How to make a diagonal split screen in CS3

Dear Folks,
Any body now how to make a digonal split screen in permiere pro CS3?
A normal split screen is ok like two videos side by side.
Regards,
TP

This is an example of what Bill is saying...give him credit... I just illustrated...photoshop files for the mattes...pure white and pure black...
ps..if you dont want such a sharp line between the screens you can select the matte area in photoshop and "feather" the selection a few pixels...

Similar Messages

How to make Label in selection screen?

Hi friends.. can anybody explain how to make labels in selection screens and how to split the selection screen vertically? plz.. Thanks in advance

Arun kumar,
Check this program. you can put labels like this.
REPORT ZVENKAT_TEST1.
SELECTION-SCREEN BEGIN OF BLOCK block.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(15) text1.
SELECTION-SCREEN POSITION 17.
PARAMETERS :p_pernr type pa0001-pernr.
SELECTION-SCREEN POSITION 26.
SELECTION-SCREEN COMMENT 27(30) text2.
SELECTION-SCREEN end OF LINE.
SELECTION-SCREEN end OF BLOCK block .
at SELECTION-SCREEN OUTPUT.
text1 = 'Personal number'.
SELECT SINGLE ename FROM pa0001 INTO text2 WHERE pernr = p_pernr.
Regards,
Venkat.O

How to make the diagonal line in the swing table cell?

Hi all,
How to make the diagonal line in the swing table cell just like the link below?
http://61.132.17.188/webber/table.gif

One improvement.. To get a line that is neat, use a bit of Graphics2D
    public void paintComponent(java.awt.Graphics g)
        int w = getSize().width;
        int h = getSize().height;
        // draw a line between (0,0) and (w,h)
        g.setColor(getForeground());
        if (strTop == null)
            strTop = " ";
        if (strBottom == null)
            strBottom = " ";
            java.awt.Graphics2D g2 = (java.awt.Graphics2D)g;
          g2.setRenderingHint(java.awt.RenderingHints.KEY_ANTIALIASING,java.awt.RenderingHints.VALUE_ANTIALIAS_ON);
          //g2.setStroke(new java.awt.BasicStroke(14.0f));
        g.drawLine(0, 0, w, h);
        //the following lines will draw the two strings,
        //one above the top of the line and the above below it.
        g2.drawString(strTop, (w/2)+2, (h/2)-2);
        g2.drawString(strBottom, 2, (h / 2) + 2);
        //the x,y for drawString are only based on assumption.   //do necessary changes to suit ur needs.
    }Then create a TableCellRenderer and set it to the Table Header for ur table's 1st row.....
Cheers

How do I get the split screen effect?

How do I get the split screen effect?

Put a clip on V1, layer another above it on V2 or higher. Add CROP effect to higher track clip, crop left or right side to reveal V1 clip below.
Jeff Pulera
Safe Harbor Computers

How to make keynote images full screen?

Question: how to make keynote images full screen? I just noticed. after many successful full screen shows with Keynote 09 5.1.1 that I am no longer seeing the show full screen, at 1280, but only using the center part of my macbook pro 13 inch screen (which will mirror just like that on the projection screen, as far as I know). Did I hit a setting I do not know about to keep the images so small?
Thanks

Keynote > Preferences > Slideshow: Scale slides to fit display

How to make a diagonal ellipse?

Hi everybody,
I've been trying to work out how to make a diagonal ellipse.
Could someone please help me with this? Thanks in advance.

This visually displays a rotated ellipse.
Ellipse2D ellipse = ...;
Graphics2D g2d = ...
g2d.rotate(angleInRadians,ellipse.getCenterX(),ellipse.getCenterY());
g2d.draw(ellipse);Or if you want an actual Shape object that represents the rotated ellipse, then
Ellipse2D ellipse = ...;
AffineTransform tf = AffineTransform.getRotatedInstance(angleInRadians,
ellipse.getCenterX(),ellipse.getCenterY());
Shape diagEllipse = tf.createTransformedShape(ellipse);

How do you disable the split screen / multi-window feature.

I have had my phone for 2 days, and I can not figure out how to turn off the split screen/multi-window feature. It pops up automatically at the worst times and it is getting very frustrating. I have read many things on how to use it, but have yet to find any thing that explains of to disable it.

Well, it doesn't seem that there is a way. But I solved my
problem because my minimal player was Flash 7,0,29,0 and reset the
minimal player to 7,0,0,0.

How to show subscreen in split screen

Hi all,
Basically i want to show one tree control in left pane and all relevent subscreens in right pane.
But, I am not able to create subscreen area in right pane.
How i can create sub screen area and/or subscreens in split screen control.
Thanks,
Jogdand M B

Hi Machindra,
I also faced the same kind of problem previously. Actually there is no container which can contain normal dynpro screens / subscreens / ui elements.
However you can still implement the same kind of scenario.
As you said you want to have splitted area - left area should have tree control and right area should have subscreen.
What you can do is make use of docking container (class CL_GUI_DOCKING_CONTAINER) like -
1. Create your normal dynpro screen with a subscreen area as you wanted.
2. In a PBO module write code for creating tree control in docking container, like -
DATA: <docking container object> TYPE REF TO CL_GUI_DOCKING_CONTAINER,
      <ALV grid object>          TYPE REF TO CL_GUI_ALV_GRID.
CREATE OBJECT <docking container object>
              EXPORTING repid     = repid
                        dynnr     = dynnr
                        side      = docking->dock_at_left
                        extension = 180.
CREATE OBJECT <ALV grid object>
       EXPORTING I_PARENT = <docking container object>.
CALL METHOD <ALV grid object>->SET_TABLE_FOR_FIRST_DISPLAY
     EXPORTING I_STRUCTURE_NAME = 'SFLIGHT'
     CHANGING IT_OUTTAB        = <output table>.
Regards,
Manish Joshi
I hope you know how to award points

How to do a locked split-screen between two different video tracks

I'm creating two time-lapse videos and then I'm planning to to play them side-by-side in one sequence.
The way I was planning to do this was to scoot one video track over using the "center" tool in the motion panel, and then crop it on its right-hand edge to reveal the other video track beneath.
The problem with doing this however is that, as the camera gets bumped or moved slightly as the months go on, and I then have to cut and reposition the "center" location for the clip, I have to then adjust the amount of crop on that video clip since I've moved its position. This means the center split-screen location keeps changing as I move the video around.
Is there a way where I can just lock the split screen smack in the middle of the frame as I tinker with each side of the frame (video track) independently? I tried adding a split-screen transition in the very beginning to the top track, but I can't make cuts on a transition to then adjust the motion attributes.
Any ideas on how to simplify this process would really be appreciated. Originally, I thought there was no easier way to do this, but I was so blown away by all the answers to my motion effects question today (and all the things I never knew about FCP) that I thought it wouldn't hurt to see if someone out there had one more ace up their sleeve. If not, I'll assume this is one of those things that can't be simplified anymore than what I'm doing.
Thanks again guys,
Chris

Though David's Motion Tracking suggestion would eliminate alot of later finagling, you could try something similar to Reink's, without using Photoshop.
Try this...
1. In a seperate timeline, drop a Matte/Color Solid into the new timeline (using dropdown at bottom right of Viewer window).
2. Dbl-click the color solid, click on Controls tab and set Parameters as H/0, S/0, B/100. Then click the Motion tab/Crop Right-50.
3. Click the Viewer's Video tab and go to Export/QTConversion/Still Image (png) and name it something like WhiteMatte_CropR50.
4. Import that into your project.
5. Now with your two timelapse clips on V1 and V2 with in/out points at head/tails and both tracks highlighted...'Nest' the sequence...Main Menu/Sequence/Nest Item(s).
6. Next, with the nested sequence active (single clip will look light purple)...option-double click on it and and drop an Image Mask Filter on it, then drag the WhiteMatte.png clip into the 'image well' (little box that has a question mark in it). Keep the channel on Luminance.
7. Now, if you dbl-click the nest, it will open it's host sequence, that you can do your 'Motion Tab/Centering' on, without affecting the 50% split down the middle.
May seem like alot of work, but it's not really.
K
p.s...there are probably other ways to do this as well.

How to make a dynamic selection screen

Hi
I have been searching the SDN for long time, but couldn't find the answer, so therefor a new post.
I have an internal table with following values:
VBKD-BSARK_E
TVKO-VKORG
By these values I would like to make a new selection-screen whith following:
Parameters: FIELD1 like VBKD-BSARK_E.
Parameters: FIELD2 like TVKO-VKORG.
Next time the internal table can contain
MARA-MATNR
TVKO-VKORG
VBAK-BSTZD
And the parameters should then be:
Parameters: FIELD1 like MARA-MATNR.
Parameters: FIELD2 like TVKO-VKORG.
Parameters: FIELD3 like VBAK-BSTZD.
How do I do that -any suggestions?

Hi,
This piece of code will design selection screen based on radio button selection:
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 .
    SELECT-OPTIONS : s_date FOR pnpbegps DEFAULT sy-datum .
    SELECTION-SCREEN: END OF BLOCK b1.
    SELECTION-SCREEN : BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS:rb1 RADIOBUTTON GROUP rbf DEFAULT 'X'.
    PARAMETERS:rb2 RADIOBUTTON GROUP rbf .
    SELECTION-SCREEN: END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003 .
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(25) text-006 FOR FIELD px_pdf.
    PARAMETERS: px_pdf AS CHECKBOX USER-COMMAND xxx .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(15) text-004 FOR FIELD rb_app.
    PARAMETERS:rb_app RADIOBUTTON GROUP gbf DEFAULT 'X' USER-COMMAND uc01.
    PARAMETERS: p_file(128) MODIF ID 001.           " application server
    SELECTION-SCREEN END OF LINE.
Thanks,
Krishna..

How to make the title of screen dynamic in ABAP.

Hi experts,
I want to make the title of screen dynamic like:-
--> i have an initial screen in which program takes some input files..and having a screen title as "INPUT FILE" with a read button.
--> after clicking on read button it reads that file and shows on screen that exel file...here this screen title remains the same as "INPUT FILE" but i want it as "READ FILE". now this screen again having a button as write file.
-- > Now after clicking on this write button this file gets write in to SAP system here i want my screen title as"WRITTEN FILE".
Please help me and tell me the way to do it.
Regards,
Depque.

Hi.
Ypu should use a flag as soon as someone clic on the button, in order to keep a value.
Then in PBO Module you should ask for the value of this flag
if w_flag = abap_true ('X')
set tittlebar number01.
else.
set titlebar number02.
endif.
Please let us to know if this could help you.
Regards,
Gabriela

How do I do a split screen to show the contents of my Library and a playlist at the same time?

I’m using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4.
I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so the songs in my playlist show in one window and the library shows in another?

See this thread -> https://discussions.apple.com/thread/5666364

CS4-How do I remove a split screen in the Program monitor window?

I have Pro CS4 on a vista 64 OS. I am using the Mainstream encoders and my Program monitor window switches to a split screen every time I play the timeline. When I stop the playback, the screen returns to normal full screen with the last frame showing. When I start the playback again, the screen splits into two screens squishing the actual playback window to the left part of the monitor window. Any Ideas? Thanks.

I found the solution by changing my quality settings (in the top right hand corner of the program display window) from "Automatic Quality" to "Highest Quality".
I am not sure why it affects the display in this manner, but it just works this way and it is repeatable.
I am working with 50 Mb MXF files from a Sony PDW900 HD camera.I use the Mainstream codecs to inport the files. I am using a Nvidia Quadro CX as a video card with the latest drivers. I first thought that the Mainstream codecs were affecting the display somehow, but then again, I do not remember changing these display settings. Thanks for the suggestions, I appreciate the response just the same...

How do I create a split screen on a motion clip in Photoshop CS6?

I have a project due soon and the last requirement is to "create a split screen on a motion clip". Any ideas? Thanks!

In the time line panel you will either need to split the video by moving the playhead to the location then click the split button. Or you can add another video if you want two different video's playing.
Because one video is on top of the other you need to scale both videos so they fit the screen. Select one video the press ctrl-t on windows or cmd-t on mac to enter transforms mode. Click and drag the corner to scale the video. Then repeat for the other video. You will also have to move the video's into place.
When satisfied click enter or return on keyboard.
Ex. For standard video the document should be (in the USA) 640x480 pixels. (I believe Adobe states it should be 720x480 for video, but this is only an example)
So, to place two video's side by side each video would have to be divided by 2 for the width. 320x480
When you move the video's they should snap into place.
For two video's that stack, the height would be divided by two - 640x240

How to make my safari full screen?

how to make my safari fullscreen?

Click the gray double arrow at the top right corner of the Safari window.
or
Safari > View > Enter FullScreen
http://support.apple.com/kb/PH11941
Best.

How to make a diagonal split screen in CS3

Similar Messages

Maybe you are looking for