How to Maintain Reasons for the Opportunity Status in SPRO

Dear all,
I want to maintain reasons for the opportunity status. could any of you educate me about this. Your help will be highly rewarded.
thank you
Raghu ram

hi Raja ram,
u can maintain status reasons for Opportunity SPRO
CRM-TransactionsSettings for Opportunity--Maintain Status Reason and Status Profile for Opportunities
in this u need to select cataloge type (O1) in this u can maintain reasons for status
Regards
sreedhar

Similar Messages

How to add a document type for the residence status GB in infotype 48

Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chris

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

How to determine reason for socket write failure

Hi,
I'm new to socket programming in general, so please bear with me. I've looked around on the forums quite a bit, and haven't found an answer to this question.
I'm working with server code which creates TCP connections over an air interface with a mobile phone client. Since the air interface is inherently unstable, we rely on the TCP buffering/retry mechanism to store up to its capacity of messages if the client is temporarily non-responsive. Since we are sending small amounts of data, this will actually last for quite a while (several minutes or more depending on how much data we are needing to send). As part of an audit mechanism to detect lost clients, I do a write of a "heartbeat" to the socket and if the write fails, I can assume that either the buffer is full (meaning the mobile "went away" either due to loss of battery power, driving through a very long tunnel, etc.), or the mobile actively disconnected the socket.
However, I'd like to know if there is a way to determine the reason for the write failure? I catch the exception, but as far as I can tell they are all IOExceptions. Is there any way to further delineate the reason for a socket failure?
Any help would be greatly appreciated.
Thanks,
-Lisa

If you're in a hurry, I don't have an answer for you.
That said, it was an intriguing enough question that I did some poking around as well. There is a socket exception class, but generally speaking, the only methods that throw socket exceptions tend to deal with defining, creating and closing the socket.
Communicating through the socket is done through input and output streams, and like any other streams, those throw I/O exceptions. I suspect you're catching IOEs because you're using streams. Unfortunately, even Socket.sendUrgentData( int data ) also returns an IOException rather than an SException.
In the interests of covering all the bases, are the IOE messages unsufficient? That is, try...
   } catch ( IOException ioe ) {
      System.out.println( "IOException: " + ioe.getMessage() );
   }...might give you enough information to make a guess at whether the buffer is full or if the foreign host has closed the connection. I would suspect this feature is architecture dependent - UNIX systems might have more detail than Wintel systems.
As a last resort, you could extend the InputStream class and do the appropriate testing when writing/sending your packet. I would think that the only cases you can test for are whether the buffer is full (by maintaining a copy of the buffer and updating as appropriate), the mobile is currently sending data, or if the mobile is just not available.
Conventional Java isn't really the best for this because I'm not sure the JVM security model really wants to allow you to directly analyze TCP packets (otherwise you could just check for ACK statements). JME might have an easy solution that we didn't know about and you should ask on the appropriate forum. Alternatively, you might want to think about using C to write a library that handles connections this way, and externally call the library from the rest of your Java program.

Maintain Vendor for the excise invoice

Dear Guru's,
While creating goods receipt (In STO Process), I am facing the following error,
"Maintain Vendor for the excise invoice"
How to solve this one.
Regards,
CS

Hi CS,
Check whether you had maintained the vendor(supplying plant) in J1ID and also check whether excise indicator 1 is there.
And also check whether vendor (supplying plant ) is linked with customer in vendor master in Account control tab and also check whether vendor master (supplying plant) is linked to your customer master in control data ....
Hope this will serve you..
regards,
Patil

How to maintain EOIO for JMS to multiple webservices scenario

Hi,
I have a requirement that
how to maintain EOIO for JMS to multiple webservices scenario.
JMS queue has multiple messages, each message has to be sent to either of 2 receivers.
How to maintain EOIO in case, when there are 2 receivers.
Regards
Sekhar

Hi,
since messages are split between 2 webservices receivers, each would have its own SOAP adapter.
So if order of messages in the JMS queues is M1, M2, M3 and M4 . There is a field based on which split happens.
Say, if M1 and M3 have to go Webservice1 (will have its own mapping)
and M2 and M4 have to go Webservice2. (will have its own mapping)
we'll have two receivers in the receiver determination and hence two Interface determinations.
The result should be
M1 delivered to Webservice1
M2 delivered to Webservice2
M3 delivered to Webservice1
M4 delivered to Webservice2
How will we maintain EOIO in this case?
Regards,
Balaji.M

How to maintain cluisterview for new business roles in SAP CRM2007

How to maintain cluisterview for new business roles in SAP CRM2007.
Table - CRMV_UI_NB
Regards,
Biplab

I also look forward to a 'solved' answer to your question.
In the meantime, I'm curious to know if there are any organizations today running SAP B1 HANA for their production system. Would you know of any?

How to maintain info in the Toshiba ReelTime that I keep on toolbar?

I hope I'm in the right place :-)
I would like to understand, for once and for all, how to maintain info in the Toshiba ReelTime that I keep on my toolbar.
Whether pictures or documents on my dasktop: when I send them to documents they are lost from ReelTime and it says "the file for this shortcut no longer exists."
How can I avoid that because what is the point of ReelTime otherwise?
Thank you.

Hi
Toshiba Reeltime is a free app showing you a visual timeline of your recently accessed files using graphic thumbnails like movie frames, so you can get to your files faster.
The Reeltime makes easier to search for files up to 5000 recently used documents in a timeline. The presentation will be in reverse chronological order, so the most recently used files would appear firstly. Filters allow you to limit the search to photos, text documents or other types.
> Whether pictures or documents on my dasktop: when I send them to documents they are lost from ReelTime and it says "the file for this shortcut no longer exists."
This happens because the place of the files has changed

How to maintain WORK for General Cost activity

Hi,
can anybody show me how to maintain WORK for a General Cost activity. In the detail screen I cannot find field WORK, so I also don't know how to confirm for a General Cost activity
Thanks
Long

Hi,
It seems you have 2 different requirment:
1. Maintaining work: Use Internal activity
2. Confirm cost activity: Refer [Link|Actual cost in Cost Activity;
Regards

How to generate keys for the records

Hi Gurus,
can anybody explain me how to create keys for the recors while working with keymapping.
Regards
Ravikumar

Hi Yugandher,
Is your Question pertaining to Key generation in MDM or using the Remote key for importing and syndication in MDM?
Remote Keys are system specific uniques maintained in MDM while importing source records from different source system.You need to Enable key mapping in Console and then map the <Remote key> field to the unique key in Import manager and do similar mapping in syndicator as well.
You can view the key mapping for differnt records under the Edit key mapping (context menu) right clicking on any record.
To know more on this refer the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c (Key mapping)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30843106-5539-2b10-75a9-da483911b0d9 (Key mapping)
For Key generation in MDM you can use the Qualified range property of Remote system in Console for Key genearation.However these keys will be genearted only after syndication and are created and assigned within MDM and not maintained from any source remote system.
Hope It Helped
Thanks & Regards
Simona Pinto

Appraisals using MBO and To do List - how to maintain both in the system

Appraisals using MBO and To do List in T&E- how to maintain both in the system. If the switch HAP00 REPLA is on thn the to do list cant be maintained.
if the HAP00 REPLA is off thn the appraisal doc picks the user id directly and doesnt pick the employee name..
Could anyone give me some inputs on how to maintain the To do list for appraisals in T& E and at the same time use MBO in PD appraisals adn resolution to the other queries above.
thanks
raj

jsher,
thanks but none of what i tried from your post seemed to work. i can make the pages wider, by clicking on the little arrows but it doesn't reallyi help with scrolling down to see what's on the bottom of the page.
and i used to send and receive my e mail in a size 12 font. it doesn't seem to hold and i cannot find a control for that either.
estellle thanks for your efforts.

FIREFOX HAS AGAIN CRASHED.WHEN I WENT TO MOZILLA HELP IT SAID THAT THE REASON FOR THE CRASH WAS "EXCEPTION_ACCESS_VIOLATION_WRITE".WHAT IS THIS SUPPOSED TO MEAN?THE CRASH SIGNATURE IS: F1181469137_________________________________________

FIREFOX HAS AGAIN CRASHED.WHEN I WENT TO MOZILLA HELP IT SAID THAT THE REASON FOR THE CRASH WAS "EXCEPTION_ACCESS_VIOLATION_WRITE".WHAT IS THIS SUPPOSED TO MEAN?I SAW THAT THIS WAS THE REASON FOR EVERY CRASH IN FIREFOX.HOW DO WE MEND IT?
PLEASE HELP.

Thank you but there are more important issues going on about my Medical records that are being falsified that I am trying to report and hopefully get help with. I know this isn't the best forum to do this but it is the most secure forum available to me to hopefully get some help with my continuous problem.
Were you able to see the problem of medical record fraud that I have posted in this tread? Thank you for your help.

Can oracle audit logs keep info of Blocking or blacklisting a user ID, terminal or access port, and the reason for the action?

Hello,
I am workin on Oracle 11G STIGs and one STIGs states that audit log should include followings;
- User ID.
- Successful and unsuccessful attempts to access security files
- Date and time of the event.
- Type of event.
- Success or failure of event.
- Successful and unsuccessful logons.
- Denial of access resulting from excessive number of logon attempts.
- Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
- Activities that might modify, bypass, or negate safeguards controlled by the system.
I know how to enable audit trial with OS or DB, EXTENDED levels. However, I could not find if it is possible that audit logs can contain info of Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.

2687254 wrote:
Hello,
I am workin on Oracle 11G STIGs and one STIGs states that audit log should include followings;
- User ID.
- Successful and unsuccessful attempts to access security files
- Date and time of the event.
- Type of event.
- Success or failure of event.
- Successful and unsuccessful logons.
- Denial of access resulting from excessive number of logon attempts.
- Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
- Activities that might modify, bypass, or negate safeguards controlled by the system.
I know how to enable audit trial with OS or DB, EXTENDED levels. However, I could not find if it is possible that audit logs can contain info of Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
Think about that. If the port or terminal (client ip address) is blocked, then the communication never got to the database. So how would the database be able to audit an action that never got there?

I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

Vinod, Can you share detail on how are you sending and how are you reading.

How to trace reason for failure to synchronize customer in OPM Financials

Sirs,
I created a customer in Order Management and process Synchronize Customer in OPM Financials. The result is "Failed"
How to trace the reason for the reason to synchronize?

Sirs,
I created a customer in Order Management and process Synchronize Customer in OPM Financials. The result is "Failed"
How to trace the reason for the failure to synchronize?
thanks!

How to entries reason for movement in MI07 with difference quantity equal 0

I founding that in transaction MI07 can't be able to entried reason for movement if difference quantity equal zero.please help to advise on how to set up config of "Field selection for physical inventory" (Transaction code "0MJU") to allow to entries either difference quantity has zero in base UoM

at least you have to enter a . for optiinal next to the movement types 701 to 708 for physical inventory in OMBS.
And then you have to customize reasons for the movement types 701 to 708.
It is not possible that the user can enter free text as reason.

How to Maintain Reasons for the Opportunity Status in SPRO

Similar Messages

Maybe you are looking for