How to maintain the state of a spry collapsible panel

how can i get the index of an open collapsible panel dynamically... i've used two collapsible panels...if the second panel is open, then after page refresh, automatically the second one closes and the default one i.e. the first panel opens....

It is best if you supply a link to your site so that we can see for ourselves what you need to do thus eliminating the need for me to ask you if you have used a collapsible panel group or two single panels. Also it would save my time in trying to reconstruct what I think it is what you want.
Gramps

Similar Messages

  • How to maintain the state in Extn

    Dear all,
    I have created the extn using creative suite for photpshop. when i click my extn name, it will initilize everytime. e.g.if user login the extn and he/she will close the extn. Aftre that when user again hit on my extn. it will initilize, and ask for login again. how could i maintain the state in that case? Any suggestion or solution will appreciated..

    Hi,
    use a setPropertyListener to save the row key of this select item and then restore this key as the current selected key.
    Frank
    Ps.: I don't ask why you call clearForRecreate() on the iterator. I am sure you have a reason.

  • How to apply different styles to multiple spry collapsible panels?

    Hello every.
    I would really appreciate some help with this problem I am coming up against.
    I am creating a website which has multiple Spry collapsible panels in it. I applied the styles I wanted for the first Spry collapsible panel I did in the styles panel with no problems what so ever.
    However when I go to apply the styles I want for my second and every other Spry collapsible panel, when I applied the style I wanted it changed the first panel I did. I’ve tried giving all my collapsible panels different Div ID’s but no luck. I just can’t seem to apply different styles to each of my collapsible panels.
    Can someone please advise me how to do this?
    Thank you in advance for your help.
    Kind regards
    Elliot

    I've figured the most of it out.
    By giving the Spry Collapsible Panel that you want to style differently a separate ID and class and then duplicating the original Spry Collapsible Panel style in the CSS style panel on the right and renaming them the same name as the panel you want to style differently it will allow you to style it differently to all the other panels apart from the Hover.
    I've tried everything! Below is the code I'm using for the two Collapsible Panels I want to style Differently.
    I only want to have different Tab backgrounds and Hover backgrounds
    1st Spry CollapsiblePanel
    Code:
    <div id="CollapsiblePanel1" class="CollapsiblePanel">
        <div class="CollapsiblePanelTab" tabindex="0">Tab</div>
        <div class="CollapsiblePanelContent">Content</div>
    CSS Style
    .CollapsiblePanelTab
    .CollapsiblePanelTabHover, .CollapsiblePanelOpen .CollapsiblePanelTabHover
    2nd Spry CollapsiblePanel
    Code:
    <div id="CollapsiblePanel2" class="CollapsiblePanel2">
      <div class="CollapsiblePanel2Tab" tabindex="0">Tab</div>
      <div class="CollapsiblePanel2Content">Content</div>
    </div>
    .CollapsiblePanel2Tab
    .CollapsiblePanel2TabHover, .CollapsiblePanelOpen .CollapsiblePanel2TabHover
    As I said the Tab works both I have two seperate background images for the Tabs but I can only seem to have one background for the hover.
    Has anyone any ideas on how to get around this?
    Kind regards
    Elliot

  • How to maintain the state in the cluster environment?

    HI Guys,
    I had a list with String values.I deployed the project in the cluster.
    I had a get method which will be invoked by servers in the cluster.
    when the request given by first server. it has to remove the first value in the list.
    when the request given by other server,it has to remove the next value in the list.
    So how to achieve this functionality?
    Regards,
    Praveen

    Hi,
    use a setPropertyListener to save the row key of this select item and then restore this key as the current selected key.
    Frank
    Ps.: I don't ask why you call clearForRecreate() on the iterator. I am sure you have a reason.

  • How to maintain the state of apex_application items

    Hello all,
    I am having a tabular form using apex_application items, In the first column I am having a select list, user is going to select one value from select list and the other columns in that row are populated accordingly.
    Problem is here when user does not found a value in select list, there is a button for adding a new value, when user completes adding the value, I am refreshing the page containing tabular report to display the new value added, in the select list, the thing is that when users selects values in first two rows and in third row he does not found the value he needs and added that value using add form, when user returns back all the previous rows data is vanished, what should I do to retain the previous rows data?
    Thanks
    Tauceef

    Hi Tauceef,
    when refreshing the page the query is executed again. Everything that wasn't saved/submitted before is gone.
    So either save before page refresh or don't refresh the page but only the select lists (using some AJAX magic).
    brgds,
    Peter
    Blog: http://www.oracle-and-apex.com
    ApexLib: http://apexlib.oracleapex.info
    Work: http://www.click-click.at

  • How to maintain the state(opened/closed) of a Hierarchical expanding list

    Hi,
    I've created a list with template "hierarchical expanding". When I click on the list node to go to a page, page related to the node appears but the tree doesn't remain expanded. It always shrinks back to the highest level.
    Please suggest a solution.
    Regards,
    Gaurav.

    Hi,
    use a setPropertyListener to save the row key of this select item and then restore this key as the current selected key.
    Frank
    Ps.: I don't ask why you call clearForRecreate() on the iterator. I am sure you have a reason.

  • Link to tabs in spry collapsible panel work in IE-8; not Firefox or Safari

    I have little experience with Spry. I've asked my question on the user forum in Dreamweaver several times with no response. I am hoping that someone somewhere in the Adobe community can help me resolve this issue.
    I created links from the top of a page to the tabs of a spry collapsible panel underneath.
    In IE-8, on one page, with a small collapsiable panel, clicking the link creates a rollover effect on the appropriate panel. This effect works wonderfully for my purposes.On another page, with a long collapsible panel, clicking the link jumps the user to the panel AND creates a rollover effect. Perfect.
    In Firefox and Safari, clicking the link does nothing. If I right-click the link in Firefox, I create a duplicate of the page.
    I am using Windows XP and Dreamweaver CS4
    http://www.judydiamondstone.net/Writing.html
    click any of the links in the first section of the page
    Thanks.

    Arnout, Thank you so much for the guidance!
    My code now looks like this:
    (Click the first tab
    below to open; click to close.)
    but it still doesn't work
    (I still like the error effect in IE!)
    Do I need to add to the CSS or JS script that comes with the spry widget?
    I am accessing all the tutorials I can find, including a very clear
    explanation of event handlers in a Safari online search but I'm obviously
    missing one or more basic concepts.
    Page with new code on the
    elements:
    http://www.judydiamondstone.net/Writing.html

  • Spry Collapsible Panel at bottom of page - how to make the browser scrolldown automatically

    The question is -
    i have a collapsible panel at the bottom of my page that I'm using as a footer menu.
    It is 200px tall. The visitor clicks on "FIND OUT MORE", then the panel opens 200px tall.
    I want the viewing area of browser to focus on the content of this panel, and automatically scroll down 200px to accomodate the new real estate at the bottom of the page.
    Now they click on it, but then have to manually scroll down.
    How can I do this? What do I add to the Spry Collapsible Panel js scripts?
    I tried using a tag at the bottom of the 200px but can't get it to work correctly.
    Dreamweaver CS5.
    thanks

    I have been closing IE and reopening it for 7 months now. I don't of any other way to reload an applet.
    Jason

  • How to maintain the material master data in plant

    Hi all,
    while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

  • How to maintained the Text  language for CKF keyfigure

    Dear All,
    Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
    Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
    As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
    After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
    Issue in text CKF's:
    There is a main  CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
    We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
    We can see only  the text in english for  total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
    It would help to me if any one can answer my question.
    Thanks in advance .
    Regards,
    MQ

    U can fetch the texts for the items using
    Read_text.
    Example:
        g_f_tdname = xvttp-vbeln.
        g_f_obj = p_obj.
        g_f_langu = 'DE'.
        REFRESH g_t_lines.
        CLEAR g_t_lines.
        CALL FUNCTION 'READ_TEXT'
             EXPORTING
                  id                      = p_var
                  language                = g_f_langu
                  name                    = g_f_tdname
                  object                  = g_f_obj
             TABLES
                  lines                   = g_t_lines
             EXCEPTIONS
                  id                      = 1
                  language                = 2
                  name                    = 3
                  not_found               = 4
                  object                  = 5
                  reference_check         = 6
                  wrong_access_to_archive = 7
                  OTHERS                  = 8.
        IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    The Required fields are,
    Text-id ,language,name,object.
    Let me know if you further require help.
    Regards

  • How to Maintain the Pricing Condition Records in CRM

    Hi
    I am new to the CRM
    How to maintain the pricing condition records in crm for the particular condition type?
    as we do in SD(VK11)
    Thanks

    Hi Binu,
    First of all, you could maintain pricing conditions in the following places:
    1. In General Condition Maintenance (GCM)
    2. At the product maintenance level
    3. At the 'Price agreement' tab of Contracts
    4. As manual conditions during order processing at item level
    Now, if you want to maintain conditions using GCM, you first have to maintain a condition maintenance group in the customizing where in you can assign condition table and condition type for different counter values. I am assuming that you have done this activity successfully.
    When you run the transaction '/SAPCND/GCM', for application 'CRM', your condition maintenance group name and context 'GCM', you will be initially taken to a screen where in you'll have an item area which would be blank and then condition fields would be displayed in a tree on the left.
    Here, select the field 'Condition type' and click on icon 'Select records'. You would get a dialog prompting you to enter condition type. Here you can specifiy the condition type for which you want to maintain/view condition records.
    If no condition records are available, item area would be left blank. Here, you can choose a condition type using the standard F4 help. Depending on condition types that are assigned to condition maintenance group, different condition types would be displayed in the F4-help using which you can maintain condition records.
    Hope this helps.
    Regards,
    Pavithra
    **PS: Please reward points if this helps.

  • Validation: How to maintain the entry in GB02C

    HI FI GURUS n EXPERTS,
    My requirement is that - We want to restrict Negative posting for some GL i.e. For some GL balance should not be Zero.
    When I have made the search on SDN, I found it can be done with the help of Validation: OB28 & GGB0.
    Currently we are not using any validation. When we use T-Code GGB0 --> Financial Accounting --> Line Item --> New Validation
    System shows a pop-up window to select Boolean Class & Message ID.
    I also found that this information is maintained in Table GB02C.
    When I use Se16 to see the detail of the table GB02C, I found there is only one entry Bool. Class: FP1 & Message ID 7F.
    But I don't know How to maintain the entry in table GB02C & What is the T-Code for it. which message ID I have to create.
    Please help.
    DSC

    Dear Alex,
    When I use: GGB0 --> Financial Accounting --> Line Item --> New Validation
    System shows a pop-up window to select Boolean Class & Message Class, I select the Message Class 9 and for Message Class Press F4 and select any message class. System gives an error message: Message ID must start with 'Z' Message no. GB116.
    Basically, My question is that: Which T-Code we have to use to maintain Boolean Class & Message Class.
    With thanks,
    DSC

  • How to maintain a state in webdynpro?

    HI Experts,
    I have one  node and some value attributes(dynamic attributes) in this node.
    I am using these dynamic attributes in wdDoModifyView() to customize my table.I am setting the customisation properties in the Customization view and when I click "OK",the table is getting changed in the Table view.Everything is working fine.But when I again try to customize the table ,I open the Customization view ,the previously modified changes are not there in the Customization view  .Customization view is not holding the state.Its getting reset.
    Please suggest me how to retain the state.
    Regards
    -Sandip

    HI Ayyaparaj,
    I did it in the same way.I created the node in the component controller and maped it with the the two views (Table View and Customization View).The first time when I customize,its working.But next time when I open the Customize view,Customize view not holding the previous state.
    Do i need to do any setting in the Node property?
    Please suggest me.
    Regards
    -Sandip

  • How to maintain the vendor details in sap pi ?

    HI All,
    Here i am working with B2B scenario , can you help me how to maintain the vendor details and client details in parties,'
    here i have 49 vendors.
    control records are changing according to the vendor s .
    Plz help me ......

    Can u help me how to maintain the link between the pi and ecc for identifiers
    Would like to know what your scenario is. Identifier would be required to be maintained in the Party (created in SAP PI) when the scenario is Inbound.
    It is actually the Partner Number for the Partner Profile created in we20 of the sAP ECC system. (you may have to store it as KU or LI) in SAP system.
    Regards,
    Abhishek.

  • How to maintain the contact person in Business Partner ?

    Hi Experts,
    Could you help to resolving the below Requirement.
    __  +Requirement:+__
    How to maintain the contact person in Business Partner ?
    How to get the Contact person in Is-Media Documents?
    Thanks& Regards
    Venkat

    Dear Venkat,
    In SD Customer Master data, we can maintain Contact Person in General Data tab page.
    For my knowledge, we can not find u201CContact Personu201D field in ISM Business Partner u2013 General Data. Correct me if I am wrong.
    Mostly user enters the contact person details in u201CSearch Term 1/ 2 fieldu201D in Address tab page in ISM Business Partner u2013 General Data tab page. While creating ISM Billing Document for this Business Partner, system prints this contact person details in ISM Invoices.
    (Or)
    While creating ISM Order, user can maintain Contact Person name in Header Details(Click on u201CGo to >Header>Details>Purchase Order Data>Cont.Person)
    If you maintain Contact Person name in Header Details also, system print this contact person details in ISM Invoices.
    Check from your end.
    Best Regards,
    Chandramohan

Maybe you are looking for