How to maintain shifts in workcenter

hello guys
could you guys help me in maintaining shifts in workcenter?I know that in grouping you have to define that and then we select it in capacity tab page(capacity header) in workcenter.
plz send me the steps to maintain the shifts in workcenter.
Thanking you guys in advance.

go to work centre,cr02 or cr01,capacities,capacity header,shift tab on the top,pop up menu,will come,there again go to shift interval tab,then in the popup menu,a row will be inserted,there you have to give the validity dates for shifts(i,e,from which date to which date)in the shift type, column you type available shift def,(pp)then save it.
this is the procedure to maintain shifts in workcentre.
if in doubt pl revert.
regards
d.seshagiri

Similar Messages

How to define shift

how to define shift?

Do the following setting in spro for Shift:
Define Shift sequence in SPRO(Production>>> basic Data>>>work center>>>capacity planning>>>Availabale Capacity>>>define shift sequence)
In this step you define the following:
Grouping
Using the grouping you can create shift sequences and shift definitions for special areas (for example, different plants or different areas of a plant) and when maintaining the available capacity choose from between work centers.
Work break schedule
Here you define parameters that describe the individual work break schedules in more detail, as for example:
Start
Finish
Break times
Shift definition
Here you define the parameters common to several work centers that describe the individual shifts in more detail, for example:
Start
Finish
Break times
Validity period of a shift
In Logistics (LO) you can reference daily work schedules from the personnel system (HR). If you reference a daily work schedule in LO from HR and this is changed in HR then this change has a direct effect on changes in LO.
Shift sequences
You can assign the shift sequence of a capacity category as the available capacity at the work center.
You define a sequence of shifts per weekday. The shift sequence represents a collection of shift definitions.
In capacity planning the system uses the predefined values from the shift definition to determine the available capacity of a work center.
The system calculates the following values:
the capacity
the actual operating time for the capacity
Standard settings
The SAP standard package contains settings for various shift sequences.
Activities
You should define the following:
1. groupings
2. shift sequences
3. shift definitions
4. work break schedules
Assign this in work center capacity tap, under intervals and shifts.
Regards
PP

How to maintain budget in 2006 when user in 2008 & vice versa? frame 1 y

Problem:
User could not save changes in original budget in 2006 & in 2008 also.
Description
When user tried to change original budget (FR04) in 2006 year,
then getting a Message on screen
Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list &
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list.
User add & release fund in specific fund center-commitment item which was showing in error list.
After the check-
then getting error Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list
Time frame only shown 2006.
Here how to maintain budget in 2008 when user in 2006?
In Next step
When user tried to change original budget (FR04) in 2008 year,
then getting a Message on screen
Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list &
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list.
User add & release fund in specific fund center-commitment item which as showing in error list.
After the check-
then getting error
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list
Time frame only shown 2007 2008 2009.
here how to maintain budget in 2006 when user in 2008?
Means user can only change budget in 2007 to 2009 when more years coming in timeframe.
Current year :2008
Closed year: 2006
In Fund Management, need change original budget payments in 2006 which is already closed.
Purpose:
Maintain the positive budget in fund center -Commitment item in 2006 & in 2008 which is shwoing in error.
Can we see past-current timeframe at the same time ?

1. copy the frames of your looping animation.
2. create a new movieclip and paste those copied frames onto
this movieclip's timeline
3. from your library drag a copy of the above movieclip to
frame 1 of your main timeline and attach a stop() to that frame.
4. place your login textfield and ok button on frame 1 of
your main timeline.
5. when ok is pressed (and login) passes some condition
direct your main timeline to frame 20.

How to add records or how to maintain list in stored Procedure

Hi,
I am facing an issue in the addition of record in the type
create or replace
TYPE               "PROD_SEARCH_COUNT_TBL"                                          AS TABLE OF PROD_SEARCH_COUNT_OBJ;
create or replace
TYPE               "PROD_SEARCH_COUNT_OBJ"                                          AS OBJECT
( /* TODO enter attribute and method declarations here */
    V_Name Varchar2(500 Byte),
    v_Value Varchar2(500 Byte),
    v_count Number
I want to add records to the type I tried following way
prod_wcf_rec PROD_SEARCH_COUNT_TBL;
SELECT PROD_SEARCH_COUNT_OBJ('Name1','Value1',1) BULK COLLECT INTO prod_wcf_rec FROM DUAL;
    SELECT PROD_SEARCH_COUNT_OBJ('Name2','Value2',2) BULK COLLECT INTO prod_wcf_rec FROM DUAL;
    SELECT PROD_SEARCH_COUNT_OBJ('Name3','Value3',3) BULK COLLECT INTO prod_wcf_rec FROM DUAL;
    SELECT PROD_SEARCH_COUNT_OBJ('Name4','Value4',4) BULK COLLECT INTO PROD_WCF_REC FROM DUAL;
DBMS_OUTPUT.PUT_LINE ('-----------------------------Looping----------------------------');
FOR i in 1 .. prod_wcf_rec.COUNT
LOOP
DBMS_OUTPUT.PUT_LINE (prod_wcf_rec(i).V_Name||' - '||prod_wcf_rec(i).v_Value||' - '||prod_wcf_rec(i).v_count);
   END LOOP;
   DBMS_OUTPUT.PUT_LINE ('-----------------------------Looping----------------------------');
In printing I am getting last records only .So is there any way to add records to PROD_SEARCH_COUNT_TBL
How to add records or how to maintain list in stored Procedure

Every time you BULK COLLECT into a collection type the value is overwirtten. So you need to try something like this.
SQL> create or replace type prod_search_count_obj as object(v_name varchar2(500 byte), v_value varchar2(500 byte), v_count number)
2 /
Type created.
SQL> create or replace type prod_search_count_tbl as table of prod_search_count_obj
2 /
Type created.
SQL> declare
2    prod_wcf_rec prod_search_count_tbl;
3 begin
4    select obj_val
5      bulk collect into prod_wcf_rec
6      from (
7            select prod_search_count_obj('name1','value1',1) obj_val from dual
8            union all
9            select prod_search_count_obj('name2','value2',2) from dual
10            union all
11            select prod_search_count_obj('name3','value3',3) from dual
12            union all
13            select prod_search_count_obj('name4','value4',4) from dual
14           );
15
16    dbms_output.put_line ('-----------------------------looping----------------------------');
17    for i in 1 .. prod_wcf_rec.count
18    loop
19      dbms_output.put_line (prod_wcf_rec(i).v_name||' - '||prod_wcf_rec(i).v_value||' - '||prod_wcf_rec(i).v_count);
20    end loop;
21    dbms_output.put_line ('-----------------------------looping----------------------------');
22 end;
23 /
-----------------------------looping----------------------------
name1 - value1 - 1
name2 - value2 - 2
name3 - value3 - 3
name4 - value4 - 4
-----------------------------looping----------------------------
PL/SQL procedure successfully completed.
SQL>

How to maintain Ztable using function module instead of SM30

Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.

Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    ACTION                               = 'S'
    VIEW_NAME                            = 'Table Name'
EXCEPTIONS
   CLIENT_REFERENCE                     = 1
   FOREIGN_LOCK                         = 2
   INVALID_ACTION                       = 3
   NO_CLIENTINDEPENDENT_AUTH            = 4
   NO_DATABASE_FUNCTION                 = 5
   NO_EDITOR_FUNCTION                   = 6
   NO_SHOW_AUTH                         = 7
   NO_TVDIR_ENTRY                       = 8
   NO_UPD_AUTH                          = 9
   ONLY_SHOW_ALLOWED                    = 10
   SYSTEM_FAILURE                       = 11
   UNKNOWN_FIELD_IN_DBA_SELLIST         = 12
   VIEW_NOT_FOUND                       = 13
   OTHERS                               = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed

About photoshop organizer: how can I shift pictures from one catalogue to another one?

how can I shift pictures from one catalogue to another one?

Sync to computer then from there to other device. Photo stream can be used to sync between devices, but that has to be set up BEFORE the photos are taken.
Read this... import photos to your computer...
http://support.apple.com/kb/HT4083

HT1349 How can i shift my files from iphone into a new android phone?

How can i shift my files from iphone into a new android phone?

There's no files to shift.

How to maintain material master data in plant....

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Hi,
Please check the below link for MMR creaion .
http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
Regards,

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

How to maintained the Text language for CKF keyfigure

Dear All,
Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
Issue in text CKF's:
There is a main CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
We can see only the text in english for total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
It would help to me if any one can answer my question.
Thanks in advance .
Regards,
MQ

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How to maintain serial no for sales order created by BAPI

Hi all,
We are using BAPI for creating sales order "BAP_SALESORDERDAT2" but we are not able to assign Serial number while using this BAPI. Is there any function modul, BAPI, or workarround available to solve this problem. Or how to maintain Serial number.
Regards
Shambhu Sarkar

Hi
It is not possible to to maintain serial numbers with the normal SD
BAPIS. This functionality is not scope of the BAPIS.
regards,
Ramana

How to Maintain the Pricing Condition Records in CRM

Hi
I am new to the CRM
How to maintain the pricing condition records in crm for the particular condition type?
as we do in SD(VK11)
Thanks

Hi Binu,
First of all, you could maintain pricing conditions in the following places:
1. In General Condition Maintenance (GCM)
2. At the product maintenance level
3. At the 'Price agreement' tab of Contracts
4. As manual conditions during order processing at item level
Now, if you want to maintain conditions using GCM, you first have to maintain a condition maintenance group in the customizing where in you can assign condition table and condition type for different counter values. I am assuming that you have done this activity successfully.
When you run the transaction '/SAPCND/GCM', for application 'CRM', your condition maintenance group name and context 'GCM', you will be initially taken to a screen where in you'll have an item area which would be blank and then condition fields would be displayed in a tree on the left.
Here, select the field 'Condition type' and click on icon 'Select records'. You would get a dialog prompting you to enter condition type. Here you can specifiy the condition type for which you want to maintain/view condition records.
If no condition records are available, item area would be left blank. Here, you can choose a condition type using the standard F4 help. Depending on condition types that are assigned to condition maintenance group, different condition types would be displayed in the F4-help using which you can maintain condition records.
Hope this helps.
Regards,
Pavithra
**PS: Please reward points if this helps.

The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.

Validation: How to maintain the entry in GB02C

HI FI GURUS n EXPERTS,
My requirement is that - We want to restrict Negative posting for some GL i.e. For some GL balance should not be Zero.
When I have made the search on SDN, I found it can be done with the help of Validation: OB28 & GGB0.
Currently we are not using any validation. When we use T-Code GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message ID.
I also found that this information is maintained in Table GB02C.
When I use Se16 to see the detail of the table GB02C, I found there is only one entry Bool. Class: FP1 & Message ID 7F.
But I don't know How to maintain the entry in table GB02C & What is the T-Code for it. which message ID I have to create.
Please help.
DSC

Dear Alex,
When I use: GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message Class, I select the Message Class 9 and for Message Class Press F4 and select any message class. System gives an error message: Message ID must start with 'Z' Message no. GB116.
Basically, My question is that: Which T-Code we have to use to maintain Boolean Class & Message Class.
With thanks,
DSC

How to maintain Space between text in Smart form

Hi Experts,
How to maintain space between text in smat form.
For example
I need to maintain like this
Prepared By:                       Passed By:                  Approved By:
    but after save it come like this
Prepared By:   Passed By: Approved By:
How to maintain spaces between texts?
Regards,
Sreedhar.

hi,
we can give space in the smartform in the same way as in the scripts with two commas one space can be given.
when u click on the text in the window ,
there in the general attributes at the left hand side u can find a small icon for editor in that u can define the spaces with the variable to be printed in &var&.

How to maintain shifts in workcenter

Similar Messages

Maybe you are looking for