How to make a blank TOC.

The TOC won't let me leave it blank.** The elements in the template are not delete-able.
I want to get rid of it because my picture book opens up with thumbnails of the pages (in the TOC) instead of full sized pages. Is there a fix for this?
**Referring to your comment:
"Crafting a chapter-less book is possible, but a minimum of one section is required. Remove the chapeter lbl, leave the TOC blank and then you'll have a basic/generic point from which to work with. Use the 'File/Save As Template' menu before modyfying further if you want to reuse later, etc."

For these and other questions, it may help to see:
Publishing With iBooks Author
http://shop.oreilly.com/product/0636920025597.do

Similar Messages

How to make a blank menu in Adobe Encore CS6?

When i create a 'new menu' in Adobe Encore CS6 it automatically turns into a 'party menu'. This didn't used to happen. Its only just started.

I think "new menu" creates a new menu using the default - chnage your default to the blank menu.

When I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

when I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

Did you check the home page setting to make sure that if doesn't have pipe (|) symbols?
See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

When the page will be load how to make the page blank in run time

Dear
when i will run the page the fields shoud come with blank Field.
i want to make it in runtime.
example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come, after thar i will create.

duplicate how to make the page blank field in runtime

How to make lines for "fill in the blanks?" (iWork Pages 09)

This should be easy since it's something many people do: design a form for others to fill out with a pen or pencil. However, I can't find any information regarding how to make a line after text, like this:
Name _________________ Address _________________________________ Phone __________
...without using the underline character.
Back on the Clarisworks days there was some way to make nice neat lines after text using tabs. However, It's been so long that I can't recall how it worked. I've Googled this issue using every logical term I can think of but found nothing useful. The Pages 09 help file and the user guide seem to be mute on this subject. The Word 2008 help file is similarly silent. However, I'm sure that the greater Pages community knows the answer to this one.
Thanks,
Bill

What you want is called a tab leader. In Pages, to create the underline:
To create a new tab stop using the Text inspector, click in the document where you want to create a new tab stop, click Inspector in the toolbar, and then click Tabs. Click the Add button in the bottom-left corner of the Tabs pane. The new tab stop appears in the Tab Stops column.
Then use the Leader drop down menu to choose a solid line:

How to suppress a blank section in crystal report

how to suppress a blank section in crystal report. although i have set the property
"suppress blank section "=true ,still i m unable to suppress my section
please help me to cope up this issue.
thanks in advance

One recommendation I make, when troubleshooting suppression issues, is to put a visible border of the section, area or object to be suppressed, and borders for all objects contained in the section or area. This will help isolate what's suppressed, and whether the section is truly blank or has content that's blank.
Furthermore, I recommend indicating which SDK and what version you're using when posting.
Sincerely,
Ted Ueda

How to make multi-box fields for name or address in a PDF form to be filled in?

I would like to know how to make fields for name and address in a PDF form.
I am now using Acrobat 8 Pro on Windows Vista. I have downloaded a form in the format of a PDF file. Basically it is just a file holding images of pages of the document, and there are no fields for me to type something on it using computer. This form will be used frequently by me, but I don't want to print it out and fill it in every time by hand. I want to fill it in in the computer and print copies of it when needed. The output will then be much more neat and tidy.
I have seen PDF forms with blanks for typing name and address, which means the form can be filled in on the computer before printing. They are special, as these blanks allow users to type name and address with every character occupying a box in the field, which consists of ten boxes or so. These are not ordinary textfields. I want to make similar inputting field as well.
Does anyone knows something about making these input fields with each character using 1 little box in the multi-box field? Any ideas are appreciated.

Does anyone knows something about making these input fields with each
character using 1 little box in the multi-box field?
Use text fields with the comb of x characters feature.

How to make form register in adobe edge?

hy, how to make coding form register in adobe edge? please help me

hy, master uboss..
could i ask again?
i was tried it as your suggestion but after i fill it data still cant send to database..
could you give some suggestion longer?
file connection.php
<?php
$host = "localhost";
$user = "root";
$password = "";
$database = "register";
mysql_connect($host,$user,$password) or die ("database tidak terhubung, cek koneksi");
mysql_select_db($database);
?>
file proses.php
<?php
include "koneksi.php";
$password=$_POST['password'];
$username=$_POST['username'];
$email=$_POST['email'];
$fullname=$_POST['fullname'];
$query=mysql_query("insert into daftar(password, username, email, fullname)
value('$password','$username','$email','$fullname')");
if($query){
echo "Data Berhasil ditambah";
?><a href="/bukutamu.php">  Lihat Data Masuk</a><?php
}else{
echo "Gagal input data";
echo mysql_error();
?>
file login.php
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
<title>Senza nome</title>

    <meta http-equiv="X-UA-Compatible" content="IE=Edge">
    <script type="text/javascript" charset="utf-8" src="login_edgePreload.js"></script>
    <style>
        .edgeLoad-EDGE-1488021 { visibility:hidden; }
    </style>

</head>
<form action="proses.php" method="POST">
<body style="margin:0;padding:0;">
<div id="Stage" class="EDGE-1488021">
</div>
</form>
</body>
</html>
after submit
     database---->>> stil blank...

How to make a round border around my picture?

I am trying to design a logo that would fit into the center of a Frisbie, yet I cannot figure out how to make a round border around the picture. I have tried using the eliptical tool, and have also tried using the cookie cutter. The only option I can get to work with the eliptical tool, is the feather, yet I can't change the pixel number for some reason, so it just makes a thin circle around the picture. I thought I could cut and paste it, but the copy and cut options were grayed out and didn't work. When I used the cookie cutter, it made a nice border, and I pasted the picture into it, but, there are four sections that need to be filled in with the background color and the paintbucket didn't work in those spaces (they are the gray and white checked areas. (the picture ends up looking like a rectangle inside of a circle). So I made a new blank file and filled it in with the color of the picture's background, hoping to use the cookie cutter tool around the picture that was now pasted into the new blank file (I chose another color for the round border) and I used the cookie cutter around the picture, but when it was finished, the whole picture ended up being white. All I want to do is to make a border around a picture (a round border). Nothing I have done has worked though. What am I doing wrong, or what are some other options for trying to do this? Thanks.

Here is a simple way to add a border. Select the item, add a blank layer, choose the border size and color and the Outside option:
Here is the result:
Note that you don't even need to do the Stroke on a blank layer. You can Stroke directly on the picture layer. However having the blank layer preserves the picture in case you want to start again with different Stroke options.
If this is not what you are looking to do, please clarify.

Merge to HDR Pro - how to make it work?

The 'Automate -> Merge to HDR' feature worked fine during the first few weeks of my Ps CS5 trial but now doesn't work. Photoshop gets through the Merge to HDR Pro dialog but throws the attached error when returning to Ps.
If Merge to HDR Pro is chosen on DNG images from Lightroom 2.7 or Bridge CS5, Photoshop again gets through the Merge to HDR Pro dialog but when creating the HDR image and returning to Ps seems to throw it away with no resulting error. Photoshop just stares blankly with no image open.
I experienced the same error with CS4 and was excited when the Merge to HDR Pro feature on my CS5 trial worked fine, yet with 5 days left in the trial the HDR feature now refuses to cooperate. It previously was working OK from the Automate menu, from Lr 2.7, and from Bridge. What exactly I did to upset Photohop is a mystery.
I've tried resetting preferences and removing all plugins and extenstions to no avail. Any ideas on how to make Merge to HDR Pro functional?

There has been a long and continuous thread regarding CS5 having problems when one tries to save images that have been combined in Merge to HDR Pro. I have exactly the same problem. I have been shooting 3 images bracketed -1, 0, +1 or -2, 0, +2. When I select 3 images in Bridge. Go to Tools>Ph otoshop>Merge to HDR Pro the computer does its work and produces an image of a combination of the 3. I can see the image, and in the Layers Panel I see 3 Layers plus one Layer that is entitled Merge to HDR Pro(layer is devoid of image. When I try to Save As Photoshop freezes up. I have 11 Screenshots to illustrate. Also Select 3 in BridgeI have tried many different sets of images. Screenshots:Select 3 images in Bridge CS5Go to Tools>Photoshop>Merge to HDR ProSave as 32 bit image; have tried 16 bit and 8 bit too- still freezes at endSave as BEF 32 bitSaving -Computer is Processing32 bit image saved on screenSave as bef to proper locationPutting in File TitleSelecting 1PHOTOSHOP FROZEN- anything I click on no responsePhotoshop Running but not responding- Frozen; Task Manager says all running here, but no responseHave to end process with task manager. Thanks, Sam

Merge to HDR - How to make it work?

Merge to HDR worked once on the CS4 sample files but no more. Photoshop gets through the Merge to HDR dialog on the sample jpegs (or my own jpegs) but throws the following error when creating the HDR image:
Error 54: uncaught JavaScript exception: Error #.
Line: 168
-> throw err;
If Merge to HDR is chosen on DNG images from Lightroom 2.1 or Bridge CS4, Photoshop again gets to the Merge to HDR dialog but when creating the HDR image seems to throw it away with no resulting error. Photoshop just stares blankly with no image open.
And resetting the Photoshop preferences of course has no effect on this abnormal behaviour. Any ideas on how to make Merge to HDR functional?
(Needless to say Merge to HDR works okay on CS2.)

I just tried it as I was curious. It's not working here if I run the script and then browse to the files. If I have the files already open it works.
I'm having the very same issue with the "load files into stack" script. It appears to start but only results in one file, not a stack...nor a 32 bit merge of multiple files in the case of hdr.
In addition I'm having issues opening some 16 bit tiff files that load fine in CS3.
XP Home
2.6 core duo
latest nvidia drivers
4 gigs ram, 60 gig scratch partition

How to make the vendor column have figure in GRIR line item with RE document type?

Dear Experts,
Could you tell me how to make the vendor column have figure in GRIR line item whose document type is RE?
Thanks!
Xinling Zhang

Hi ,
You are using FAGLL03 .
FAGLL03 report vendor code is blank
vendor number in new FAGLL03 tcode (offsetting account information)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b96fed-eb5d-2e10-1792-f3ff9f65df8a?QuickLink=index&…
Also check OSS note
Note 112312 - Line item: Display of offsetting a/c information
Note 1034354 - FAGLL03: Display of offsetting account information
Many Thanks

How to make a sign-in Board

Can I use photoshop elements to create a sign-in board? I want to make a 24x36 page that will be mounted on Foam Core for my daughter's friends to sign using a sharpie. I want to make the background BLUE, add my child's name in TEXT at the top and a photo of my child at the bottom. Since I just created a 24x36 collage, I know how to create the size and add a photo. I don't know how to make the background blue and add text. I've been playing around this morning with no success in trying to change the background layer color. Can I have some guidance?

Felisse,
Open your blank new file
Duplicate background layer. Work on this layer.
Set foreground color chip to blue (lower left}
Go to Edit>fill layer>Use foregound color
Change foreground color to a contrasting color
Access Horizontal Type Tool, in its option bar select size and font
Type your message
Insert picture and place it using move tool.

How to make table of contents linkable

Could someone tell me how to make the table of contents for my indesing book linkable? I've seen this in PDF documents before and assume it can be done using InDesign, but haven't been able to figure out how to do it.

gscortino1 wrote:
I need to have a Book Table of contents work as well as chapter Table of contents and also Ineractive elements all work when clicked in a PDF. How do I manage this? I can get the Table of Contents to work and no interactive elements or visa versa. I f I export to pdf Ptint I get both TOC to work but no buttons If I export to interactive I get only the Chapter TOC to work and the buttons but not the Book TOC. I know its a bug what is Adobe doing about it and when are we going to get a free fix?
What version of ID are you using? What export settings? As noted above, there is a bug, and what you want may not be posible at the moment.

PSE3, how to make white background for silouette

I have taken a few pics of my grandkids in silouette form. That is, profile shots taken against window with snowy background. I've done a conversion to B/W, but need to darken it further. My main question is, how do I put a selection on a pure white background? Barbara, I have your book, but I haven't been able to figure it out yet. Do you have specific pages to look at? I know how to make a decent selection, but that's about it! Thanks.

Donna,
1. Make selection of silhouette
2. Go to Edit>copy
3. Go to File>new>Blank file> Color Mode:RGB. Background contents:White. Size H&W for your paper stock.
4. Go to Edit>paste.
5. Position selection with move tool.
Ken

How to make a blank TOC.

Similar Messages

Maybe you are looking for