How to maintain the contact list in the phonebook when i change my sim card

how to maintain the contact list in the phonebook when i change my sim card

The SIM has not affect on the contacts in an iPhone. Unlike other devices, the contacts are not maintained on the SIM card.

Similar Messages

  • I've a new account on iMac.  When composing an email the contact list does not show up on the bar.  WWhen I start keying in a name, it comes up with the address.  How do I engage the  contact list from the email?

    I've a new account on iMac.  When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email.  When I start keying in a name in the email, it comes up with the person's address, which shows it is synced.  How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

    With the New Message window open, go to the View menu and select "Customize Toolbar...".
    In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
    That item should be then added to the Toolbar for the New Message window.
    Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

  • Help!!! My husband by accident synced his account under my account and has merged all of our contacts.  In the process of fixing the mixup has deleted contacts on both phones.  How do I restore the contact list from the original contact list.

    Help!!! My husband by accident synced his account under my account and has merged all of our contacts.  In the process of fixing the mixup has deleted contacts on both phones.  How do I restore the contact list from the original contact list.

    I hope that you aren't complaining about dropped calls INSIDE your condo because no amount of switching or upgrading devices will solve that.
    VZW will not guarantee service inside of any structure. There are just too many factors. If the problem is inside then you might want to look at one of the following:
    1.) Network Extender (may cause issues for others in a condo or apartment style setting)
    2.) A Google Voice Number (Free with a Gmail email address), downloading Google Hangouts Dialer and forwarding your calls to the GVN so that you can make and receive calls over Wi-Fi.

  • I damaged my iPhone 4.  I have ordered a new 4s.  I never backed up or synced my contacts onto my sim card.  Do you have to do that manually or will my contacts be on my phone when I put my sim card in the new iPhone 4s?

    I damaged my iPhone 4.  I have ordered a new 4s.  I never backed up or synced my contacts onto my sim card.  Do you have to do that manually or will my contacts be on my phone when I put my sim card in the new iPhone 4s?  (Will I be able to put my 4 sim card in my 4s?

    The iPhone under normal circumstances does not store contacts on the SIM Card. It can read them, but again under normal circumstances does not write them to the SIM Card.
    When you sync your new iPhone to iTunes on your usual computer you can restore from a Back-Up of your old iPhone to get Contacts and other data and files installed on your new iPhone.

  • I recently bought my 1st iPhone.  It is a 2nd hand iPhone 3Gs. I have inserted the Sim card from my BlackBerry Storm 9500, but I don't know how to access my Contact List on the Sim card. I would greatly appreciate some guidance / advice please?

    I recently bought my 1st iPhone.  It is a 2nd hand iPhone 3Gs 16gb.  I use Vodafone.  The iPhone Version is 4.3.5 (8L1), Model is MC131B,
    I have inserted my Sim card from my BlackBerry Storm 9500, but I cannot seem to find a way to access my Contact List the Sim card.
    Also, I have synced my iPhone with iTunes on my MacBook, but my music doesn't show up at all on my iPhone. Any suggestions please?
    I would greatly appreciate some guidance / advice please?  Many thanks in anticipation...

    You can import the contacts from SIM.
    It is covered in the manual:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • Where are stored / located the contacts list on the blackberry device

    Dear support staff
    from time to time they happen those APP ERROR 523, 205 and so on
    With utilities like BBSAK or BBMCP, you still have access to the devices, but you can save/dump/delete .COD files and maybe input RIM command line interface commands (WOW!, thouhg)
    So the point it is, .COD files looks like to do not contain the contacts.
    Where are located the databases?
    Is there any command line interface to dump them and save them in the case of APP ERRORs and white screens of death?
    Thank you for your kind hints and replies
    Cor

    Hello,
    Contacts are one of the databases stored in the protected AppMemory area, not accessible by any normal means. Rather, what one must do (IMHO) is practice good backup procedures...a recommended set for which is contained within the link in my auto-sig on this post.
    Data recovery is not, and has never been, a reactive venture...protecting ones critical data is a matter of practicing good backup procedures on an ongoing basis.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I phone 4 ..in settings the line with carrier (including the little blue box with the telephone symbol) has disappeared so when i insert a sim card the iphone searches for a network but comes up with no service ! has anybody got any ideas ?

    i was sent a new sim card from orange to change to a new contract . when i changed the sim card i noticed the iphone was looking for a signal but could not find one . when i went into settings i noticed that the line which contains carrier and the blue icon with the telephone symbol had disappeared . any idea how i can get it back ?

    Hello, scooterbenny. 
    Thank you for visiting Apple Support Communities.
    Here are the best troubleshooting articles that I would recommend going through when experiencing this issue.
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    iPhone: Troubleshooting issues making or receiving calls
    https://support.apple.com/kb/TS3406
    Cheers,
    Jason H.

  • Does anyone know to fix the ringer on an iphone 3g after i changed my sims card it stoped ringin

    plz help me i trryd everything

    Check Settings, Sounds. Check the mute switch on the side of the phone.
    While this picture is of an iPhone 4/4S, the mute switch is still the same.

  • Where is the contact list with the lion mail application

    After I installed Lion OS, the Mail application does not have a link to the address book, how can this be fixed?

    Is this what you are looking for?
    Regards,
    Colin R.

  • Forwarding an email to access the contacts list in the "to" field?

    Is there anyway to pull from contacts in the "to" field when forwarding a message instead of typing in first few letters of a name?

    Finally find some solution! (complicated)
    First you have to move your contacts.cdb file from phone to PC (with filemanager it is in system/Data/contacts.cdb) or you can backup phone to memory card and open backup.arc with nbu explorer then export contacs.cdb to somethere on PC. Then you may try to export contacts by noki software (not freeware), or in my case it doesn't work- just open contacs.cdb with any text editor. Then there is a lot of manual work, you have to find telephone numbers,copy them and dial by your "broken" phone. Contact names will display while dialing, and save in dial history. You can write them and phone you just dialed. Hard work, bro, but this is contacts... Good luck.

  • The contact list I get when emailing a photo inside camera is different from "contacts" or the one in my email account and it has incorrect email addresses in it. how do I change it or get rid of it.

    How do I edit the contacts list that comes up when emailing a photo in the camera ap.

    In the future, you might get better results if you post your own thread rather than responding to one that is this old (a year and a half).
    When the contact that is not in your contact lists shows up, tap teh arrow beside it inteh list. The information pop up will give you the opportunity to remove it from the "Recents" list (or add it, if you choose).

  • How to create business card in the contact list

    I would like to create a buisness card to share with other people. What the best way to do that in the contact list.

    Use the zoom slider and the hand tool to zoom in onto the full image and to adjust the position.
    Or make a second version of the photo in if and clip this version to the section with the face.

  • Problem adding contacts to the contact list in PSE7

    I am running PSE 7 with Windows 7. I had a similar problem last February http://forums.adobe.com/thread/581476?tstart=0 trying to update the contact list. The only difference last year is a different PC and I was running XP.
    I am running into the same problem today. In summary I could enter contacts manually or import via Outlook but once I closed the contact list and reopened nothing was updated. I followed all the instructions in John Ellis’s response http://forums.adobe.com/message/2583020#2583020 but it is not working this time. I am not logged into photoshop.com. I saw a link where this fixed someone else who was having a similar problem.
    I have my preferences set to Microsoft Outlook. I am using Outlook 2003.
    Does anyone have an idea what I should try next.

    Yesterday I posted this thread. After I convinced my self that I was properly following the directions given by John Ellis I needed to start elsewhere to resolve the problem.
    What I did was found my contacts.xml file and moved it to my documents folder. I then went back to the organizer and attempted to load the additional contacts expecting the contacts folder to be empty. It was not. I loaded the new contacts using the vcard/desktop method per John’s thread. Now everything is updating and an updated contact folder is in the original location.
    Can anyone explain how the new contact folder acquired all the original contacts?

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • If someone is removed from the contact list...

    If someone is removed from the contact list, but the other person has them on block. Can they view the previous messages? Can they still send messages even after being removed?

    To stop future emails, click 'My Stuff' at top right, select 'Preferences' , then in the next page select the 'Email Notification Preferences' tab and click all the 'No' radio buttons. Then click 'Save'.
    If you already have notifications set on some threads you will still get emails from them. Click on your username at the top, then under 'Actions' in the right sidebar, select "'Manage email notifications.' This will show the threads you've set up notifications on in the past. Select those you want to stop and click the 'Remove Selected Notifications' button at bottom.

Maybe you are looking for

  • Help with setting up printer - works fine on windows!

    Hi Firstly any help is much appreciated! I have an AirPort Express Station with a HP Deskjet D2360 attached to the USB port. I have 3 Windows XP Printers that all print fine. My PowerBook, with Leopard, can located and install the Bonjour printer (us

  • Appraisal Template ID  in which table

    Hi  Friends- In this standard report   RHXHAP_APP_DOC_PREPARE_ORG   one field Appraisal Template is ther  where it shows  8 digit   ID  number  , Now my i have two querys 1) In which table i can see this  Template ID number  as later i have to relat

  • Multiple Label fields within the Parameter List of Available Values

    Hi, I have a business requirement where this is a period number which will be a value filed within a parameter. The labels of the parameter need to be the start date of the period and the end date of the period. What is the best way implement this in

  • Wireless for everyone......

    Hi there, We will start a project at our company that customers coming to us will have the possibilite to surf to the internet with their own laptops. What we would like to do is that this network will be in a seperated dmz and we would like that the

  • JPGs from iPhoto library are recompressed on import? =:-0

    not a question: a verified result! :-/ wasn't Aperture supposed to have a non-destructive workflow? so the question is... maybe something went wrong (what?) and I should retry? thanks paolo