How to make 0datefrom a compounding key to master data having single key ?

Dear Experts,
I am trying to add 0DateFrom to compound a master data object via RSD1.
In the Compounding tab, i keyed in the 0DateFrom and tried to activate but system does not allow :
Message :
Characteristic ZCONxxx: InfoObject 0DATEFROM is not allowed in the compound
Message no. R7596
Diagnosis
InfoObjects 0DATETO 'Valid to' and 0DATEFROM 'Valid from' are not allowed in the compound.
System Response
Characteristic ZCONxxx can not be activated.
Procedure
Define attributes or the texts for the characteristic as time-dependent. The fields 'Valid from' and 'Valid to' will then be automatically included in the master data tables or text tables.
I then followed the advise on from the message and ticked the DateFrom attribute in the master data. This attribute is existing one. But the system says :
Characteristic ZCONxxx: Attribute 0DATETO cannot be used w. time-dependent attribte
Please advise. I must compound the master data with datefrom. How can it be done when BI disallows?
Thanks in advance.
regards
Pascal
Edited by: Pascal Gabin on Aug 15, 2011 10:47 AM

Hi
In SAP standard reminders are triggered based on requirement type 103 (dunning). Instandard it is assigned to output type MAHN. You can create a new requirement by modifying requirement 103 which considers confirmation entered in PO. Then it can be assigned to the reminder output type in output schema.
Regards
Antony

Similar Messages

  • How to make Department field in cost centre master data a required field?

    Dear Experts,
    I want to make the Department field in the cost center master data as required field.....how do i do it?
    regards
    Suresh

    Hi Sursh
    Create a transaction varinat through SHD0.
    For the department field, activate the Requred check box field.
    Then activate the variant.
    Regards
    SAP Student

  • Hey guyz can u help me out on how to make an apple ID on iPhone 4s without having a credit card information

    Hey guyz can u help me out on how to make an apple ID on iPhone 4s without having a credit card information

    http://support.apple.com/kb/ht2534

  • How to make the Region Fild in Vendor Master as a Mandatory?

    HI All,
    can anyonde guide me about:
    How to make the filed: "Region" in Vendor Master a Mandatory while entering the Data.
    PL.help.
    Thanks,
    Roopan.

    Hi
    Go to T-code OBD3.
    Check with account group you use for the vendor.
    Double click on the account group.
    Double click on the general data and on then on the address group. You can maintain region here as Mandatory.
    Reward if this helps
    Thanks

  • How to make a function return number(10,0) data type (ORACLE 10g)?

    With 10g, how to make a function return number(10,0) data type?
    here is the function, it returns a number type :
    create or replace FUNCTION Get_portfolio_Id3 (p_HistObjTable In Varchar2,p_LHISTOBJID IN NUMBER) RETURN view_cpu_STD_Asset.LPORTFOLIOITEMID%Type IS
    v_Id view_cpu_STD_Asset.LPORTFOLIOITEMID%Type;
    BEGIN
    If p_HistObjTable ='amPortfolio'
    then v_Id:=p_LHISTOBJID ;
    elsIf p_HistObjTable = 'amComputer' then
    select litemid into v_Id from smcdba.amComputer c where c.LCOMPUTERID=p_LHISTOBJID ;
    else v_Id:=-99;
    End If;
    RETURN v_Id;
    END Get_portfolio_Id3;
    Thanks.
    Message was edited by:
    user631701

    create or replace FUNCTION Get_portfolio_Id3 (p_HistObjTable In Varchar2,p_LHISTOBJID IN NUMBER) RETURN view_cpu_STD_Asset.LPORTFOLIOITEMID%Type IS
    v_Id view_cpu_STD_Asset.LPORTFOLIOITEMID%Type;
    BEGIN
    If p_HistObjTable ='amPortfolio'
    then v_Id:=p_LHISTOBJID ;
    elsIf p_HistObjTable = 'amComputer' then
    select litemid into v_Id from smcdba.amComputer c where c.LCOMPUTERID=p_LHISTOBJID ;
    else v_Id:=-99;
    End If;
    RETURN round(v_Id);
    END Get_portfolio_Id3;

  • How to make Buyer and Planner fields in Master Items Form Required without

    How to make Buyer and Planner fields in Master Items Form Required without using personalization?
    1) Steps to Reproduce
    Under Application Developer Common Modules responsibility,
    1) Query Region MTL_SYSTEM_ITEMS
    2) Click on Region Items
    3) Add Buyer Id and Planner Code attributes with Required checkbox checked.
    4) Bounce iAS server and JVM and clear java cache
    5) Changes not taking effect
    Current Application Release: 11.5.10.2 (3460000)
    Current INV Rollup: INV.J RUP22 (9878808)
    Current WMS Rollup: WMS RUP19 (9951502)
    Product Installation List :
    Product Installation: 11i.BOM.J: Installed
    Product Installation: 11i.EGO.E: Installed
    Product Installation: 11i.ENG.I: Installed
    Product Installation: 11i.INV.J: Installed
    Product Installation: 11i.PO.I: Installed
    Product Installation: 11i.WMS.G: Installed
    client needs to make the Buyer and Planner fields under Inventory->master Items form to be required.
    He tried using the Application Developer Common Modules responsibility, to find the Master Items Region and added the Buyer Id and Planner Code attributes with the Required check-box set to Yes. He bounced the iAS server and cleared java cache, but the changes do not take effect.
    client does not want to use form personalization.
    Can you please provide more assistance for using Application Developer Common Modules responsibility?
    Edited by: jemar98 on Aug 9, 2011 1:44 PM

    A forms developer could make those fields required with a CUSTOM.pll extension if you didn't want to use forms personalization. Both are considered customizations to standard functionality and may or may not require rework after patching or upgrades.

  • Key figure - master data info object

    I have been asked to create a master data info object for the object "users" and this is this how the data looks like in the flat file. The object users is a key figure. Can I create a master data object for key figures. Let me know , if I am missing something.
    State----Grade Level----users
    AL--0--
    53,520
    AL--1--
    57,423
    AL--2--
    56,172
    AL--3--
    57,859
    Thanks

    Hi Pooja,
    You cannot create master data for a key figure. You can include a key figure as an attribute for another characteristic though. If you need to store values that are in the form of numbers, you can create your char of type NUMC.
    Please let us know more about your scenario so that a better solution may be proposed.
    Hope this helps...

  • How to use the customer types in customer master data

    how to use the customer types in customer master data?
    menu path is Extras -> account group info -> customer types

    hi,
    This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
    default sp ,consumer.
    See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
    I hope this clarifies your quiery.Reward points if so.
    Thanking you,
    Best regards,
    R.Srinivasan

  • Compare time depednt master data for two key dates in a report?

    Hello all,
    We have a requirement where we want to see the difference in master data at particular key dates (time dependent master data).
    Like if employee has State = OH till yesterday (12/01/2008) and today it is changed to State =KY (12/02/2008 to 12/31/999) loaded in BW which is time dependent.
    So basically if you run the query for Key date 12/01or before you will see OH as state and if you run query for key date 12/02 or further you will see KY.
    We want to create a report where we want to list employees and compare in two columns basically the previous value and the current value. So input would be two key date variables and the report would look like
    Employee                  Key date 1(state)                  Key date 2 (state)
    Employee1                         OH                                  KY   
    Has anyone done this before, can someone help me doing this?
    Thanks,

    Hi ,
    For this scenario , Can you please create variabale ( From value -- to value ) in the key figure date .And by using the time period in the varaible u can get the employees for both the states ...
    Hope this helps out
    thanks
    PT

  • How to Make a Infoobject as Mandatory while Uploading data

    Hello All,
    I have a Infoobject ZPOS_CAPO which has below attributes,
    ZPOS_ZIPC
    ZPOS_TYPE
    ZW_LKCAPO
    ZCOMP_COD
    ZPOS_LAPO
    While Uploading the data from flat file, i have to make ZCOMP_COD as a Mandatory.
    When the data is not avialble for ZCOMP_COD , it has to throw an error message?
    While Uploading the data manually, how can i make ZCOMP_COD as a Mandatory? I mean Without entering value for ZCOMP_COD , it should not save record.
    Suggest me if you have any idea on this.
    Regards
    Naga

    Hi ,
    I am updating the data Manually for ZPOS_CAPO.
    Like below procedure
    selecting zpos_capo right click selecting Maintain Master Data
    then it is asking below Entries
    Point of Sale- APO c
    Language Key
    Point of sale - ZIP
    Point of sale type
    Warehouse link APO c
    Company Code
    Point of Sale  - APO
    Here when saving the entry with out Company COde value, the entry should not save.
    But for Me it is saving the entry. So I have to make Company Code as Manadatory.
    I do not have any Infosources for this.
    Help me
    Regards,
    Raju

  • How to make html file from a text field data

    hi!
    I want to know how to make a file with .html extension and the data in this file should be from a text field. like i want to enter some thing in a text area and have to place it in a file on server side in html formate.

    so you told us what you want, but what is your question?

  • How  to make the search term in Vendor master (XK01) as List box

    Hi,
    I got the requirement to make the search term in Vendor master (XK01) as List box. Is there any way to reach this requirement.
    Thanks in advance
    Suman

    Hi
    U should change the std dynpro
    Max

  • How to use LSMW on CRM for bulk master data creation?

    Hello Experts,
    I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
    We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
    Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
    Please give me documents / links etc that is relevant.
    Regards,
    Rohit

    Hi,
    I have looked into your query.
    These are some information which might be useful to you.
    What is LSMW?
    Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
    One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
    Steps to take
    1. Create text file with data to be loaded
    2. Set up and run LSMW
    The following link will provide good information on LSMW Idoc method:
    [http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
    I hope this helps.
    Regards,
    Venkat

  • How to create new field groups in AA master data screen layout?

    Hello,
    We are using ECC 6.0
    We have created bunch of new fields for asset master data, but we want to make them visible only for particular asset class. So we need to customize in SPRO Asset Master Data Screen Layout, but there no specific field groups that we can customize. So how to create and add new field groups to manage them by radiobuttons Required, Optional, No or Display?

    hi,
    think, it's not possible.
    look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
    "The field groups and their respective fields are defined in system tables"
    kind regards
    Andreas

  • How to delete Business partners in Business partner master data

    Dear sir,
    I had  remove some business partners in Business Partner maserdata. but i will remove some business partners one error will come into picture that error is " You cannot remove business partner; linked Sales Quotations exist  [Message 3502-79] "
    How to remove that bp in bp master data. plllz tell me how to solve these problem step by step process in sap business one 2007 B

    Hi,
    If you have created a Sales Quotation or for that matter any document for  the Business Partner you are trying to delete, you cannot delete the Business Partner from the database.
    As transaction and document is linked to the BP, then you cannot delete it.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

Maybe you are looking for