How to Maintain the MM Master Data from one company code to other co code
Hi Experts,
Can any one pls tell me how to Maintain the MM Master Data from one company code to other co code.
Presently we created New plants,New Purchase Orgs under different company code.
1) Material Master data
2) Vendor MAster data
3) PIR
4) Source List
Is there any standard Transactions...??
Please reply.
Brgds,
KK
Hi
Check out the link -
http://wiki.sdn.sap.com/wiki/display/ABAP/StepstocreateasimpleLSMWusingbatchinput+recording
lsmw for data migration for xk01 transaction
http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
Regards
Anand
Similar Messages
-
How to maintain the material master data in plant
Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
BaluCheck the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.
-
How to Send the material master data from sap4.6c to ECC6.0
Hi
Friends this is shalini Shah, i got one requirement that is
how to send the materail master data from SAP 4.6C to ECC6.0 using XI.
i know the file to idoc and idoc to file scenarios but i don't know this one.
please help me friends, Thanks in advance.
Regards
Shalini ShahHi Shalini,
To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3 (4.6 and ECC 6.0)
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
U need to import the IDoc types both inbound and outbound to XI.
1. Create Inbound and Outbound Message interface.
2. Do one to one message mapping.
3. Define an Interface mapping.
ID:
1. Create 1 Sender aggrement.
2. Create 1 Receiver aggrement.
3. Define 1 RD and ID.
4. Only create an receiver IDoc CC.
Regards
San
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way. -
Extend material master data from one plant to another plant
hi,
how can i extend material master data from one plant to another plant.
is there any sap standard transaction for this ie. bdc/t-code.
thanks in advance.......
rahulHi
If you want to extend the material form one plant to another then below are the possible options.
1) MM01 - Use the material in the reference and fill in copy from and to then press enter to complete the extention.This is recommended only if you want to extend very less records.
2) Use LSMW and record MM01 thru BDC recording available in LSMW and make the template in excel and convert it to .txt tab delimited format to upload more records.LSMW is the perfect tool and is used extensively in all the projects.
3) Get the help from ABAPer to create upload program and include the BDC recording.
There is no standard T code available in SAP becoz data mainatenance in the material master will be based on the industry.
Hope it will help.
Thanks/Karthik -
How to track the flow of data from R/2 to BI ?
Hi Experts,
Question: How to track the flow of data from R/3 to BI ?
I want to load master data from R/3 to BI. In BI, i create an infopackage to load data from R/3. Under processing tab i set it as "PSA and then in the InfoObject (package by package)". Its a Full update.
Now, i start the update to InfoObject. The load goes on well.
Now, i want to track the flow of data from the master data table in R/3 to Datasource in R/3 then Extractors and then in the PSA in BI and then till the InfoObject. That is the complete flow of data from source table (in R/3) to Target table (in BI).
Please help me know how this can be done. (For example lets take cost element master data)
Regards,
Suraj S NairHi,
Data flow :
BW :
When u right click on the Master Data Info object -> Select Data flow.Then it will show u the details like DS name,IS (If 3.x)
Once u know the DS then you need to find out the source tables for the R/3 DS.This information will get using ROOSOURCE or ROOSFIELD tables or help.sap.com.
My suggestion better to search in Help site for DS source tables.
DS Tables :
The following link will provide you the source tables for some of the LO DS.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 9:29 AM -
*Journal Entries while uploading the vendor master data from legacy system*
hi SAP Folks,
can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
thanks in advance.
Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PMHi
you will be having only one entry logically
i.e. Opening Bal. clrng A/c Dr.
To Vendor A/c Cr.
regards -
Is it possible to move the master data from one server to onther server?
is it possible to move the master data from one server to onther server?
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
-
Which t.cod to copy in a massive manner the G/L Master data from a Company?
Hi All,
could anyone show me the customizing transaction to copy in a massive manner the G/L Master data from a Company code to another?
Thanks
Moderator: Please, search before postingHi Rossi,
You can do this through transaction code OB_GLACC01. Please check it and let us know if you run into any issues.
For more information check the following area.
SPRO-GL ACCOUNTING-GL ACCOUNTS-MASTER DATA-PREPARATION-GL ACCOUNT CREATION AND PROCESSING-CHANGE GL ACCOUNTS COLLECTIVELY.
Warm regards,
Murukan Arunachalam
Edited by: Murukan_A on Jan 23, 2012 8:47 PM -
Transport Master Data from one server to another server
How can I transport the master data from one server to another server?
Client copy will not be possible.
Regards,
SubhasishHi,
Look at the below link, you will understand
http://help.sap.com/saphelp_45b/helpdata/en/cc/f22c7dd435d1118b3f0060b03ca329/content.htm
Regards
Sudheer -
How to show data from one web site to other web site having diffrent domain.
Dear all,
i want to show the selected data from one web site to other web site.
the location of the two web site is geographically seprated (and diffrent domain)
Please tel me in how many ways it can be accomplished.
If it can be done using jquery then please tel me the function or procedure to do it.
Note: ( i have seen the above behavior in many web sites .
like, i was purchasing some thing but finally declined,
after that i visited some other web sites to gets some other data on other area
, and i show my selected items of the first web site on second website as advertisement.)
i would like to know how these things are accomplished and how it can be done in asp.net.
yours sincerelyHello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do i transfer all my data from one itouch to another?
how do i transfer all my data from one itouch to another?
Try here > http://support.apple.com/kb/HT2109
-
How to transfer the whole address book from one no...
Dear friend,
Could you please advise me "how to transfer the whole address book from one nokia to another nokia phone via blue tooth connectivity. (move one by one is not convenience for my hundreds of contact.
Thank and waiting for advice...
victorIf your phones have the built-in "Transfer" (sometimes called "Switch") application, try it.
Otherwise, depending on the model(s) you can also copy all contacts to/from the memory card, and get them over that way.
And you can also synchronize both programs to the same service (e.g., Outlook on a Windows PC using Nokia PC Suite).
And newer versions of Nokia PC Suite can also be used to make a backup of one phone, and then restore to another.
PC Suite you can find here: http://www.nokia.com/pcsuite -
How to copy data from one planning area to other planning area
Hi ,
I need to copy data from one planning area to other planning area, the MPOS for two planning areas are differant and here my scenario is one planning area having extra key figures.
First i need to release forecast data to CIP planning area and then, i load the data from infocube to MPS planning area and copy the data from CIP planning area. here both MPS and CIP planning areas having different MPOS .
Please help me in this. Please give me the stepls i need to follow.
Thanks in advance.
Regards,
ChanduHi,
You can use the transaction /sapapo/tscopy.
In this you can configure your source plng area and destination plng area. You also have an option to map your KF. There is no problem if the MPOS are different as long as you are able to map the characteristics between the 2 MPOS.
Alternatively, you can create an Infocube which shares common ground between the 2 planning areas and extract data from CIP plng area into the infocube and then copy teh data from infocube to MPS plng area using the the transaction /sapapo/tscube.
Hope this helps.
Thanks
Mani Suresh -
How to migrate the concurrent managers definations from one instance to another
How to migrate the concurrent managers definitions from one instance to another instance by using FNDLOAD in R12.1.3
Greatly appreciate any help on this.
Thanks!Concurrent managers can't be migrated using FNDLOAD -- Tips and Examples Using FNDLOAD (Doc ID 735338.1)
What are you trying to achieve here? Why migrating CMs from one node to another?
Thanks,
Hussein -
Transfer data from one record typr to other
Hi All,
How can we move data from one record type to other record type in Oracle PL/SQL?
Can any one reply me ASAP.
Thanks in Advance,
DhanaLike this
declare
type rec is record(no integer, name varchar2(10));
rec1 rec;
rec2 rec;
rec3 rec;
begin
rec1.no := 1;
rec1.name := 'karthick';
dbms_output.put_line(rec1.no||'/'||rec1.name);
--Now just assign rec1 to the rec2 by element
rec2.no := rec1.no;
rec2.name := rec1.name;
dbms_output.put_line(rec2.no||'/'||rec2.name);
--Now just asign directly
rec3 := rec2;
dbms_output.put_line(rec3.no||'/'||rec3.name);
end;
Maybe you are looking for
-
How can i delete the photos in "Photo Library"
How can i delete the photos in "Photo Library"?
-
Is there a way to set up categories for contacts in the Iphone. My outlook contacts are organized by Personal, business, family ect. Can't fine this in Iphone contacts.
-
How can I add a folder of MP3s to Final Cut so they show up in the media browser?
I have a collection of royalty free audio clips in MP3 format. I would like to get them to show up in the media browser, so I don't have to go to the finder each time to get them into a project. Any idea how to do this?
-
Convert a buffer to another format
Has anybody an idea to convert a buffer from CVID to RAW format?
-
Why do my videos stop playing when I change them from "Home Videos" to "Music Videos"?
I have a bunch of music videos that I loaded onto my iPad Mini but it loads them as "Home Videos". I went into the 'get info' and changed them to "Music Videos" and resynced the device. Now when I go to play a video it acts like it's going to play th