How to make a boot hard drive clone

I would like to make a clone of my 09 Mac Pro Quad 2.93, Snow Leopard boot hard drive. The idea is to install and boot from the clone in the event of a boot drive failure. Can this be done?

You can put the clone on any drive that you find suitable. If you use an internal drive it may be convenient to use backup software to update your clone so it remains a duplicate of your startup drive. This has the added benefit of acting as a backup. Suitable backup software might be:
Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

Similar Messages

How do I make a bootable hard drive clone of my main disk in my mac pro?

Hi everyone,
How do I make a bootable hard drive clone of my main disk in my mac pro?
My main drive has bad sectors and I want to replace it.
Thanks in advance

Also your Mac's Disk Utility can make a bootable clone;
http://macs.about.com/od/backupsarchives/ss/diskbackup.htm
Consider though, if your internal HD is failing and defective, then any clone however made, may carry that defect.
Perhaps it would be better to copy your personal data, photos emails etc, to an external drive as well, just in case the clone did not work because of the failing hard drive.

How to make a bootable hard drive

I will be purchasing an external hard drive for my G5 for extra storage. Is it possible to make the second hard drive bootable without actually installing OS X on it? Is there a way to just install a system folder? Or can I just copy the OS X installer to that drive?
I just want to be able to boot so I can run Disk Utility on the main drive when needed without having to use the startup DVD.

Hello! You can also follow Kappy's suggestion below. Tom
Kappy's step by step guide to ext cloning.
This requires two steps and the external drive must be a Firewire drive:
Prep external FW drive:
1. Open Disk Utility from your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the startup or source volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup or source volume to the Source entry field.
5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
7. Double-check you got it right, then click on the Restore button.

How to make space on Hard Drive for videos?

I recently tried to download the first season on "Lost" on my 60GB video iPod, but I ran into problems when trying to download these b/c of the space needed on my hard drive. Besides the obvious answer, "erase other files on your computer," is there anything else I can do to fix this?
Thanks!
PowerBook G4 Mac OS X (10.4)

Well, if you are running out of space on your hard drive, the only thing you can do to free up space is to erase something from your hard drive. So, no, there's nothing else you can do to fix this.
Find some stuff you don't need anymore, and either delete it for good or burn it to CD first. If you don't want to delete anything, invest in an external firewire hard drive (they're very cheap, and allow you to do a full backup of your system in addition to having extra storage space... You are backing up your computer, aren't you?).

Disk utility will not boot using COMMAND R. It won't give me the 'ERASE' option when I open Disk Utility. How do I wipe my hard drive?

Disk utility will not boot using COMMAND R. It won't give me the 'ERASE' option when I open Disk Utility. How do I wipe my hard drive?

If you're truly running 10.6.8, there is no Recovery partition - that didn't come along until 10.7x.
You'll need to use the set of gray discs that originally shipped with your model. If you don't have them, you can always get your serial number from the bottom of the casing and call Apple to get a set of replacement discs. These will run you about $20 + shipping & taxes. Once you have the discs, boot from Disk One and use Disk Utility to erase your HD and then reinstall whichever version of OS X that shipped with your model. No way around of getting the discs.
Clinton

How much noise should the hard drive make on a MBP early 2011?

Had since May/June last year i5 13" and only since I applied all updates few weeks ago it seems to be louder than it was before?
It sounds like a fan but isn't... obviously. Right hand side of track pad, and covering it, in fact just touching it dampens it to barely audible. Is that normal or has something gone a bit weird? A constant fan noise, which isn't the fan is now there permanently.

How much noise should the hard drive make on a MBP early 2011?
None.
The machine should only make noise if the Superdrive is being used or the CPU's heavily used, going by my Early 2011 17".
It sounds like a fan but isn't... obviously. Right hand side of track pad, and covering it, in fact just touching it dampens it to barely audible. Is that normal or has something gone a bit weird? A constant fan noise, which isn't the fan is now there permanently.
It's possible it wasn't installed correctly and/or the case is slightly off so it's resonating the hard drive vibrations.
Make sure you have a internet connection (don't move) and reboot the machine holding the d key down like forever and Hardware Test will run.
Backup your data off the machine, if the hard drive dies under 1 year or three years with Applecare, then go get a new one. else you can replace it yourself with a better one and not void your warranty if you don't break anything doing so. Add more RAM while your at it.
http://eshop.macsales.com/installvideos/
As you know Mac's are made by hand by young Chinese women working 12 hour shifts performing the same function every 7 seconds for only $1.20 a hour. They live 7 to a box room and have to pay 70¢ a meal.
All in all I would say they are very tired, and it's possilbe a few defects made it to your machine.

How do i repair my hard drive in single user mode when disk is full?

Hi there Apple Community!
I have an old Macbook Pro 17" with an upgraded 500GB harddrive and 4GB memory. I'm running Mac OSX Lion.
Was hoping you could help me out. THis is the situation:
Long story short I spilt wine on my macbook and the screen went a bit blobby. Switched it off for a few days, removed the battery etc. etc. Opened it up cleaned out as much of the wine as possible, but unfortunately some of it came in behind the LCD, so now the screen has a nice red stain. Obviously I'm not going to try to clean that out of the LCD.
My Macbook Pro still worked for a few days after that, but then my harddrive gave up. I booted in the Recovery HD menu, verified the drive and I got the error "Keys out of order - This disk needs to be repaired, click Repair Disk." I attempted to repair the disk but got the error "Keys out of order - Disk Full Error - The volume could not be repaired".
Unfortnately of this 500GB I only have about 7GB free on it, as I have a huge iPhoto and iTunes library. I did make a TIme Machine backup of my user directory, but not the system files. I don't really want to do a clean install because:
1) I'm paranoid that there's something I did not fully back up
2) I don't want to have to download the whole Mac OSX Lion again. I should have made a USB bootable backup when I had the chance. I don't have access to a broadband connection.
What I feel are my viable options, are as follows:
1) I did buy a replacement internal 500GB harddrive, so I can probably try to make an image of the hard drive to this new drive, but not sure how. I believe it's through the Disk Utility with the "New Image" option but not sure how to go from there.
2) Start up in Single User Mode and delete some unnecessary files and re-attempt to run the fschk -fy utility again (I tried this earlier and got the same Disk Full Error). - the problem with this is, I'm not familiar with the command line and have no clue how to delete files. I don't know my way around Unix.
3) I can also probably attempt to make a Ghost Image or Acronis Image of the failed drive to this new drive, but not sure if Norton Ghost or Acronis True Image will be able to read this HFS drive - I believe it's possible as it's a simple hard drive clone.
If you can guide me in the best option - probably there is a better solution than my proposed ones above, I appreciate any feedback and comments you might have!

hi Baltwo,
So I ended up copying my user folder to another harddrive. I managed to download the whole osx lion again, reinstalled, and recovered my home folder using this discussion:
http://support.apple.com/kb/HT1428
I have managed to get all my files back. My iTunes library works fine, but my iPhoto library when I open it, get the following error:
iPhoto cannot be opened because of a problem.
Here's the error log
Process:         iPhoto [1540]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         8.1.2 (8.1.2)
Build Info:      iPhotoProject-4240000~8
Code Type:       X86 (Native)
Parent Process: launchd [209]
Date/Time:       2012-09-19 19:56:45.528 +0200
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 9
Sleep/Wake UUID: 7948ABE2-5294-4F87-B6E3-777095A2F2EE
Interval Since Last Report:          4780 sec
Crashes Since Last Report:           9
Per-App Crashes Since Last Report:   9
Anonymous UUID:                      70117D38-03EA-4F9C-B810-50B743864B9E
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
I've done an Apple Software Update but it didn't find an update for iPhoto.
One thing to note is, this library was originally created on iLife 08, upgraded to '09 and it stayed on that version. It hasn't een upgraded to iLife '11. It worked fine on my previous install of OSX Lion. How do I recover the library without upgrading to '11 ?

HT1635 How do I know which Hard Drive to get for my MacBook 2006? The old Hard Drive is a Toshiba (MK8034GSX) S/N Z6APT2XUT 9H5 EC. A?

How do I know which Hard Drive to get for my MacBook 2006? The old Hard Drive is a Toshiba (MK8034GSX) S/N Z6APT2XUT 9H5 EC. A?

I've put a 250gb 7200rpm drive in an Early 2006 with no problems.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/HDE-SATA-Hard-Drive-Enclosure/dp/B001AAVA08/ref=pd_bxgy_pc _text_b
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

How do i know which hard drive to buy to replace my macbook 13"

how do i know which hard drive to buy to replace my macbook 13"

Any 2.5" form factor SATA drive will work.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody
http://eshop.macsales.com/installvideos/macbook_13_unibody/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the free application SuperDuper. It makes a bootable copy of everything on your hard drive http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

How do I update my hard drive?

How do I update the hard drive in my MacBook? I have a 250Gb and want to go to a 500Gb and want to just move my data to the new drive and swap. Is that possible?

For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody
http://eshop.macsales.com/installvideos/macbook_13_unibody/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

How do i repair a hard drive?

I bought my ipod at best buy and paid with cash i put the receit in my wallet but i got stolen at the movie theatre the point is that i don't have a recit anymore and don't know how to replace my ipod now. it apears the apple icon with the back lights off then the icon with a ipod sad face apears telling me to go to apple.com/support.ipod and the back light turns on then everything goes off you can hear it that the driver it's working hard to start but it does not turn it on at all i went to the web site that they show i spent more then 2 days reading and doing what they say but nothing works at all. i just wants to know how do i get my ipod back to normal. i went to best buy they told me i have to came here again but since i already did all of this i could not do it again right.they said it needs a new hard drive what do i have to do to get a new one? how much do i have to pay?. i don't know how to get a new hard drive because i don't have the receip.
Ipod 80GB Windows XP

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

I am looking to back up my MAC, and I need to know how big of an external hard drive I need

I am looking to back up my MAC, and I need to know how big of an external hard drive I need. How do I determine this?

Well, they recommend at least 2 - 3 times the size of your hard drive if you are using Time Machine because that keeps making backups until it runs out of space (and then deletes the oldest to make room for the newest).
However, if you prefer to have a bootable clone as a backup, you need about the same size as your hard drive since it is a perfect copy of your system (unless you want to partition and keep an older clone separately).
So, check to see how large your hard drive is and go from there.

With Lion, How Can I Erase the Hard Drive and Reinstall The System Software?

I plan on buying a used iMac with a Core 2 Duo so that I can run Lion. Since Lion can only be purchased at the Mac App store what if I needed to erase my hard drive and re-install the system software. How can I do this without a DVD with the OS on it like I have for Snow Leapard. I suppose that I could boot from my Snow Leapard DVD and do the erase. Then, I supposed I would be able to download Lion again from the Mac App Store without paying for it again. But, how would you erase a hard drive and reinstall the system software when purchasing a new Mac with Lion already installed and no DVD at all with the OS on it?
-- Kaydell

When someone purchases any Apple computer with a DVD Drive, they should have recieved two DVDs... One contains the Operating System (up to Snow Leopard, Lion no longer ships on DVD) and the other contains the SYSTEM SOFTWARE (i.e. iLife and iWork). To install the software, they just insert the DVD with the SYSTEM SOFTWARE into any compatible Mac and run the installer. There is no need to erase the hard drive to install SYSTEM SOFTWARE. Maybe a friend can let you borrow the SYSTEM SOFTWARE DVD. The other option is to purchase the software via the App Store.
FYI... App Store purchases are linked to the PURCHASER'S APPLE ID. So if you buy a used Mac from a friend and that Mac already has Lion installed on it,that Lion purchase is linked to YOUR FRIEND'S APPLE ID, not yours. So if you want to download Lion again, you will have to enter your FRIEND'S APPLE ID AND PASSWORD. You can always have your friend re-download Lion and make you a DVD copy.

How to get Mac OS hard drive to appear on desktop

I have a MacBook Pro running Snow Leopard with a partition to run a Windows OS through Boot Camp. After a repair for physical damage to the screen, the hard drive partition for the Mac partition of the OS drive does not show up on the desktop. How would I get the hard drive icon to appear on the desktop

Boot from OS X on another drive (external if you have made a clone) or your OS X DVD - and repair the Mac HFS partition. Or see if you can access it. If Disk Utility won't, and even if it does, I'd invest in Disk Warrior.
http://www.macintouch.com/readerreports/harddrives/topic4557.html#d10aug2010

How do I free up hard drive space and turn off file vault?

How do I free up hard drive space on my Macbook so I can

You guess is wrong, Time Machine can back up with FileVault turned on.
You are seriously short on free space. You need to delete or move enough files to increase your free space by at least 10 GB. Your movie, video and music files would make good candidates for gaining the most free spoace quickly.
Once you get the free space you should repair the disk by booting from the Install DVD and starting Disk Utility. I am not talking about repair permissions here either.
The reason to repair your disk is that running the free space so low has greatly increased the chances for disk corruption. If you don't do the corruption will only get worst cause weird problems for you until the system stops.
Allan

How to make a boot hard drive clone

Similar Messages

Maybe you are looking for