How to maintain the synchronization between routing and bom in Production V

We are maintaining the Prod version and assigning BOM and Routing to the prod version.
But if user does not assign the mentioned BOM to the respective routing and selects the alternative BOM.
Then how to keep the check the Production Version.
Is any way to keep the Sync between, Prod version and related BOM and Routing.
Amit Shah
Edited by: SAP2511 on Feb 2, 2011 11:56 AM

Dear,
Go to T.Code: C223 enter your plant and press enter you will get the details of the all production version You will get Green light for correct PV's
Select all PV and do the consistency check.
Regards,
R.Brahmankar

Similar Messages

How to establish the connection between crm and r/3

Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
Ajey

Hello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor

How to find the relation between PAY_ELEMENT_TYPES_F and GL_CODE_COMBINATIO

Hi, could someone tell me how to find the relation between PAY_ELEMENT_TYPES_F and GL_CODE_COMBINATION tables
that is because as you could know PAY_ELEMENT_TYPES_F holds the definitions of elements in Oracle HRMS and i need to find the accounting code of each element.
Thanks

Hi;
Please check e-trm site for table relation,integration,explanation etc..
etrm.oracle.com/
Regard
Helios

What's the difference between Routing and Service Callout in ALSB?

I am puzzled by that.
what's the difference between them.
Or what's the situation should use Routing, and that of service callout?

There is little difference between routing and service callout.
Routing is symbolizes the transition of request thread to a response thread starts. (in OSB every invocation of proxy is undertaken by different request and response threads ). So by this definition, there can be only one route node in a pipeline.
Service call out is also used for similar actions as route node , but in pipeline. So service callout can be either in request pipeline (request thread) or in response pipeline (response thread ) . So in a proxy you can have multiple ServiceCallouts but only one route node.
There are some other slight differences.
Manoj

How to find the link between strcture and query technical name

Hi Guru's
How to find the link between Strcture in the query and query technical name. In other way where used list of the structure used in queries?
I know we have table called RSZELTDIR which have the values of strcuture name. from here i do not find any link to query technical name.
Please can anyone help me?
Regards,
Sirisha

Hi ,
For structure and query relationship, the structure has to be a reusable structure( a global one). Then you can right click in on the structure name (in BEX query designer) and select the where used list. You will find all the query names where it is being used.
U can also check out tables RSRREPDIR and RSZCOMPDIR for other query properties.
Thanks,
Amit

How to calculate the difference between intdate and getdate

Hi,
My requirement is to get the data for all the claims where the difference between transactiondate and getdate() should be less than or equal to 7 which means any claims that happened in the past week.
So, my query would be something like this
select * from claims
where transactiondate-getdate < 8
But my transactiondate is in int format such as 20150331 and getdate would be in the format of 2015-03-31. Can someone please help me on how can i achieve the difference between these 2 date formats in the where clause.
Please let me know if you have any questions or if i am unclear.
Thanks

Hi SqlDev12,
Please find the below condition in your query,hope it would help you
DATEDIFF(DD,CAST(CAST(TransactionDate
AS
VARCHAR)
AS
DATETIME),GETDATE())
< 8
Thanks & Regards,
Praveena.

How to customize the link between archivelink and Alfresco

hi,
We are using Alfresco as content manager and we want to scan the invoices according to the "Late Storage with Bar Codes in FI" scenario [http://help.sap.com/saphelp_470/helpdata/en/46/c4317ffc4b11d195650000e82deb58/frameset.htm].
Each scanned invoice will be stored in Alfresco as a pdf file and we want to be able to display it from the sap 'display FI document' transaction (thru 'environment' menu / Additional assignments/object links).
my question is how to make the bridge between sap archivelink and Alfresco for this display ?
how to customize link between archivelink and Alfresco ? Is it possible with customizing only or is it necessary to buy third party software ?
we are working in 4.7.

Hi,
Apparently you need an interface between SAP and Alfresco that implements SAP archivelink.
Once that is in place you can configure a repository in OAC0.
At the link below you find a link to a PDF
http://forums.alfresco.com/en/viewtopic.php?f=14&t=13502
Our company had an own content repository software. It used KGS SAPALINK to make the connection with SAP.
Furthermore CTAC seems to have done development to connect SAP and Alfresco.
Currently we are looking for a new repository system as well. A couple of weeks ago management decided that within some departments Alfresco will be the standard DMS. It would be great if we could use it as content server as well.
Kind Regards
Edmond

How to break the link between photoshop and lightroom when saving a photo?

I've had an ongoing issue with saving copies of photos I import from LR to PS and back into LR. Any multiple copies I make get erased when they move back to LR. My solution has been to save a copy in an extra folder apart from Lightroom and import them in later. It's rough, but it works. But now I have a new demon.
I tweaked a photo in LR, made a copy to keep it safe, then sent the copy over to PH where I did some magic. I Saved As in that special other folder, closed the tab, got the usual box asking if I wanted to save the changes (of course I did), I went back to LR to see both the original and copy changed over to the PS version. I went back to PS, opened the .psd, unclicked the mask, clicked the checkbox, when back to LR and both the original and copy in LR had the mask removed.
I'm missing something here.
There m u s t be a way to break the link between PS and LR so that when I save a copy of a photo I made in LR the original and copy remain two separate photos. Does anyone know how?
Thanks,

I think I am a little confused. What you are describing seems more like a Project Server "Profile" issue, than a SharePoint to MS Project Sync.
If my guess is correct, then you just need to set the default profile to be something other than your computer.
If I am wrong, a screenshot of the error would be really helpful.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

(MHDDK) How to realize the synchronization of read and write for long time by cart PCI6025E

I've finished the programming of the process read and write for the PCI6025E, I can read and write the data now, I wanna synchronize both of the processes, writing the data into the card just after the reading from the card, and check the wave in the oscilloscope. when I use the SEC , it works, but when I changed to MSEC, the wave only come out for a few seconds, even if I bloc 60sec, and also the wave is not steady. why?
so now the problem is how could I write the data immediately which just read and it's for a long time I asked?
Thanks in advance!

Hi Jack,
aiex4.cpp doesn't exist, as far as I can tell. I believe that while the examples were being named, the developer mis-numbered them and just skipped 4 :-S
At any rate, if you already have AI and AO working separately, and you have the I/O performance you application requires, then you may not need to add DMA to your driver. However, if you want to add DMA, it won't be very difficult. In essence, you would need mix code from the S and M Series examples. The S Series example aiex2.cpp shows two things: the few lines of code you need to add DMA objects (lines 70-78), and how to program the STC to use DMA (line 114). And aiex3.cpp from the M Series examples gives a clearer picture of how to control and read the DMA channel.
Thanks, Rolf, for your time and help :-) I'm grateful for your contributions, and I'm glad to see active developers in the DDK forum.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

How to tell the difference between 10w and 12w?

We have:
2 iPhone 5s
1 iPad
1 iPad 2
1 iPad (4) with Retina
I know that the iPhones use the smaller 5w charger, but how do I tell the difference between the iPad/iPad 2's 10w charger and the iPad 4's 12w charger? They look exactly the same.
The iPad 4 takes forever to charge, so I want to make sure I am using the 12w - and I don't want to damage the older iPads by accidentally using the 12w.
Thanks!

Read the fine print on the charger. My iPad 2 10W charger says 5.1V 2.1A. A 12W charger should have a higher number for A.
You can use the iPad 4 charger on your other devices, without damage, to charge them faster.
~~~~~~~~~~~~~~
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

What is the difference between router and network name ?

Hi ... I changed the name of my router in the Airport utility and thought that the network would be changed accordingly. What is the differnce between the 2 ?

I changed the name of my router in the Airport utility and thought that the network would be changed accordingly. What is the differnce between the 2 ?
The name of the router would be the "Base Station" or "device" name. It might be something like RL AirPort Extreme
The name of the wireless network (technically called the SSID) is separate matter. It might be something like RL Wireless, for example.
If you can post back to let us know what version of AirPort Utility you are using, we can provide you with the steps to change either the device name or wireless network, or both.
In order to prevent confusion, you should have a separate device name and a separate wireless network name.
If you are not sure which version of AirPort Utility that you have, click on the AirPort Utility menu in the upper left corner of the screen and then click About AirPort Utility to see the version number.

How to configure the permission between folders and groups programlly?

Hi guys,
I am developing extension for permission, here I have a question:
I have a template which contains more sub folders, for each folder the corresponding group should be assigned by certain permission. for example: group g1 has "write" permission to folder f1; group g2 has "read" permission to folder f2 and so on. I assign these permissions by extension programlly. But now I have to provide the possibility (to user) to configure these permissions, that means if in future instead of group g1 has "write" permission to folder f1, group g1 has "read" permission to folder f1. This kind of change should be allowed by extension. Should I set folders and groups as input parameter in an extension, and give the user possibility to input permission type? In another word, my program is supposed to get the permission from GUI and then create ACL. But where can I set the possibility for user to define the permission? And how can I read this permission?
I hope I explained it clearly enough.
Any help is greatly appreciated!
Regards,
Liying

Hi jennifer,
Find this usefull, follow steps at PAGE 3,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
Regards
Juan

How to decrease the gap between label and input field.. pls respnd

hi friends,
I am facing this problem since long time and couldnt get any solution...
pls respnd,
i need to decrease the gap between my input field and label.. its very much gap there..
thanks in very advacne,
niraja

Hi WD ABAP,
i am doing the same, created tcontainer, and just binded my node. i given matrix layout. But i dont know why it is coming like that.
Also WDABAP, could you pls reply me to the other thread,
about when im trying to read the dropdown value of subnode, the get_static_attribute or create_element method is going into my supplyfunction.
supplyfunction - my code is to fill the dropdown. and due to this supply function triggering,
my get_static_att or create_element is not reruting currenct row dropdown value.
what am i doing wrong.. can u pls pls.. its kicking me. i have spent my whole weekend on this, but couldnt solve this.
plsfnds :(((((
Niraja

What's the difference between routing and rate routing

As we all know that routing normally used in discrete manufacture, and rate routing used in REM, one of my client, the just use routing for REM instead of rate routing, are there any gurus can tell me some detail information about them?
Thanks!
Eric

Hi,
对于routing和rate routing来说，区别并不是很明显，但从流程的角度来说，routing适用于所有的离散型制造业，而rate routing适用于重复制造业！
如果非要找出差别的话，就是routing可以定义并行序和可选序，而且rate routing只能定义并行序！
具体的使用差别可以参考如下链接：
http://help.sap.com/saphelp_45b/helpdata/en/03/bb1d0ca6e811d189010000e8323492/frameset.htm

How do solve the compatibility between windows and itunes?

I can not sign out of itunes from the library.. I click store tab in the library the sign out. the tab turns black and freezes up. I have to shut down and restart .

A picture would be very helpful in demonstrating what you are having trouble with.
Lacking that, I will guess.
VI Properties >>> Windows Size
lets you define the minimum size of a FP window.
Well that's my guess!
Did I win?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to maintain the synchronization between routing and bom in Production V

Similar Messages

Maybe you are looking for