ACCOUNTED_DR,
j_lin.ACCOUNTED_CR ACCOUNTED_CR,
j_hdr.JE_SOURCE JE_SOURCE,
j_hdr.DEFAULT_EFFECTIVE_DATE Transaction_DATE,
hdr.INVOICE_NUM INVOICE_NUM,
QUICK_PO_NUMBER PO_NUMBER,
null ASSET_CATEGORY_ID,
hdr.VENDOR_ID VENDOR_ID
from gl_je_headers j_hdr,gl_je_lines_v j_lin,ap_invoice_distributions dist,ap_invoices_v hdr,ap_invoice_lines_v inv_lin
where code_combination_id = DIST_CODE_COMBINATION_ID
and hdr.invoice_id = inv_lin.INVOICE_ID
and dist.invoice_id = inv_lin.INVOICE_ID
and j_hdr.JE_HEADER_ID = j_lin.JE_HEADER_ID
and j_hdr.status = 'P'
and nvl(:P_SOURCE,'Payables') = 'Payables'
and je_source = 'Payables'
and j_lin.CODE_COMBINATION_ID between ( select CODE_COMBINATION_ID
from gl_code_combinations_kfv
where CONCATENATED_SEGMENTS = :P_FROM_COMBINATION_CODE)
and ( select CODE_COMBINATION_ID
from gl_code_combinations_kfv
where CONCATENATED_SEGMENTS = :P_TO_COMBINATION_CODE)
AND TRUNC(dEFAULT_EFFECTIVE_DATE) BETWEEN NVL(:P_FROM_DATE, DEFAULT_EFFECTIVE_DATE) AND NVL(:P_to_DATE, DEFAULT_EFFECTIVE_DATE)
Thanks in advance

Welcome to the world of complicated Oracle Application queries. Didn't fully understand your question, so a few guesses -
I think that you are asking how to make your query faster? I would reference the FAQ section on how to post a question regarding performance.
Your title indicates you want to understand the relationship between tables and views. In general, Oracle Applications uses views for 2 reasons - to join data from multiple tables for display, and to differentiate data from different organizations. (I am still on 11i and have heard organizations are handled differently in 12 so I can't speak to that for sure).
To understand the relationship between tables in a view, you can access the view's source code, either through a development tool such as PL/SQL Developer or TOAD (I'm guessing Oracle's tool does this also, but have never used it), or by querying the source from the dba_source table.
select * from dba_source where name = (name of view) and type = 'VIEW' order by line;without the ( ) just the view name, in all capital letters i.e. , 'GL_JE_LINES_V'
Good luck!

Am unable to insert table and graphs into word document in labwindow/CVI? can any one help me ?

Am unable to insert table and graphs into word document in labwindow/CVI? can any one help me ?

Are you using the Word Report Generation instrument? You can find it in toolslib\activex\word\wordreport.fp under the CVI directory.
The instrument comes with a sample project that shows how to include table and graphs in a Word document: see samples\activex\word\wordrpt.cws in the samples foder of your CVI installation.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Difference between Table and Container

Hi,
Whats the difference between table and container.
How to create container in smartform.
Cheers
Senthil

Hi,
I have a requirement to remove a column from an existing container. I removed a column, but still the column showing up.. so I decided to recreate the container again. But I can create only table. How to make this as container.
Cheers
Senthil

Diff. between table and template in smartforms

hi there,
please tell me what the diff. between table and template options available in smartforms

HI
GOOD
TABLES=>
In forms of business procedures you usually want to list details such as open items of an invoice. You can use a Smart Form to display this data in a table. You can design the layout of the table independent of the number of lines it will contain. The size of the table depends on how much data the application program passes to the form at runtime (unlike with templates, where you specify the number of columns and lines explicitly). The table can cover one or more pages, depending on the number of lines. This is why you display tables in the main window.
TEMPLATES=>
Use node type Template to display a table whose layout and size (number of lines and columns) is determined before the runtime of the application program. For this reason, a template is also called a static table.
To create a template, define a table layout to determine the cell structure for each line. The cells are used to display the contents of the inferior nodes of the template node. This allows you to position text and a graphic side by side (see Displaying Graphics in Templates).
The template node is also suited for label printing.
GO THROUGH THIS LINK
http://help.sap.com/saphelp_nw04/helpdata/en/4b/83fb4edf8f11d3969700a0c930660b/content.htm
THANKS
MRUTYUN

Gap between Trim and Textframe

Hi,
Any one can help me how to check space between trim and textframe. touch with me
regards
balaji

@balaji –
Sort of a "geometric solution", especially if your text frame is rotated and/or skewed:
use a helper rectangle the size and position of your desired trim box, combine the text frame with the helper rectangle to a group and check if the geometric bounds of the group are different to the helper rectangle.
WARNING:
I have to point out that this solution is pure theory, because you cannot be sure that part of single characters or applied effects to the text frame like drop shadows will not exceed the helper rectangle. Or imagine the case where a table sticks out of the geometric bounds of the text frame and violates the trim box.
For that advanced cases you need a rendered pixel representation (e.g. of an exported pdf) and you have to do cross-scripting InDesign to PhotoShop with bridgeTalk to check if there are any pixels violating the bounds of your trim box. Not an easy task.
Uwe

Please: How to sinchronize "contacts" between pc and ipad in windows 8?

Please: How to sinchronize "contacts" between pc and ipad in windows 8?
Thank you.
Ramón Mª

http://support.apple.com/kb/HT1296
Regards.

How to maintain Space between text in Smart form

Hi Experts,
How to maintain space between text in smat form.
For example
I need to maintain like this
Prepared By:                       Passed By:                  Approved By:
    but after save it come like this
Prepared By:   Passed By: Approved By:
How to maintain spaces between texts?
Regards,
Sreedhar.

hi,
we can give space in the smartform in the same way as in the scripts with two commas one space can be given.
when u click on the text in the window ,
there in the general attributes at the left hand side u can find a small icon for editor in that u can define the spaces with the variable to be printed in &var&.

How to count records from 2 tables and show in RDLC Report

hi all,
its being a one day searching for the solution but No Luck.
I have two SQL tables tblstudetail and tblfeereceiptdetail.
i just want to count records from both tables and show in RDLC report.
I tried SQl Query Like This:
select a.session, a.course,
Count(CASE a.ADstatus WHEN 'OK' THEN 1 ELSE 0 END ) AS Admission,
Count(CASE s .I_receiptstatus WHEN 'OK' THEN 1 ELSE 0 END) AS Feeprint
from
tblstudetail a
FULL join
tblfeereceiptdetail s on s.studentID = a.studentID
where a.session = '2015' AND s.Fsession = '2015' AND a.adcat = 'Regular'
GROUP BY a.session,a.course
ORDER by a.course
The result Show the Same Value in Both columns
Session    Course      Admission       FeeDetail
2015          B.A. I               275              275
2015          B.A. II              307             307
2015         B.A. III             255            255
2015          B.Sc. I             110             110
2015   B.Sc. II           105            105
2015          B.Sc. III            64               64
Actully I want to Count How many ADMISSION have been Taken(FROM tblstudetail) and How many FEE RECEIPT have been Print (From tblfeereceiptdetail).
please guide me for this as soon as possible.
thanks in advance...

I am counting 'OK' in both the table columns I.e 'ADstatus' in tblstudetail and 'feereceiptstatus' in tblfeereceiptdetail
please suggest me

How to transfer books between ipad and pc

How to transfer books between ipad and the windows pc using iBooks.
REGARDS
Nadunbat.

make sure the pc has the most current version of i tunes for windows, then simply sync your pad. If it asks, upload purchases. They will be there when you need them.

How to maintain gap between table and graph in a report

Similar Messages

Maybe you are looking for