How to make a combined zoom and fade in/fade out effect in Premiere Pro CS4

Hi everyone,
Like the title says, I would really love to have an effect I could just drag from the effects menu onto my footage (mostly text titles) so they could fade in for a second, zoom in slightly while they're on screen, and then fade out for the clip's last second.
That would make my workflow a LOT faster than fiddling with keyframes for the zoom and always grabbing the cross dissolve at the start and end of the text for a few projects I have.  It doesn't sound like much, but when you have moving fading text a couple dozen times in each project and it takes the bulk of your time on the project, the repetition reminds me there has to be a better way.
That's what a computer is supposed to do, right, take care of simple repetitive tasks?  So how can I get this set up as a reusable effect?
Thanks!

Dave,
I will +1 Pixelan's products. They are great, simple, and have about the best support that I know of. When you explore, say Pixelan's SpiceMaster, dig deeply. Things appear rather mundane, on the surface, but there is so very much power lurking, just below the surface. I could almost imagine a 1000 page manual to cover every possible aspect of that program... Every time that I use it, I learn something new, and wonderful.
Good luck,
Hunt

Similar Messages

  • How come I need to render EVERY TIME I apply an effect in Premiere Pro CC?

    I am using Premiere Pro CC version 7.2.2 (33) on a 2.9 GHz Intel Core i5 iMac with 24GB of memory and an NVIDIA GeForce GTX 660M 512 MB graphics card. The footage I am importing is ProRes 422 1920x1080 square pixel 24 frames progressive footage.
    When I place clips onto the timeline, they play without any issue. In fact, they play beautifully! However, whenever I apply an effect, the clips needs to be rendered. Here's the biggest problem though, every effect needs to be rendered and I don't even need to change the settings of the effect. Just placing the effect on the clip causes a red line to appear above my clip.
    Help!?

    Kevin,
    They do play back. They don't become labored or jerky until I begin taxing the GPU with stacked or complex effects. John T Smith was right on about the hardware deficiency and your insight into my FCP past and red render lines completed the answer for me.
    It looks like I'm now in the market for a hardware upgrade.
    Thank you, both.
    Ephraim

  • How to convert 32 fps footage to 24 fps for slowmotion effect in premiere pro cs3?

    Hi there,
    Can somebody give me any advice on this?
    Is there something specific i need to adjust in the preset? or can i just richt-click on the footage in the timeline and convert it to 24fps?
    Is it best to always shoot at a higher frame rate then 24fps..lets say for this particular clip and subject 32fps?
    i'm doing this for a videoclip and we thought that such an effect would be nice during the choris of the song.
    I hope somebody can give me some advice on this. Thanks in advance for the effort. much appreciated.
    grts. Tristan

    @Dan Isaacs
    tnx for your reply: reason why shooting at 32fps is because the audio on the set has been speeded up with 133%. I thought it's best to stay in the same ratio in order to have the lips sync on the audio (this is in realtime)cuz when slowing down the footage to realtime speed the lips must be sync with the audio which is also in realtime speed
    If I make sure that when slowingdown the footage in the project,it matches the realtime speed of the audio...,
    does it matter at which frame rate I shoot?
    @Craig Howard
    Well..I just got word of the rental company and there is a big chance that they have the panasonic HVX200 ready for me when i need it, SO i think that will be the one
    So it will be as follow: shooting on a hvx200 at 32fps or if it doesnt really matter at 60fps for a better slowmo effect
    of course i will shoot on High Def ;) and will need the p2 cards, after shooting I will capture/import the footage from the cards as you guys adviced me to do...
    my main issue was thinkin I needed extra software for downconverting the framerate in order to get the slowmo effect, e.g.: cineform aspecthd
    I think that i'm full circle now..or am i missing something?
    hehe..tnx again guys!

  • How to sell Premiere Pro CS4?

    I just switched to the Mac and want to sell my copy of Premiere Pro CS4 for Windows.   Is there a process for that?

    If that copy is a stand-alone, and was not used as part of any upgrade, then Adobe makes it easy to Transfer the License. It should only take a FAX, or two, and they will provide you with everything that you need. Contact Adobe Customer Service, and inquire on the steps to Transfer the License. When you go to sell the software, include the info that you have have all of the paperwork, as that will go a very long way to asuaging any fears of bogus software in the mind of the buyer.
    Good luck,
    Hunt

  • How can I make a fade out effect at the end of the song in garageband for iPad?

    I want to made this effect but honestly I have no idea about what I have to do. u.u Please help.

    ClaudioWalrus wrote:
    How can I make a fade out effect at the end of the song in garageband for iPad?
    GB for iPad doesn't have volume automation, you'd need to import the project into GB on a Mac to create the fade with a volume curve.
    as an alt, finish your song and export the audio file, then import the audio file in an audio editor and create a volume fade with that:
    http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How to fade in and fade out audio in the new version of Imovie?

    Please help me!
    how to fade in and fade out audio in the new version of Imovie?

    There is a tiny dot at the beginning and ending of an audio clip that can be moved to adjust fade in and fade out.

  • How to make an checkbox editable and uneditable within a single alv output.

    Hi,
    How to make an checkbox editable and uneditable within a single alv output depending on condition.
    I have used Reuse_alv_grid_display.
    In my output every checkbox is editable. i have used edit = 'X'.
    I want editable checkbox for correct value and uneditable checkbox for incorrect value in a single alv

    >
    Mukilansap wrote:
    > I want editable checkbox for correct value and uneditable checkbox for incorrect value in a single alv
    Use alv styles to achieve this, set the style for each record before displaying the ALV. Structure LVC_S_STYL.
    Take a look at the example BCALV_EDIT_02, it is OOPS based, but check how the style table is filled.
    regards,
    Advait

  • How to make google come up and not yahoo when i click anew tab

    how to make google come up and not yahoo when i click a new tab
    == This happened ==
    Every time Firefox opened
    == today

    You can use 1 of these add-ons
    [https://addons.mozilla.org/en-us/firefox/addon/newtaburl/?src=search
    NewTabURL ]
    [https://addons.mozilla.org/en-us/firefox/addon/new-tab-homepage/?src=search New Tab Homepage]
    with NewTabUrl you have more options
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

    Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

    Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
    I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
    Sorry, I can't be of more help.

  • When you change PC how to make connection with iphone and new PC

    when you change PC how to make connection with iphone and new PC

    Yes, you can do it the same as any other database. The code would be similar.
    I'd also suggest you not to use the JDBC ODBC bridge for connection. There are other drivers available for that.
    Regards
    xH4x0r

  • How to make custom binary module and add to powershell?

    How to make custom binary module and add to powershell?
    I wish to add 'Microsoft.SharePoint.Client.dll' in powershell as binary module so I can use its intellisense.

    Hi Biraj,
    I replied to this in other thread
    https://social.technet.microsoft.com/Forums/en-US/a13c9cc8-7d53-46b5-b5bb-65404db2d347/how-to-make-intellisense-enable-in-powershell-in-csom-for-sharepoint-online?forum=sharepointdevelopment
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • How to make Scroll viewer zoom disable

    how to make Scroll viewer zoom disable in windows store app

    Hi Imtiyazk,
    Thanks for sharing the solution, should help others have the same issue.
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Very Urgent (How can i add fade in and fade out Action)

    Hi, How can i add fade in and fade out action on the JButton when the mouse is over the button.its mean that when the mouse is over the button then the button's Label is fade in and out.
    plz give code example
    thanks

    If you want to fade in and out anything, you should look at the Composite interface. A Composite is part of a Graphics2D object. You should be able to gradually change this on the button, but maybe within a different thread?

  • Zoom and fade problem

    I have a circle that I want to create a "puls" effect with.
    The circle zooms up and fades away, but before it has fade away
    complete I need a second circle to start zoom and fade away from
    the same place, creating a puls. ( Think of a radiotower sending
    out signals). Do I need two circle mc:s or can I work with one?
    Allso when I use this code to zoom up the circle, when the function
    is complete, the mc stops on full alpha. I want it to loop.

    Create a Circle MC and Give
    "lingage Id" to that.
    Now using
    attachMovie create the + symbol
    now create a function, say
    animateCircle and get a MovieClip Name as Argument.
    now paste your transition effect and instead of
    circle give the argument value
    use
    setInterval to call the function with certain interval
    to control this use the NumbeofClips, and mcCounter
    variables.
    i hope this explanation is more than enough to create that
    effect.

  • I am using Xcode 5 to make a calculator app and I cannot figure out how to do two things.

    So I am using Xcode 5 to make a calculator app and I cannot figure out how to two do two things. First, how to incorporate the decimal and two, how to make the positive to negative button. The app is only for the iPad. I would like to know how to do it asap. Here is the code I used for addition if that helps.
    -(IBAction)Addition:(id)sender;{
        if (RunningTotal == 0){
            RunningTotal = SelectNumber;
        else{
            switch (Method) {
                case 1:
                    RunningTotal = RunningTotal * SelectNumber;
                    break;
                case 2:
                    RunningTotal = RunningTotal / SelectNumber;
                    break;
                case 3:
                    RunningTotal = RunningTotal - SelectNumber;
                    break;
                case 4:
                    RunningTotal = RunningTotal + SelectNumber;
                    break;
                default:
                    break;
        Method= 4;
        SelectNumber= 0;

    sorry i just saw the search feature and found a few of the same questions. I will check those

Maybe you are looking for