How to maintian Distribution Profile ?

Dear All:
We have use apply SAP package AFS (Apparel and Footwear ) .
There is a special function "Distribution Profile" when create BOM.
But I can't find out where to create Distribution Profile.
Hope someone can tell me how to create "Distribution Profile".
Thanks a lot.

hi
You can define a quantity distribution profile for the following cases:
The header material of a BOM and its component have the same grid.
Due to the automatic grid value assignment, a consumption quantity was assigned to each grid value that corresponds to the default quantity at component level. In this case it is advantageous to use the quantity distribution profile only for grid values, whose consumption quantity deviates from the default quantity. You can use the same quantity distribution profile for the assignment of different materials that are based on the same grids.
The header material of a BOM and its component have different grids.
When using the quantity distribution profile, it is not necessary to manually assign grid values. You can use the same quantity distribution profile for the assignment of different materials that are based on the same grids.
It is advantageous to use a quantity distribution profile in the BOM if you use only a few grids to define the characteristics of many materials. Then you can use the same quantity distribution profile again and again.
-ashok

Similar Messages

How to return a profile in Game Center. where you want to enter the old nikneim?

How to return a profile in Game Center. where you want to enter the old nikneim?

It's not actually round. It is slight flattened vertically.
Anyway...
I have an Action that places guides at 50% (50pc) vertically and horizontally to give me the exact center of an image file, or you place them manually with View > New Guide.
After doing that I would place the circular select from that center point using Shift and Alt (Opt) and get it more or less where I wanted it. Then change the selection into a work path.
You can use Free Transform to reshape and position that work path by selecting it in the Paths panel.
Then place your text, and if you still need to fine tune, use Free Transform again, but on the Type layer.
You could also use Free Transform to reshape the BG graphic to make it round.

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

How to get the profile object in simple java class (Property accessor)

Hi All,
Please guide me how to get the profile object in simple java class (Property accessor) which is extending the RepositoryPropertyDescriptor.
I have one requirement where i need the profile object i.e i have store id which is tied to profile .so i need the profile object in the property accessor of the SKU item descriptor property, which is extending RepositoryPropertyDescriptor.
a.I dont have request object also to do request.resolvename.
b.It is not a component to create setter and getter.It is simple java class which is extending the RepositoryPropertyDescriptor.
Advance Thanks.

Iam afraid you might run into synchronization issues with it. You are trying to get/set value of property of a sku repository item that is shared across various profiles.
Say one profile A called setPropertyValue("propertyName", value).Now another profile B accesses
getPropertyValue() {
super.getPropertyValue() // Chance of getting value set by Profile A.
// Perform logic
There is a chance that profile B getting the value set by Profile A and hence inconsistency.
How about doing this way??
Create PropertyDescriptor in Profile (i.e user item descriptor), pass the attribute CustomCatalogTools in userProfile.xml to that property.
<attribute name="catalogTools" value="atg.commerce.catalog.CustomCatalogTools"/>
getPropertyValue()
//You have Profile item descriptor and also storeId property value.
// Use CustomCatalogTools.findSku();
// Use storeId, profile repository item, sku repository item to perform the logic
Here user itemdescriptor getPropertyValue/setPropertyValue is always called by same profile and there is consistency.
-karthik

How to create distribution list in workflow? for sending mail or work-item

Hi,
How to create distribution list in workflow? for sending mail or work-item to multiple users.
Regards,
Surjith

Hi Surjith,
A.Working with Distribution Lists Creating a Distribution List.
1 Businees Workplace->shared folder - create new subfolder name = WF_distributor
2.Then click on the distribution list in Businees Workplace.
say create Name = WF_Vliste
folder Name = WF_distributor
3.distribution list content tab
Enter Recipient (SAP User ID)
B.Wrkflow Builder
Find out the dialig step in which u want to use distribution list
Use workflow Rule 30000012 (SWX_READ_DLI).
Maintain the binding from workflow container to rule container.
Just pass the name of the distribution list from WF to Rule container.
Regards
Sagar S

My Distribution Profile is grayed out in Code Signing Provisioning Profile

Fellow developers, has anyone experienced this problem when you tried to compile your app for distribution:
Did everything as suggested in this forum, including:
- copying a distribution profile to the right folder and also draging over the Xcode icon
- Adding a "Distribution" configuration
- specifying the identity as "iPhone Distribution: My Name"
However, in the "Code Signing Provisioning Profile" picker, when "Any iPhone OS" is selected, the only enabled choice is "Default ..." and the actual profile with my name is grayed out.
More over, the moment I select "Distribution" and then select "Device" in the "Active Configuration" picker, Xcode closes. This behavior can be reproduced all the time.
Any suggestions?
Eugene

It is normal that it is grayed out ( don't ask me why ). To activate the distribution build, duplicate your Release in Distribution, install all the required certificates ( please apple stop those, they're a nightmare to deal with ) , then in the build settings in the code signing you have to TYPE ( there is no drop down box as seen in some screenshots ) "iPhone Distribution" ( instead of "iPhone Developer" ) and tada a few lines below you should see your drop down modified with some distributions entries.
Patricia.

How to Get user profile properties in provider -cloud hosted app in sharepoint online - office 365 using REST API?

How to Get user profile properties in provider -cloud hosted app in sharepoint online - office 365 using REST API?
any idea?

Hi,
From your description, my understanding is that you want to get user profile properties in provider-hosted app in SharePoint online using REST API.
Here is sample code for getting user profile properties:
http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
Here is a blog below about accessing data from the provider-host apps:
http://dannyjessee.com/blog/index.php/2014/07/accessing-sharepoint-data-from-provider-hosted-apps-use-the-right-context/
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to include Distribution list in Bex Broadcaster

Hi experts,
Can anyone tell me how to include distribution list in bex broadcaster?
We have created a distribution list which we use in SBWP tcode for sending reports through mail.
I want to try broadcasting reports through Bex query designer and scheduling weekly. Although bex broadcaster
provides us the facility to enter the email ids of user but it is very tedious to type all the ids. Can i incorporate
the distribution list, which we have already created, in broadcaster?

Just to close this topic.
I have reported a bug to Android project, because bottom-line they are responsible for the error - not SAP BEx.
Anyone interested can see the bug report here:
[http://code.google.com/p/android/issues/detail?id=24257]
If you decide to look at the bug report, please mark it with a Star to bring focus on this problem.
Best regards,
Jacob

Distribution Profile

Regarding building the app with "Device - 3.1 | Distribution" option in XCode - is this profile/option used *only* to build the app for putting it in the App Store (using iTunes Connect) - or can I use it to install the built app on the device also?
I am asking because I am trying to build it with distribution profile and trying to install it on the device, and I get "A valid provisioning profile for this executable was not found" error.
Sam

Shnaps wrote:
Regarding building the app with "Device - 3.1 | Distribution" option in XCode - is this profile/option used *only* to build the app for putting it in the App Store (using iTunes Connect)
Yes.
- or can I use it to install the built app on the device also?
No.
I am asking because I am trying to build it with distribution profile and trying to install it on the device, and I get "A valid provisioning profile for this executable was not found" error.
That's the expected behavior. When building for Distribution, make sure you select "Build", not "Build & Go".
\- Ray

How to default distribution account through purchase requisition, selecting the project expenditure type

Dear All,
How to default distribution account through purchase requisition, selecting the project expenditure type
Thanks
Abdul.

Hi Abdul,
If you meant defaulting Purchase Order distribution accounts from the (backing) requisition, then the accounts from requisitions will default into the autocreated PO.
If you seek to default distribution accounts for Purchase Requisition using Projects, then the account generator need to have customized rules defined to default account for project enabled distributions based on the Project/Task/Organization/Expenditure Type/Date combination entered.
This note is an extract from the user's guide, and has good detail on defaulting rules of accounts for Purchase Documents:
How Does The Account Generator Default The Accounts In Oracle Purchasing? (Doc ID 1067139.1)
Hope this helps.
Vanha

How to get the profile name

I did not know how to get the profile name in photoshop file using javascript? Kindly help me.

var myDocProfile = app.activeDocument.colorProfileName;

How to check user profile service working in sharepoint 2013?

HI All,
How to check user profile service working or not in sharepoint 2013? Thanks.

Hi,
Select which OU's you want to synchronize, then check if all users in those OU's have a user profile in the user profile service application.
Nico Martens - MCTS, MCITP
SharePoint 2010 Infrastructure Consultant / Trainer

Reg. Distribution profile during MM01

Dear Exports
During material creation, in distribution profile field I gave 001 then the following error occured.
Error determining plant distribution profile for plant 1001
Message no. W#442
Diagnosis
An error occurred determining the plant distribution profile for plant 1001.
Diagnosis
Plant 1001 does not exist.
No distribution profile has been specified for plant 1001 in plant master data.
The distribution profile specified for plant 1001 in plant master data is not defined in Customizing.
Procedure
Check the plant master data for plant 1001.
Check the Customizing settings for the plant distribution profiles.
Pls help me giving steps to solves the problem.
Thanks
Rajakumar.K

Thank you so much for your response. Sorry, I should have mentioned that we are not using the Retail functionality. We are trying to use this field for reporting purposes and have been unsuccessful in getting even the defaul distribution profile to work. When trying to select this in MM02, we get the following error:
Error determining plant distribution profile for plant XXXX
Message no. W#442
However, I did follow what you said. SAP gave me a lot of warnings that we are not setup as a retail system, but I went ahead and assigend the Default 001 to the plant in use. This did work, but I'm wondering if this is the best route.'
Thanks again for all of your information, and if you have a more efficient option, please let me know.
Thanks!
Joe

How to create Partner profile

1)Could someone tell me how to create partner profile in file to idoc scenario.
2)How to create RFC connection.
3)How to use IDX1 and IDX2.
Thanks
Regards
Ashish

Ashish,
take a look at this article,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
XI ~~
1. SM59 -- Create an RFC destination for R3 system.
2. IDX1 -- Create a port to R3 system
3. IDX2 -- Import IDOC metadata.
SLD ~~
Create technical system and business system pointing to the R3 system and use this as you reciver system.
Let me know if you need any inouts.
Regards,
Bhavesh

How to Create Roaming Profile(s) For Windows Workgroups

This Tutorial Shows how to create roaming profile(s) for Windows Workgroups.
Here are the steps in order to do this:
On the host PC:
1. Goto 'Folder Options'>'View' and un-tick 'Use Simple File Sharing'.
2. Goto Network Connections and right click on the 'Local Area Connection' (Ethernet recommended)
3. Goto Properties>General, and tick 'File and Printer Sharing'.
Click Apply + Ok.
4. Goto Control Panel>User Accounts, add a new user.
5. Logon to this user, and open the profile folder properties.
5b. Share this folder.
6. Make the Share permissions so that 'everyone' has: Full Control, Read, Change.
Click Apply + Ok.
7. Click on 'Caching' and disable Caching for this Share.
Click Ok.
8. Now goto the 'Security' tab and give 'Administrator' and 'SYSTEM' 'Full Control'.
Click Apply + Ok.
On the remote PC(s):
1. Make the same User as on the Host.
1b.Logon to the account and log back out again. Delete the profile folder from 'Documents and Settings'.
3. Give 'SYSTEM': 'Read','Read and Execute','List Folder Contents' to the 'Administrators' Profile
4. Type 'lusrmgr.msc' into run, goto: 'Users', double click on the new user and goto the 'Profile' tab.
4b. In the 'Profile Path' box, type \\hostPCname\ProfileName.
Click Apply + Ok
*Note* Replace the \\path\ accordingly to what names are on your Host PC.
5. Goto regedit>HKLM\Software\Microsoft\Windows NT\CurrentVersion. Double click
on 'ProfileList'.
Find which key is for the new user. (Example S-1-5-21-58435627-18431725-18026167-1003)
6. Right click that key and goto: 'Permissions' and give 'SYSTEM' 'read'.
*Note* Once you logon to the roaming profile from the remote PC for the first time you can undo this step.
7. goto GPEdit>Computer Configuration/Administrative Templates/System/User Profiles:
Enable these settings:
'Do not check for user ownership of roaming profile folders'
'Delete cached copies of roaming profiles'
'Log users off when roaming profile fails'
"Add the Administrators security group to roaming profiles'
'Prevent roaming profile changes from propagating to the server'
7b. Make 'Timeout for dialog boxes' '1' (seconds)
8. goto: Computer Configuration/Security Settings/Local Policies/Security Options:
Make 'Number of previous logons to cache (if server is unavailable) '0'
Now you're ready to login to the Profile on the remote PC.
*Note* Sometimes, when windows loads it takes a minute for the profile folder to become shared again.
Thanks for reading.

Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka

How to maintian Distribution Profile ?

Similar Messages

Maybe you are looking for