How to make a comp from selection using clip names

I have a lot of footage imported into AE7 and I am looking for a way to make an individual comp for each clip using the clip's name as the comp name. When I use the "Comp from Selection. . ." menu item, AE creates a comp name with the next sequential number available.
For example, if my clips have names like "Subclip 1, Subclip 2, Subclip 3. When I use the make comp for selection option, AE will make a comp from each clip, but it will name the comps Subclip 4, Subclip 5, Subclip 6, starting from the last sequential number from the clip names.
Is there a way to do this without scripting? Or and easy way to do it with scripting?
Thanks

Thanks, TimeRemapper this function still works in AE7, but it generates the same result as selecting all the clips and selecting File>New Comp From Selection. . .
I tried a set of files with unique names instead of a series of clips with the same clip name followed by a number. The list of unique named files generated a Comp with the number 2 after each comp name for every new comp created.

Similar Messages

How to make a call from calendar using a number in my calendar?

One of the few frustrating things about the iphone is how I cannot seem to find a way to dial a conference call number that is in my calendar nor dial the passcodes required for most business conference calls. In my case, I am synchronizing with Outlook Exchange. Unlike a number that appears in email being automatically "clickable," the lengthy and hard to remember 1-888 numbers and the pass codes show up as just text. Is there a workaround or an app to help with dialing into conference bridges? Otherwise, even with the power of an iPhone 4, I am still writing pass codes and numbers on napkins in the car. Thanks for any tips!!

I also do a lot of conference calls and was so frustrated by this that I wrote an app to solve this exact issue. It queries the calendar and does pattern matching against the text in the calendar item, including the location field, and presents them so you can dial them directly. Apparently this is not an uncommon complaint. It has been selling pretty well. Check it out at: http://itapless.com/products

How to make a DVD from MPEG-2 clips without re-encoding?

I have many standard DVDs (in MPEG-2 unfortunately) with unedited video footage. I want to extract the best parts of those DVDs and compile them to a new DVD without re-encoding (no fancy scene transitions needed).
I have a program called Cinematize 2, that lets me rip the parts I want as "Main Video Stream" (QT), Elementary streams or MPEG2- Program streams. I can save audio and video as one or two separate files. Which ones works best with DVDSP? I would prefer to save as MPEG-2 Program Stream (one file), as these files can also be played back on the computer with the VLC player.
If I have many different MPEG-2 clips, if I make a DVD with DVDSP, can those clips be played back to back like a movie?
I would appreciate any advice on how to to this the best way I want to have as many options open to me as possible in the future. In particular, in which state or format I should save the files from the DVDs, so that I am both able to watch them individually with VLC as well as edit them together in FCP or DVDSP.
Thanks,
Don

Don
You do need to use separate video and audio files, and Streamclip can do it right (I never used Cinematize!).
And can it work with AC3 as well as WAV and AIFF
You can use AIFF (uncompressed) audio and/or Dolby AC3. If you can try using AC3 audio in your DVD-R projects because first, it takes less space that AIFF (using AC3 you can fit 120 min of high quality video in a 4.7 disc) and second, because it has a lower bitrate. Using AIFF is a very common cause of formatting errors and playback problems, because highbitrate errors.
I have yet not used DVDSP, so I'm not familiar with the process.
You can visit [Drew13's site|http://www.dvdstepbystep.com> for some good tutorials.
Hope that helps !
Alberto

Tolerance dialogue missing on "make work path from selection"

I am trying to convert a 1-color drawing to a path so I can put it into Illustrator. I use the magic wand to select the edges and get a nice tight fit. But when I select the "Make work path from selection" button, I get a sloppy fit. I've looked this up, and supposedly I should get a dialogue box asking me to state the tolerance. I have never seen that box - I've tried it and had colleagues come try it. My version 13.1.2 x64. Seems like a bug to me, but maybe I'm missing something. Is there another way to do this? Thank.s

R_Kelly wrote:
If you press the Alt/Option key while pressing the Make work path from selection button, then you'll get the Tolerance dialog.
Other ways are to right click inside the selection and choose Make Work Path or use the flyout menu from the Paths panel and choose Make Work Path.
Hah! I didn't know that RK
[EDIT] As an aside to the above information, having had a play with it, I have realised how poorly the 'Make work path from selection' feature works in Photoshop. It has always worried me that distibution of points that result from using that feature on a Shift drag eliptical marquee circle, appear less than optimal, but I have just lived with that because it is quick and convenient. But having just looked again, zooming right in and activating the point handles, the curve is just plain horrible!
Me thinks I shall take the time to do it properly in future, by using the Shape tool.
It also amazed me how many points were used when setting tolerance to the minimum of .5
Anyway... I am not getting my work done here, so time to earn a living

How to make bootable iso from download

how to make bootable iso from download

This one - https://www.microsoft.com/en-us/download/details.aspx?id=5587
1st: This is NOT a .ISO file!!
2nd. It is a .MSI file which is a Microsoft Installer file.
3rd: Read the instructions:
Install Instructions:
Click the Download button to start the download.
Do one of the following:
To start the installation immediately, click Run.
To save the download to your computer for installation at a later time, click
Save.
To cancel the installation, click Cancel.
When installation completes a file called readme.txt will open to provide instructions for burning a home computer restore CD. The file is also located
next to the ISO image file for later reference.
4th: If you are unable to read and follow instructions, there is nothing anyone in these forums can do to assist you. You must be capable of reading and following instructions!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
OK, well sorry to disagree with you but:-
1. Using windows 7, the download does not provide a save but only a run option.
2. In the MS predownload instructions you copied it refers to the readme text next to "the ISO image"
3. This is a copy of the read me file attached:-
"This ReadMe document is one of the Windows Home Server Home Computer Restore CD files. Unless you changed the installation location during setup, the Home Computer Restore CD files and license terms are located in one of the following folders:
* On Windows Vista: %HOMEPATH%\Documents\Windows Home Server Home Computer Restore CD (Dual Boot)
* On Windows XP: %HOMEPATH%\My Documents\Windows Home Server Home Computer Restore CD (Dual Boot)
To use the Home Computer Restore CD software, you must write the ISO image file (restorecd_dual.iso) to a blank CD. A CD/DVD burner is required to write
the ISO image file to the CD. Usually a CD/DVD burner includes the software that you need to write ISO image files. Follow the instructions with your burner software, and then select the option to write an ISO image, not the option to write
individual files. Note that you cannot write the ISO image by using Windows Explorer to copy the file to the CD-ROM drive.
Burning the ISO image creates a bootable CD. To restore your home computer, boot the computer from the CD and follow the instructions.
Microsoft may update the Windows Home Server Home Computer Restore CD software. You can download the latest version from the Microsoft Web site at http://go.microsoft.com/fwlink/?LinkID=109282.
If you want to review the license terms for the Windows Home Server Home Computer Restore CD, the file EULA_DUAL.TXT can be found in the same folder"
As you will see it refers to the downloaded .iso file. Nowhere is there a reference to a msi. As there was only a run function on the downloaded file, it could not be saved. How is an ordinary Windows user meant to interpret the instructs
if the download function does not work? What you do is try and follow the instructions and produce a load of frigging coffee mats, as it seems did many of the posters on this thread. Are we all illiterate?
If Microsoft could think in the way of a user it would help a lot of people.
So Rick Dee, please inform me how I misread the instructions?

How to make first row as selected in af:table

Hi,
I am using JDeveloper 11.1.1.4 and ADF-BC in my application.
In all the pages across my application we have multi select enabled for the table[af:table].
But when the pages are displayed,the first row is not selected by default.
My requirement is to display first row as selected across all the tables in my app.
I have the selectionListenerset as for example selectionListener="#{bindings.RSCMapVO2.collectionModel.makeCurrent}" in all the pages.
Please suggest on how to make first row as selected.
Regards,
Praveen

Hi
Put these codes in your selection listner method(You have to define a selectionListner method in your backing bean and put this code segment
(Special thanks go to Franks how posted this code segment. threadID=1089583)
RichTable yourTable = (RichTable) selectionEvent.getSource();
//the Collection Model is the object that provides the structured data
//for the table to render
CollectionModel yourTableModel = (CollectionModel) yourTable.getValue();
//the ADF object that implements the CollectionModel is JUCtrlHierBinding. It
//is wrapped by the CollectionModel API
JUCtrlHierBinding yourTableBinding = (JUCtrlHierBinding) yourTableModel.getWrappedData();
//Acess the ADF iterator binding that is used with ADF table binding
DCIteratorBinding yourTableIteratorBinding = yourTableeBinding.getDCIteratorBinding();
//the role of this method is to synchronize the table component selection
//with the selection in the ADF model
Object _selectedRowData = yourTable.getSelectedRowData();
//cast to JUCtrlHierNodeBinding, which is the ADF object that represents
//a row
JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding) selectedRowData;
//get the row key from the node binding and set it as the current row in the
//iterator
Key rwKey = nodeBinding.getRowKey();
tableIteratorBinding.setCurrentRowWithKey(rwKey.toStringFormat(true));
Thanks
Padma

Make a Note from selection?

Shift Command Y makes a new Sticky from a text selection.
How can I make a new Note from a text selection?
I was unable to find/make an automator action for this.
The current method of Sicky note -> copy paste into Notes for synching to iOS is somewhat clumsy.
Any thoughts on this?

Thanks, TimeRemapper this function still works in AE7, but it generates the same result as selecting all the clips and selecting File>New Comp From Selection. . .
I tried a set of files with unique names instead of a series of clips with the same clip name followed by a number. The list of unique named files generated a Comp with the number 2 after each comp name for every new comp created.

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

How to make default values in selection field?

hi,
      i have selection field date , using data element 'QENTST' using following code in view INIT Method. i get the input selection field when i test application.
DATA: LT_RANGE_TABLE TYPE REF TO DATA.
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
EXPORTING
    I_TYPENAME                     =     'QENTST'
RECEIVING
    RT_RANGE_TABLE           =     LT_RANGE_TABLE.
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
EXPORTING
    I_ID                                     = 'QENTST'
    IT_RESULT                         = LT_RANGE_TABLE
    I_OBLIGATORY                 = ABAP_TRUE.
What i need now , to make default value in this selection field( low = sy-datum and high = sy-datum + 10 ) . I have checked , i found one method called... SET_RANGE_TABLE_OF_SEL_FIELD. Bt i m not able to understand how to assign values to input table parameter in this method?
Thanks In Advance.
Saurin Shah

Hi,
Refer this Article by Thomas on how to make default values in Select Options:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60474842-91ca-2b10-3390-d2fd30f335fd
I hope it would solve your problem.

How to make Avery 8160 address labels using pages

Anyone know how to make Avery 8160 address labels using Pages?

Open the Avery 8160 Word template from their website.
Peter

How to secure an iPad from improper use?

How to secure an iPad from improper use?
Hi everyone - We are thinking of providing our sales reps with iPads to use as product catalogs (by opening a PDF file) however we wish to restrict them from doing anything else. Is there an app or something which would enable us to restrict the tablet in this way?
Thanks a lot

The only option would be to set up the iPad to open a PDF reader app as the sole app in Guided Access:
http://support.apple.com/kb/HT5509
That's the only way you can limit an iPad to using only a single app. That would seem to make the iPad rather overkill, if all you want is for them to be able to read PDFs. Something like one of the base-model Kindles might be better suited to the task.
Regards.

My message always comes from my iCloud @me handle and not my other IM accounts when I send an IM? How to make it come from my @gmail account?

My message always comes from my iCloud @me handle and not my other IM accounts when I send an IM? How to make it come from my @gmail account?

Hi,
As you have found in the View Menu of iChat is the option to Display the Recipients Bar
This bar when clicked will display the Screen Names that you know for your Buddy and your own Screen Names.
The Buddy's names are in the "To:-" section whilst your own are in the "From:-"
Example pic from my iChat 6
The Chat window has to Be Open.
The Buddy's current name becomes a Drop Down that show the To and From names.
It appears to allow you to Connect Google or Jabber IDs to AIM Buddies but the tick will move to any valid Account if you change either the To choice or the From choice.
AS you say about the add Buddy drop down that appears - when your Buddy list are displayed as one an extra drop down appears fro you to Select the account/list it is joining as a Buddy
8:17 PM Wednesday; January 4, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to find max(time) from table using group by

how to find max(time) from table using group by
select var max(time)
          from table
          into (var1, time1)
           where .....
             group by var.
it is fetching record which is top in table.
if u can help?
regards.

No this will fetch the maximum time from teh table.
select var max(time)
from table xxxx
into (var1, time1)
where .....
group by var.
Refer this code
TABLES SBOOK.
DATA: COUNT TYPE I, SUM TYPE P DECIMALS 2, AVG TYPE F.
DATA: CONNID LIKE SBOOK-CONNID.
SELECT CONNID COUNT( * ) SUM( LUGGWEIGHT ) AVG( LUGGWEIGHT )
       INTO (CONNID, COUNT, SUM, AVG)
       FROM SBOOK
       WHERE
         CARRID   = 'LH '      AND
         FLDATE   = '19950228'
       GROUP BY CONNID.
WRITE: / CONNID, COUNT, SUM, AVG.
ENDSELECT.

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

How to delete an operation from order using the bapi

Can somebody please tell me how to delete an operation from order using the bapi
BAPI_ALM_ORDER_MAINTAIN.
Following was the test data for the BAPI.
000000 OPERATION DELETE 0000040052810070
000000 SAVE 0000040052810070
Even I tried entering the operation table. The BAPI control ends fine, but when I check the order using IW32, the operation still exists.
So, can you please tell me where Iam going wrong.

Hi Subash Mohanvel,
Check bapireturn parameter of the bapi BAPI_ALM_ORDER_MAINTAIN after execution of the code , and if there is no error message in the return table then call bapi_Transaction_commit.
Unless you call this database saving of the records/values will not get reflected in the system.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

How to make a comp from selection using clip names

Similar Messages

Maybe you are looking for