How to maintain WORK for General Cost activity

Hi,
can anybody show me how to maintain WORK for a General Cost activity. In the detail screen I cannot find field WORK, so I also don't know how to confirm for a General Cost activity
Thanks
Long

Hi,
It seems you have 2 different requirment:
1. Maintaining work: Use Internal activity
2. Confirm cost activity: Refer [Link|Actual cost in Cost Activity;
Regards

Similar Messages

  • Conversion error in company code currency for general costs activity

    PS Experts,
    Please guide me in the following , The below message appeared when i created a customer project in CJ20N in our new DEV server
    This is the scenario
    Create customer project with 3 WBSE, each one has 3 NTW and 3 activities, i maintained the cost with currency same as project curr and company code currency in the first two act.
    in the third activity (General act)  in cost tab i put a currency is different than project currency& company code currency and tried to save the project, the message appears.
    note: Company code curr same as projet curr & controlling area curr
    Is there any setting is missing in customizing
    Conversion error in company code currency for general costs activity 0010
    Message no. CK443
    Diagnosis
    For cost activity 0010, a conversion error occurred in the currency of the company code to which the material is assigned.
    Procedure
    Check the global settings in Customizing to be sure the exchange rate for conversion into the company code currency is correct
    Thanks

    Hi Yassin,
    I believe you have maintained exchange rates for rate type M as per your config in OPSB.
    Now do one thing, maintain the conversion rate for P for those currencies in OB08 and then save your project.
    This will solve your problem.
    Regards,
    Kabir

  • Actuals against General cost activity

    I have created one general cost activity and planned for 1000 USD. How I can post actual cost against this activity?

    hi Mady
    Actual post can be post to general cost activity by using trans KB11N
    Select Scrn var. 05 SAP WBS Element/network
    i hope this will solve your problem
    Thanks

  • How much does CC for Teams cost if our team has 3 designers?

    How much does CC for Teams cost if our team has 3 designers?

    Hi Swingle trees,
    Welcome to Adobe Forum,
    Please refer to : http://www.adobe.com/products/creativecloud/buying-guide-teams-enterprise.html
    http://www.adobe.com/products/creativecloud/faq.html#cc-teams
    You can also check if purchasing CC team for single app can help
    you, http://www.adobe.com/aboutadobe/pressroom/pressreleases/201308/080113AdobeCCSingleApp.html
    Please let us know if it worked.
    Regards,
    Rajshree

  • My apple id is not working for my iPhone activation. Please help me.

    my apple id is not working for my iPhone activation. Please help me.
    i'll just restore it.

    Not working in what way?
    Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

  • Hi i want to send an ipad of a gift to a friend in italy, can it be done? will the wifi and 3g still work? also how does it work for a warrenty?

    hi i want to send an ipad of a gift to a friend in italy, can it be done? will the wifi and 3g still work? also how does it work for a warrenty?

    WiFi will work, cellular will work but they may not be able to access LTE, they will have to send it back to you for the warranty work.

  • How to maintain EOIO for JMS to multiple webservices scenario

    Hi,
    I have a requirement that
    how to maintain EOIO for JMS to multiple webservices scenario.
    JMS queue has multiple messages, each message has to be sent to either of 2 receivers.
    How to maintain EOIO in case, when there are 2 receivers.
    Regards
    Sekhar

    Hi,
    since messages are split between 2 webservices receivers, each would have its own SOAP adapter.
    So if order of messages in the JMS queues is M1, M2, M3 and M4 . There is a field based on which split happens.
    Say, if M1 and M3 have to go Webservice1 (will have its own mapping)
    and M2 and M4 have to go Webservice2. (will have its own mapping)
    we'll have two receivers in the receiver determination and hence two Interface determinations.
    The result should be
    M1 delivered to Webservice1
    M2 delivered to Webservice2
    M3 delivered to Webservice1
    M4 delivered to Webservice2
    How will we maintain EOIO in this case?
    Regards,
    Balaji.M

  • How to maintain cluisterview for new business roles in SAP CRM2007

    How to maintain cluisterview for new business roles in SAP CRM2007.
    Table - CRMV_UI_NB
    Regards,
    Biplab

    I also look forward to a 'solved' answer to your question.
    In the meantime, I'm curious to know if there are any organizations today running SAP B1 HANA for their production system.   Would you know of any?

  • How the balance works for http/https in CSS?

    I want to understand how the balance works for http/https in the CSS.
    As per doc,
    - http/1.0=single URL per TCP connection
    - http/1.1=persistent connection.
    Q1. my understanding is http is stateless connection so needs TCP session for each URL. how the http/1.1 works with persistent. keep the same TCP session for a multiple URL request?
    Q2. https is using single URL and continue processing until terminate the https instead of open another URL in the middle of transaction. in this case, I think the client can stick into same service based on the assumption the CSS support persistent. if then, no advanced sticky(ex, srcip) required?
    Q3. looks below both are analogy. what's difference between them?
    - balance srcip(same src IP to the same service)
    - advanced-balance sticky-srcip
    Q4. what's balance decision mechanism for "balance roundrobin" to distribute evenly? ex, in case of multiple URL request coming from same client. evenly distribute URLs?
    Regards,

    Hello,
    first let me clarify 1 point.
    HTTP/HTTPS are standards that are defined in RFC.
    For HTTP/1.1 you can check the following RFC
    http://www.faqs.org/rfcs/rfc2616.html
    Therefore, the behavior of HTTP 1.1 is not defined by the CSS.
    Q1- HTTP/1.1 simply keeps 1 TCP connection to send a received mutiplie HTTP request/response.
    HTTP/1.0 will open 1 TCP connection for every HTTP request.
    Q2- HTTPS is just HTTP over SSL.
    So basically the same rule as above applies.
    HTTP/1.1 can use 1 SSL connection for many HTTP request/response while HTTP/1.0 will use 1 SSL connection for each HTTP request.
    Therefore, if you have customer using HTTP/1.0 you need some form of stickyness to guarantee that every connections will go to the same server.
    Even if only using HTTP/1.1 you may need stickyness.
    A user could disconnect and reconnect and require to be loadbalanced to the same server as before.
    Q3- There is a big different between balance srcip and sticky-srcip.
    The balance srcip simply hash the source ip address to find the destination server.
    The problem of this method is that the loadbalancing is not guarantee to be evenly distributed between the servers.
    With sticky-srcip, you use a normal balance method like round-robin, and then you create a sticky entry in a sticky table.
    Next time this user comes back we first check the sticky entry to find the destination server.
    The advantage is that it guarantess your users will be evenly distributed among the server.
    Q4- roundrobin is applied to connection - not url [by default].
    So if you have 2 users and they both open 1 connection, the CSS will send 1 connection to 2 different servers.
    So each server has 1 connection.
    If one user sens 10 URL and the other 1 sends only 1, one server will have 10 url to process while the other only one.
    That's if you are using HTTP/1.1 and use persistent mode on the CSS.
    You can break persistency and split the url.
    I run out of space and time to explain you everything.
    I suggest you go read the RFC or a book on HTTP.
    Also read the CSS configuration guide.
    There is much more you need to know if you want to take full advantage of the CSS like cookie, ssl offloading, L7 rules vs L3/4 rules, ...
    Regards,
    Gilles.

  • Mac OSX v10.6.5: How's it working for you with Premiere Pro CS5?

    If you've installed Mac OSX v10.6.5, let us know how it's working for you.
    Please make sure that you're using the most recent update for Premiere Pro CS5 before you report back. We don't want to waste our time disentangling problems that were actually fixed in Premiere Pro CS5 (5.0.2) from issues that still exist.

    So, here is my experience:
    http://forums.adobe.com/thread/751458?tstart=0
    Basically:
    Premiere Pro does not want to play the timeline (or the source window) anymore.  Sometime it plays for 2 minutes, sometime for 2 seconde and then stops, but most of time, it wont play at all.
    I can scroll over my timeline (no sound scrolling), but when I hit space bar (or clic on the play button) I can see the play button turning into a square (which mean it's now the stop button), but the timecodes doesn't run and the image doesn't play.
    So I suggest people to not being stupid as I was and to wait before to update... And hope a solution to come soon.

  • Adobe flash wont work for general users in Citrix

    I have a Citrix Xenapp 5 farm 2008 32 bit and I am trying to get Adobe flash 10 player working for general users. It works fine for admins though not when logging a citrix session as a general user (if I give that user admin rights it is fine). I have used the full edition of the installer with different versions and they all dont work for users.
    I ensured that ie security was turned off for both users and computers.
    gave read access to some registry enteries.
    gave everyone group write access to C:\Windows\System32\Macromed.
    I am using the citrix receiver.
    it is not being streamed.
    I excluded the group policies for the test user and still same issue.
    I have tried different versions of flash and nothing has worked. I disabled the gpos for the user and still the same issue. the RSOP didn't have anything that stood out. there was nothing in the event log which gave any errors about it.
    Seems to be a permissions issue somewhere.
    Any ideas appreciated.

    What is your operating system & version?
    What is your browser & version?
    What means "not working" - what exactly happens when you try?

  • How Delta mechanism works for the datasource 0CRM_SALES_ACT_1 in CRM .

    Hi all,
    How Delta mechanism works for the datasource 0CRM_SALES_ACT_1 in CRM .
    I mean timestamp, date etc? And how I can check that
    Appreciate u r response.
    Thanks
    Pramod

    Hi,
    in your system, goto rsa1->tools->assign source system id....
    regards
    Siggi
    PS: I strongly recommend to use the search functionality. This has been asked already a few times.

  • How can I work for Apple to give my Ideas ???

    How can I work for Apple to give my Ideas ???

    Sr. am From Honduras, am on High School, I am creating a new PC that will be a Tablet but also will display a Image in a bord or any place like a Datashow, I know that i cant send my Idea but I really want to work with them that is my dream,  Look this Image:
    I have heard about the Campus I will like to go there, and learn more

  • How to maintain keywords for a original files in DMS?

    Hi,
    How to maintain a Keywords for all original files which are already available in content server? I have done the following steps for full-text search(content search) with in originals.
    1.Configured RFC from TREX to R/3
    2.Created SSR with VERITY search engine
    3.Configured MIME types in DMS
    4.Indexing has been done
    5.We ran RSTIRIDX program as a background job.
    After doing above all for activating full text search in CV04N,  The text box search text is enabled, how ever when we try to search for a text in original we are getting the message:"No documents found with these selected parameters".
    Awaiting for your valuable response.
    Thanks
    Prasad

    Hi Prasad,
    could you please test the search behavior also in transaction SKPR07 because this transaction offers different tools for testing and analysing the TREX search. The class for DMS is DMS_PCD1.
    Best regards,
    Christoph

  • Maintaining percentage for different cost centers

    Hi All,
    we have one Expense GL a/c: 45010 (Electricity)
    when the expenses occur... the amount hits this GL a/c
    Example GL amount = 50,000
    Now we want to maintain the percentage for different COST CENTERS....
    & that 50,000 should be distributed automatically to respective cost
    centers depending on %
    So how do we go about it...please advise

    Hi,
    look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/49/4398375ae2f84ae10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/08/514e2143b511d182b30000e829fbfe/frameset.htm
    A.

Maybe you are looking for