How to make a boot disk for new iMac?

I just purchased a new iMac equipped with a bare bones 1TB SATA hard drive. I want to replace that disk with a 1TB SSD from Crucial (less than 1/2 of the cost of purchasing the iMac with the SSD). I have a Time machine backup of the iMac on a Time Machine/Airport device; how do I make a boot disk that can get the OS up and running, and able to restore the backup from the Time Machine?
Thanks,
Tony Darst
Baton Rouge, LA

tdarst wrote:
I had not given the warranty issue any prior thought; thanks for pointing that out. Is there a way around the warranty issue; such as a "factory authorized" way to install it, that is feasible?
Thanks for the quick response...
TD
You can take it an AASP to have the install done however you probably would be better off returning the machine (assuming it was bought directly from Apple and is less than 14 days old) and buy the configuration you want. Even if an AASP does install the SSD there is no guarantee Apple will honor the warranty, it's 100% at their discretion.

Similar Messages

How do I make a boot disk for my new iMac?

How do I make a boot disk for my new iMac?

Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
   2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
     sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
     /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again. Wait for the process to complete which will take quite some time.

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imac

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 " or connect via thunderbolt to another imac
ann

You will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
Boot Using Command+R keys:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears.

How do I make a boot drive for my imac?

What do I need to make a boot drive for my iMac in case the internal drive fails? About how much memory is required (I'm running Snow Leopard.) Or, can I run it off the disk that came with my machine?

Yes, you can do that - I prefer having an up to date bootable clone of my entire system for emergencies. It's easy to do that: download either CarbonCopyCloner or SuperDuper (I use both), hook up an external hard drive (preferrably Firewire because it is much faster), format it to Mac OS Extended (Journaled) and GUID partition scheme (under Options) - both done in Disk Utility (Applications > Utilities) and then you simply launch either one of the two apps mentioned and let them do their thing (170 GB take about an hour).
You will wind up with a complete carbon copy/bootable clone of your system.

How I make a boot disk

Hello.
I'm an absolut Linux beginner and I tried to install archlinux on an external HDD, because my internal windows drives are dynamic logical Volumes and this doesn't work with Linux.
After the installation from the CD I noticed that I cannopt boot from USB HDD because of the BIOS.
How I make a boot disk (floppy) now ? The wiki guide doesn't help because if I boot from the installation CD I don't have the command fdformat and the command pacman - S grub works neither.
Can you help?
Best Regards
BX-8017
Excuse by bad language please, I'm not english!

Ok,
I found a grub boot disk on the net, it was a super grub boot disk. I deleted nearly all files and just copied my files from /boot/grub in the grub directory of the floppy disk. I used the windows tool "explore2fs" to get acces to my boot partition with the grub directory.
Her is my menu.lst:
# (0) Arch Linux
title Arch Linux
root (hd2,0)
kernel /vmlinuz26 root=/dev/sdc1 ro vga=773
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd2,0)
kernel /vmlinuz26 root=/dev/sdc1 ro vga=773
initrd /kernel26-fallback.img
# (1) Windows
title Windows XP
rootnoverify (hd0,0)
makeactive
chainloader +1
It doesn't work, because the hd 2,0 is not found from grub. (Selected disk does not exist)
It seams that grub is not recognizing my usb hdd at start up ?!?! but this cannot be, because during the installation process it is.
Many Thanks
BX-8017
PS The possibility to boot Arch with the Windows Bootmanager is interesting. Maybe we can discuss this later.....
Last edited by BX-8017 (2007-07-18 15:36:57)

How much RAM should I install for new iMAC ?

Hi,
How much RAM should I install for new iMAC* running Logic Studio? It comes with 4 GB - is that enough? (can you run in 64 bit mode..)
*(The 21.5" 3.06GHz Intel Core 2 Duo)
Also, I was planning to get the stock 1 TB Hard Drive & save projects to an external drive.
Does that sound reasonable?
Any other recommendations?
Thanks,
Wm Heart

Unless you plan on running huge projects with enormous sampled instruments, 4 GB will do (very) fine. And your disk plan is sound. Choose an external Firewire drive, rather than USB. FW is easier on the CPU and can handle more tracks than USB.
What you should get, instead of more memory, is a (24 bit) external audio interface, if you want to do serious recording and playback.
What type of audio interface you'ld need, depends on what you want to do with it and of course your budget. From decent to brilliant costs from roughly 100 to several 1,000's of europounddollars. Avoid the 16 bit ones, they're worse than the inbuilt audio chip of your iMac. You can recognize 16 bit Audio Interfaces (in webshops) by their prize (often under 100€£$) and the lack of mention of their bitrate.
HTH
Regards, Erik.

Cq56-219wm boot disk for new hard drive

I replaced my hard drive in my cq56-219wm laptop. the screen says, "No bootable device --insert boot disk and press any key. I dont have a disk. How can I download the proper disc and try that?

Bill.
Recovery Kit here.
https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?softwareitem=640123-001&cc=us&dlc=en&lc=en&os=4063&pr...
Or here.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

"No Boot Disk" on new iMac with external optical drive

So I am experiencing a problem similar to what some people have had, but I have the brand new iMac which does not come with a cd drive.
I have a fusion drive in the iMac.
I downloaded Windows 7 Ultimate from my University software store, which gave me a .img file. I burned this file to disk in order to make the boot drive.
I am using an amazon basics DVD optical drive which connects to my computer via USB.
Upon boot into windows, it does not recognize the dvd in the drive as bootable, and says "No Bootable Disk Found, Press Any Key". Of course, I have a bluetooth keyboard and cannot press any key because there are currently no drivers.
So, any ideas on why it won't recognize my boot dvd?

It was just a simple case of removing the verbose boot settings which I found a script for after searching on Google.

How to get make a boot disk for lion

Hi,
I have a fatal disk error that required a full rebuild (so says disk utility) but how to obtain as there was no option to create at upgrade time and I can not see any other method. SO how do you do it?

Macs with pre-installed OS X Lion don't come with physical media. You have a recovery partition on your internal hard disk on your mac. If you want to reinstall OS X, hold down CMD + R when you hear the startup sound.
If you want to, you can buy an OS X Lion USB Thumb drive here: http://store.apple.com/us/product/MD256Z/A ($69.00)
You can also copy the recovery hd on an USB drive with this tool: http://support.apple.com/kb/DL1433

How to make OSX boot disk using a USB thumb drive? The final answer?

Well guys I am getting really conflicting information about possibility to use USB thumb drive for boot up drive for OSX! Some people say yes, some say no, some - not sure.
Here is the question formulated as straight as possible:
A Mac user wants to create OSX 10.6 boot-up disk on a USB thumb drive, so it can be used to start the Mac instead of using manufacturer’s CD. Also, (thumb drive’s size permitting) the Mac user must be able to install software on it, as it is done on the internal HD.
The computer is MacBookPro , Intel based , OSX 10.6
The USB thumb drive is 16 Gb brand new .
So,
what the EXACT steps will be, to properly Mac format the thumb drive with OSX disk utility and then install on it the OSX 10.6 from the manufacturer's grey CD that comes with the Mac?
Could someone, who has practical experience and is absolutely sure about the exact steps provide the final answer, please?
Thanks in advance to old hands & pro Mac Users willing to clarify this topic !

Hi
The instructions to make a bootable USB are [here|http://macs.about.com/od/diyguidesprojects/ss/usbflash.htm]
I have made a bootable USB following the above instruction and also had enough space to install a few utilities. It works fine for me.
I usually like to check disk health of my MBpro intel via disk utilities off the USB after booting from it. Not that this is a recommended way or anything, just that I like to do it that way.

How to create RT boot disk for labview real time target

Hi All
I want to use desktop PC as real time target and for this i have to boot this desktop using RT operating system. I tried to use RT disk utilities in TOOLS menu in MAX but at the end it says no disk found in A drive or B drive since i do not have flopy drive in my laptop. I can not make a PC utility USB drive also since this option is not highlighted in the options hence i can not select it. Is there a way to create this RT operating system on a CD drive or can i download this operating system from somewhere so that i can boot desktop PC as real time target. Thak you for your help.
Chauhan

Hello,
Well... you have a problem. : )
The easy solution that i can remember it's.... Buy a usb floppy disk.
Sorry, but it's the only think that i can remember.
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

How can I get a boot-disk for a Compaq P2500 laptop Windows XP Home Edition?

I'm already in another forum with a eerily similar question, but that's for the HP Media Center Pavilion m8000e desktop system (Windows Vista Home Premium) I was just given; I've ordered a new hard drive for that. I assume the directions to create a boot disk with the *.iso file (using Imgburn) is going to work; I have the 25-digit code for that.
This question here now is for my wife's older Compaq P2500 2596US laptop running Windows XP Home Edition. This too needs a new hard drive, but I also am missing the boot disc for this; I do have the 25-digit product code.
How can I get a boot disk for this laptop? I tried the Ubuntu method outlined in a few posts; geez, what a headache ... never could get it managed. Does HP not make any boot disks available? Microsoft told me to check with HP.
I can furnish the product code; model #; serial# ... gee, maybe the oroginal receipt is even laying around somewhere ...
I need a boot disk to get the new hard drive up on board (if I end up ordering that).
Thanks for any help!
Michael

Hi
Please find the link given below might be helpful for your.
http://www.computersurgeons.com/productdetails.aspx?ID=4219
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

How do I make a recovery disk for my Mac running 10.5.8?

How do I make a recovery disk for my Mac running 10.5.8?

Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

How do I make a boot disk?

How do I make a boot disk in OSX 10.4 something and have some tools like Disk Warrior on it? I found one program at versiontracker that does this but it doesn't work in .4, oh well ...... or I can just wait for several days til my DiskWarrior CD comes in the mail ....... but who can be without their computer that long in today's day and age? yup, you guessed it, my powerbook won't start up and I've tried lots so far ...... hoping dw will do the trick.

http://www.macosg.com/group/viewtopic.php?t=13956
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 
Disclaimer required by Apple Discussions Terms of Use: MacOSG - a non-profit Apple User Group - may receive some form of compensation, financial or otherwise, from my recommendation or link.

How to make a boot disk for new iMac?

Similar Messages

Maybe you are looking for