How to make a contour (3D) plot with motor control and DAQ?

Hi,
I have a instrument sitting on a movable slider. What I am doing right now is :
a) Go to position 1 and wait until position reached.
b) Measure the spot.
c) Go to next position.
What I want to do:
a) Move the device and measure continously at the same time.
Question: Is there a strategy, how to bring those to data streams (positions, measured data) together with not so much effort?
System: I am using Labview 2014. Data aqcuisition rate is 20Hz.
I can think of: collect data in a queue, manually setting timestamps and comparing them afterwards. But I guess, there is an easier solution existing already somewhere... Any advice?
I can not easily support correct VI´s, because they require hardware connected. I will build a simulator in the meantime

I made a small simulation Vi. But as I understood now, Labview can only scale the indices and not have a real matrix of data points with different distances.... So I need to have equal time distances and equal movements over the surface. I thought, I should track the actual position and give that arbitary parameters as an axis.
Attachments:
simulation of intensity graph synchronize.vi ‏18 KB

Similar Messages

How to make a jsf parameter form with a selectOneChoice and data control

I want to make a parameter form with a selectOneChoice and store this value in a backing bean, so I can use as a bind variable in query. I already made it happen without data control
Can someone show how to do it in adf data control. With the wizard it tries put the value
in a viewobject but I don't have base or destination viewobject. I can change the pagedef
so it works to fill the selectOneChoice but then I want to store the selected value in a session beab
here is solution with the application module and request / session bean, I don't
think it is the right solution
thanks edwin
jsf page
<af:selectOneChoice label="Desk" value="#{selectDesk.desk}"
id="DeskID"
binding="#{selectDesk.deskBinding}"
autoSubmit="true"
valueChangeListener="#{selectDesk.deskChangeListener}">
<f:selectItems value="#{selectDesk.deskSelectItems}"/>
</af:selectOneChoice>
Selektdesk backing bean
public SelectDesk(){
FacesContext facesContext = FacesContext.getCurrentInstance();
ValueBinding valueBinding = facesContext.getApplication().createValueBinding("#{userInfo}");
userInfo = (UserInfo) valueBinding.getValue(facesContext);
public List<SelectItem> getDeskSelectItems() {
if ( userInfo.getSelectItems() != null ) {
selectItems = userInfo.getSelectItems();
return selectItems;
if ( getBindings() != null ) {
userInfo.setBindings( getBindings());
else {
setBindings(userInfo.getBindings()) ;
if ( selectItems == null ) {
selectItems = new ArrayList<SelectItem>();
DCBindingContainer bc = getBindings();
SicmaService sicma = (SicmaService)bc.findDataControl("SicmaServiceDataControl").getDataProvider();
ViewObject desk = sicma.findViewObject("DeskSelectView1");
desk.executeQuery();
RowSet rows = desk.getRowSet();
while (rows.hasNext()) {
Row a = rows.next();
String DskId = a.getAttribute(0).toString();
String DskOms = a.getAttribute(1).toString();
selectItems.add( new SelectItem(DskId ,DskOms ));
rows.closeRowSet();
userInfo.setSelectItems(selectItems);
return selectItems;
faces-config.xml
<managed-bean>
<managed-bean-name>selectDesk</managed-bean-name>
<managed-bean-class>org.tennet.sicma.view.backing.SelectDesk</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>bindings</property-name>
<property-class>oracle.adf.model.binding.DCBindingContainer</property-class>
<value>#{bindings}</value>
</managed-property>
</managed-bean>

The SRDemo has an example of a selectOneRadio bound to a parameter being used to pass to an ExecuteWithParams action (to automatically feed a view object's named bind variable. This is in the SRStaffSearch.jspx page.
Also, if you check out example # 72 from my blog:
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#72
There is another example of using a selectOneListbox to do the same type of thing.
The steps involved in creating something like this are to:
(1) Define your named bind variables on your view object
(2) Drop the "ExecuteWithParams" action in the operations folder of that view object from the Data Control Palette to your page as a "Parameter Form"
(3) Drop the specific attribute (nested child of the "ExecuteWithParams" action from step (2) as whatever kind of selectOneXXXX control you want
(4) Delete the extra field on the form you don't want.

How to make an AIDrawArtAGMPort on Windows with CS3, CS4 and CS5

Hi
I want to use the function DrawArt of AIDrawArtSuite.
To use this function, I must have an AIDrawArtGWorld or an AIDrawArtAGMPort or an AIDrawArtAGMPoirtV6 object.
With CS6 SDK, this suite provides a mean to instantiate an AIAGMPort.
With CS3, CS4 and CS5 this function doesn't exist.
On MacOS X, I can build AIDrawArtGWorld.
On Windows, I don't know how to do it.
On Windows how can I make an AIDrawArtAGMPort object ?

Hi,
It is not recommended way to install SAP System without following Standard Installation Method. Please read concerned Official SAP Installation Guide and follow the standard procedure without inviting more complexities and headache.
Regards,
Bhavik G. Shroff

How to make an editable bulleted list with multiple lines and custom bullets?

How do I create an editable bulleted list in Acrobat Pro? I've figured out how to add text fields with multiple lines, and how to add a list box, but I don't see the check box for multiple lines in the list box or how to add bullet points. Can someone please give me step by step instructions? Also is it possible to use custom bullet points?

Is it a text field or a list box field? The two are not the same...
The bullets are something that the user will have to enter manually (into a text field, they can only select values in a list-box).
They can use any unicode character, or special characters if the font used for that field allows for it. You can't use images for the bullets, if that's what you mean.

How to make a original frame same with Comment List and Attachment?

How can I make original frame looking like Comment List?
I'm using Windows XP and Adobe Acrobat 9 Pro and Acrobat 9 SDK.
I want to make a new plug-in that use a new frame.
The new frame is looking like Comment List and Attachment.
I want to show my original list and input form to the frame.
It is close to Comment List frame, but I want to show original list.
Additionally, I want to add new button upper of Comments Button on Navigation Button Panel.
Can I have any help?

There is no support in the SDK for adding your own panels.
There is no support for modifying the existing panels.

How to make a selection of a layer delete content and paste another content with Photoshop scripting..?

how to make a selection of a layer delete content and paste another content with Photoshop scripting..?

There is a more specific Forum …
Photoshop Scripting

How to make an hypertext link workable with adobe reader for IOS ?

Hello,
Hypertext links in a PDF file work perfectly well on Mac OS (Yosemite).
The same document on an IPAD with IOS is not able to open an hypertext link ...
How could I do to solve this problem ?
An author who want to publish electronic books with hypertext links on mobile devices

Hello Steve,
All my best wishes for the new year.
To answer your question :
. I am writing books on my IMAC with Yosemite (10.10.1) using Word (14.4.7)
of OFFICE MAC.
. I can open Hyperlink connection by clicking on the link
. I save the document in a .PDF format
. This document is sent to my IPAD with IOS 8.1.2
. In this .PDF document I am no more able to open hyperlink connection
Please see attached an abstract of my book.
Thanks a lot for your help and advices.
Michel Poncet
Tel: +33 4 76 89 50 82
http://www.amazon.fr/Glariand-Copent/e/B007NXP7FU
De : Steve Werner <[email protected]>
Répondre à :
<[email protected]>
Date : vendredi 2 janvier 2015 03:34
À : Michel Poncet <[email protected]>
Objet : How to make an hypertext link workable with
adobe reader for IOS ?
How to make an hypertext link workable with adobe reader for IOS ?
created by Steve Werner <https://forums.adobe.com/people/Steve+Werner> in
Adobe Reader for iOS - View the full discussion
<https://forums.adobe.com/message/7058559#7058559>
Hyperlinks can be of several types. What are you linking to? Exactly what
application did you test the hyperlinks with on the Mac? What application
did you use to create the hyperlinks?
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7058559#7058559 and clicking Correct¹
below the answer Replies to this message go to everyone subscribed to this
thread, not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in
your message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7058559#7058559 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Adobe Reader for iOS
by email
<mailto:[email protected]eso
ftware.com> or at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=
14&container=4631> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.

Hi all, how to make slide show on Iweb with out QuickTime?

Hi all, how to make slide show on Iweb (with out QuickTime or link to YouTube) to be watched in any computer/system?
I used Imove - share - exported - medium (m4v)
This the one I did.
http://360motorcycleadventures.com
Must looking profissional (no YouTube frame)
The problem is: I lot people don't have QuickTime, any body can point me the right direction?
Thanks' in Advance.

I use this slideshow often :
http://www.wyodor.net/iWebBlogTest/Wyodor_1/WebBanner.html
See it here in an iWeb page :
http://www.wyodor.net/_Demo/MyHouse/Huis.html
These are the slideshows :
http://www.wyodor.net/_Demo/Gardens/flagstones.html
http://www.wyodor.net/_Demo/Gardens/gardens.html
And here in a non-iWeb page :
http://www.wyodor.net/htmlegg/SmallCard/SmallSlideshow.html
This is the slideshow itself :
http://www.wyodor.net/htmlegg/SmallCard/VintageParis/
Or use WOW slider :
http://www.wyodor.net/htmlegg/TallCard/TallWow.html
There are lots of slideshows out there. Choose the one you like.
And search/browse this forum for other solutions.

How to make pdf file auto open with adobe reader after downloaded

how to make pdf file auto open with adobe reader after downloaded

I note from your system details that you have the plugin for adobe pdf s so I would have expected the files should open in firefox '''without''' you needing to explicitly download them.
Once the files are open in firefox, you will also get the option to save them permanently to a location on your computer. If you wish I suppose you could set the file type pdf to be associated with and be opened by firefox instead of with the Adobe Acrobat Reader, but that would just seem to be an additional complexity.

How to make a list item field with DATE data type?

I have a column with DATE data type. Using forms 6i I want to generate a poplist list item field with this column while the value of the elements in the list to will be day names like SATURDAY,SUNDAY,MONDAY. if we change the data type from date to char, it will work properly but now with DATE data type behind it, it gives the following error message
"FRM-32082: Invalid value for given item type.
List WEEKREST
Item: WEEKREST
Block: EMPRESTS
Form: MODULE3
FRM-30085: Unable to adjust form for output."
Using forms 6i how to make a list item field with DATE data type which can hold day names?

Set your date column as a hidden (non-displayed) field. Create your list item with the varchar2 day names. Create the list item as a non-base-table field that accepts the text values of day names. On that field, create a when-validate-item trigger that translates the text into a real date, which it then uses to set the value of the actual base-table item.

How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

@Bennycui,
Clean install here
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-77353
Then install RapidBoot
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-77013
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

How to make the mobile application work with firewall and anti-virus ON

Hi,
I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
Thank you

Dear Rajesh,
Create a policy in your fire wall to allow the port to send and receive data.
I believe the port for the mobile should be port 8080 and 8443.
And your license server port 30000 and 30001
nd.Q

How to make "visa find resource" working with Agilent device

I am trying to use Agilent 82357B GPIB device with LabVIEW for instrument control.
I have checked:
1.       NI-VISA (ver 5.1.1) is the primary visa by checking visa.dll properties under windows\system32 folder
2.       Enable NIVISATulip.dll in NI Max Explorer
3.       Enable the Agilent libraries to work with NI 488.2 in Agilent IO library (ver 16).
I am able to communicate with the instrument in Max Explorer and talk to the instrument in LabVIEW with VISA write for almost all commands.
But I can NOT make one particular visa function (Visa find resource) working with Agilent 82357B GPIB.
With NI USB GPIB device, the same code above can find attached instruments as below, where GPIB1 is the Agilent device and GPIB0 is the NI device.
I have no clue on how to make “visa find resource” working with Agilent device.
Please help.
Solved!
Go to Solution.

Quick question. Did you also enable 488 support in Agilent?
If that does'not work try this. and well see if you found a bug
Jeff

How to make a PDF file short ( with less memory)?

How to make a PDF file short ( with less memory)?

@nalinss
There are two ways: "Save as.." usually optimises size, but there is also "Optimize PDF" in the menu with many options what to exclude and to reduce in quality. Be careful here, as pictures can become very bad.
A note: the size of a PDF vastly depends on from what source it is created. For example, if you draw some vector graphics in Visio and print to Adobe Printer, the resulting PDF is usually quite small in file size. Opening it in Illustrator and saving it again after you, let's say, just moved one line, can make it 10x as big. This is due to big overhead, Illustrator creates and this can not be reduced anymore in Acrobat later on. Sometimes it helps to convert or "save as" such an inflated PDF to a different format like EPS or HTML and print or convert again to PDF.
So, if you created the PDF yourself and you still have the source, you may adjust settings in the export/print dialog to make it smaller.

How to make site root-relative links work in DW and Server both?

See details on buggy DW image link behavior, below. My question is:
1) how to make site root-relative links work in DW and Server both? Or…
2) how to reliably automate the change of several hundred legacy root-relative links of the form
/images/image.jpg to document-relative?
That is, to
../images/image.jpg or
../../images/image.jpg or
../../../images/image.jpg etc…depending on where the directory is.
The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
I tried changing the files to how DW creates root relative links now:
/public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link? I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
Summary of buggy behavior: (see test with images here)
"old style" site root link
      /images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a (existing format)
"new style" site root relative link
      /public_html/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: broken
      Ease of switching: easy
Document relative link
      ../../images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: good
      Ease of switching: hard (how to automate?)
Absolute link
      http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a...not a real option
Thanks!
Similar discussion on "/"

Hello again Jon!
Thanks for jumping on this.
All clear and understood about where publc_html is etc.
No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
"/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url, which is automatically set to http://www.oasisdesign.net/public_html/
it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
Art
PS--don't have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
Is there an easy, automated way to change links sitewide from document to root relative?

How to make a contour (3D) plot with motor control and DAQ?

Similar Messages

Maybe you are looking for