How to maintain Import Processing: Control Code for the country India

Hi Gurus,
I need to maintain the Control Processing: Control Code for the country India in SPRO configuration.
Please tell me the path to maintain it.
Thanks,
Thiyagu

spro@Logistics - General@Material Master@Material IDs@Maintain PKWiUs
Regards,
Indranil

Similar Messages

What is STB Remote Control code for the Magnavox 15MF400T/37 set?

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair.

How to Find unused programs / T-codes for the past three months

How to find the unused programs / transaction codes for the past three months,
I tried with the ST03 Transaction but it gives only the Tcodes, program used in last one monthu2026
Regards,
Purshoth

This depends on the data retention time (in days) maintained in your system. In ST03, on the right hand side, check "Collector" tab, under that "Performance Database" and then "Reorganization" which will give you the details retention times (in days).
Also please check the link http://inet.tamko.com:8081/saphelp/helpdata/EN/c4/3a68d5505211d189550000e829fbbd/frameset.htm for more details.
Thank You.

How do I set my Region Code for the DVD player?

When I insert a DVD, it is not prompting me to set the region code and I cannot figure out how to set it manually. When I insert a DVD, I get an error message that says "supported disk not availabe". I have already run the Repair Disk Permissions from disk utility and that didn't work so I thought maybe the problem is with the region coding. Your help is appreciated!! Thanks.

http://support.apple.com/kb/ht2397

How to: accept then process all mail for the MTA.

using messaging server 5.1 what channel definations are required to tell the MTA to accept all incomming mail and then process it. Instead of dropping it at the door, meaning that it just rejects the message if the user is not housed on the system.

Chris,
Give me details on just what it is you are trying to accomplish. There are many ways to do things in iMS and if I can better understand what it is you are trying to do, the big picture, then I can comment further.

How to map import process for items

Dear All,
can anyone guide me how to map import process for items for our customer
what i understand is this process in B one
Raise PO
GRPO
Landed Cost
AP Invoice
I want to know whether this is correct. Also in this process their are clearing agents who perform the formalities at customs office and then raise bill to client for the same

Hi,
The process looks correct. For cost related to clearing agents who perform the formalities at customs office, use landed cost.
Thanks,
Gordon

How to write processing code for the Inbound IDOC to the R/3 ??

i m having a file -> XI-->R/3 scenario,
IDOC is being sent from XI to R/3,
can u guide to me to write a processing code for the Inbound IDOC to the R/3,
since i m new to ABAP and ALE technology, can we provide me any blog for doing that.......or guide me....

Hi Sudeep
Simple File to Idoc scenarion blog
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
Also see the blog
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> by Ravikumar.
Configuration of IDOC adapter
http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/frameset.htm
Regards
Santhosh
*Reward points if useful*

Process Controlled WF for Shopping Cart

Hi,
We have implemented process controlled workflow for shopping cart approval.
1. Created a bespoke schema for the approval process
2. Defined 5 process levels in the schema
3. changed the BRF event at the schema evaluation level. It now
contains a constant with the name of new schema create in step 1.
4. Decision set used is item based approval for partial documents (Type 4)
4. The first process level is get the technical approval from bespoke
table based on material group. For that we have first created a
Responsibility Resolver Name - ZTECHNICAL_APPROVER.
We have implemented the BADI - /SAPSRM/BD_WF_RESP_RESOLVER. Assigned
the filter as BUS2121 and ZTECHNICAL_APPROVER.
5. Now we have placed the external debugger in BADi. when we create
the shopping cart the flow doesn't stop at the break point. The item
reaches to the last step of Automatic approval (Rejected).
6. We think that schema is getting evaluated, however the process
level is not getting called.
7. Before we created schema, all the carts wer getting "Approved" by
automatic step. In our schema the automatic step is "Rejected", hence
the carts are getting rejected.
Could you please let me know what could be reason for BADI
implementation not being called or is there any config step which we
are missing?

Hi,
I think your process level evaluation id is not true, that is the reason system skips the process level.. Can you check your evaluation event-expression code. What do you see in SLG1? For testing purpose change the evaluation id to 0EV000 and check. Make Sure you debug through the user(requester) that you are creating the SC. Please test and let me know...
Saravanan

How do you import copyright controlled cds into Itunes?

Hi
how do you import copyright controlled cds into Itunes?
When i put the cd into my computer, Itunes does not read it like a regular cd. It does not show up in my source list.
I just want to put the songs on the cd onto my ipod.
The cd will play in windows media player and i was able to save the cd as wma files onto my computer, and then i tried to import those files, but Itunes says the file is copyright controlled, and the only way for itunes to import it is with the orignal cd? The original cd was in my D drive the whole time, but it still will not let me import.
I also tried physically looking into the CD for the music files, but those aren't there. The cd is like an enhanced cd where if you look into the drive for files there are no files except for 2 icons. The actual icon the open the player to play the cd and a uninstall icon.
does anyone know how to do this? PLEASE HELP!

I have downloaded the latest version of Itunes. I don't think that is the problem. Music companies have started issuing "copyright controlled" cds now especially on import versions of cds. I have the original cd, but Itunes cannot import it due to the copyright because it is protected. I read the "help" file on the cd, and what it does is you can play it as much as you like, you can make a copy of the cd only 3 times. The copy of the CD is also copyright protected. I have tried Itunes, WMA, Sonicstage, Sonic and etc programs, but nothing has worked.
Hopefully, someone from APPLE will now what I mean about the copyright controlled CDs. I only want to be able to listen to the music on my IPOD. Nothing has worked

Is there any differnce between the Numeric Limit Test source code from TestStand 3.0 to TestStand 3.1? How to get the source code for the Numric Limit Test for both the versions?

I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
Jeyan

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

IS-Retail:how to maintain different unit of measures for a article

hi experts,
                can anyone tell me how we maintain different unit of measures for sales and purchasing for a article.base unit of measure,order unit,var unit.Hope for a good answer.
Regards

Hi,
Go to MM42, select basic data view
In,Units of measure/ EANs /dimensions sub tab
there u can see four radio buttons
B.Un    Unit of measure is base unit (used internally only)
O.Un    Unit of measure is the order unit                             - Purchasing
D/L.Un Unit of measure is delivery unit/issue unit              - Logistics
S.Un    Unit of measure is the sales unit                             - Sales
for eg:
First line enter EA (each) or PC (piece) in Auom for a material and enter 1 in Number and select radio button for B.Un
Second line enter CT (carton) in Auom and enter 10 in Number and select radio button for O.UN (when you creating a PO it UOB automatically picks as CT)
Third line enter PALin Auom and enter 50 in Number and select radio button for D/l .UN (when u creating a delivery UOB picks as PAL ie pallets)
Fourth line enter EA or PC and enter 1 in Number and select radio button for S.UN (when u creating a Sales order UOB picks as EA or PC as u defined)
Mohan

How do I get a pass code, for my iPad mini

How do I get a pass code for my iPad mini.

What exactly do you meanby "Get a pass code"?
Do you want to set one?
do you need to enter one but don;t know it?
Please provide as much detail as possible about the issue.

I scratched the label off on a £25 gift card and it removed the code. How can I get the code for the card?

I scratched the label off on a £25 gift card and it removed the code. How can I get the code for the card?

Click here and request assistance. Gift cards are usually if not always final sale because it would be easy enough for someone dishonest to abuse returns or replacements of them.
(58640)

Process and Code for writing an RFC to retrieve data from IT0006 and IT0655

Hi,
Can some body tell me the process and code for creating an RFC to retrieve data from IT0006 and IT0655.
Its very urgent........
Waiting for an early reply.....
Many thanks

Hello Krishna,
      The process for creating an entry in infotype is as follows.
1.First you get the personal number lock for upating.You can use function
    module ' BAPI_EMPLOYEE_ENQUEUE ' or ENQUEUE_EMPREL.
2.Pass the records to function module ' HR_INFOTYPE_OPERATION' with
   OPERATION - 'INS'.
3.Unlock the Employee by using function moule 'BAPI_EMPLOYEET_DEQUEUE'.
Regards,
Manoj.

Process and Code for writing an RFC to retrieve data from IT

Hi,
Can some body tell me the process and code for creating an RFC to retrieve data from IT0006 and IT0655.
Its very urgent........
Waiting for an early reply.....
Many thanks

Inside your RFC you can directly use select on PA0006 & PA0655
or use FM: HR_READ_INFOTYPE
if you wan for multiple pernrs then cal the FM inside a loop or you can use the select query for multiple pernrs
reward points if helpful

How to maintain Import Processing: Control Code for the country India

Similar Messages

Maybe you are looking for