How to make a directly usable Bluetooth network location

I've configured a Bluetooth modem to use as a modem to
connect to the Internet. I've defined the secured pairing
between my Mac and my mobile.
I've defined a network location to connect through Bluetooth
with my mobile phone.
Everything is working correctly in three steps:
1. switch to the Bluetooth network location,
2. turn Bluetooth on in the menu bar,
3. select Connect in the phone drop down menu (in the menu
bar).
What is the simplest way to make all this process a one step
one:
1. switch to the Bluetooth network location ?
On the other hand, when I have to leave this connection,
everything is working correctly, except that the Bluetooth
connection stays up. Hence I have to turn Bluetooth off
in the menu bar. Otherwise there is a serious useless
but endless microwave activity, power consumption and
security problem. My Bluetooth connectivity is still up!
What is the simplest way to make the switching to another
kind of physical connection switch off the other ones?
dan    

SQL> set autotrace on explain
Run the query to see if the index is used, use a where clause to
select * from table where indexed_column=value;
Cheers
Justin Miles

Similar Messages

  • HT201270 MORNING COMMUNITY, anyone know how to make the i4s forget a network - when the device won't give you that option?

    MORNING COMMUNITY, anyone know how to make the i4s forget a network - when the device won't give you that option?

    if you dont have the options to forget network you can reset your network settings, but than the device forget all networks
    settings > general > reset > reset network settings

  • How to make a form usable but uneditable

    Hi guys. I built a form in QuarkXPress, saved it as a PDF, then opened in Acrobat (v8.2.4) and added form check boxes and text boxes to it. I do not need to get information returned to me, this is simply for my customers to use for themselves. I'd like the form to be printable (even though if the text in the boxes is too long, I know it probably will get cut off). What I want to ensure is that no one can open this file in Acrobat and tamper with it.
    Is it possible to make the file usable by clients but not editable or changeable so I can control the document information?
    Thank you for your reply!
    Catherine

    It turns out I'm going to solve my problem a different way (have people print out the workbook and write in their answers), so I'll probably try to "secure" it as much as possible to protect the copyright, but won't need to have fields to fill in. I can use the answer I got for future reference, however. Thanks for the answer, and for the forum!

  • How to make a computer invisible in  network?

    I was amazed that in the left-hand panel of FINDER, under the SHARED tab, there are about 6 other computers that I am seeing. I am concerned that others may be able to access my computer via my wireless connection. How can I make sure I am protected, and my computer is invisible to them?

    Go to System Preferences > Sharing > uncheck everything in the left window. If you're not sharing anything you won't show up.
    Regards

  • How to make a INTERNET ONLY wifi network for guests at a business..

    hey guys/gals:
    im trying to set up a public network for guests at my business. i only have one internet subscription for the building and a big server and several switches in the basement providing wired 100base-T network connections to all my computers. they are all on the same network and domain. 
    now i want my guests to have internet access ONLY. I don't want them to even be able to see any of my printers, computers, servers or anything! just the web. what equipment do i need and how do i set it up?
    -thanks in advance

    You can use the Wireless router or the Access point to provide the wireless network.However,there is no such option on these devices.
    Guest user can not access your computers,printers or servers unless or until you give "Sharing" permission to them.So if enable sharing and give permission then only the Guest user can share your computers or printers.

  • How to make script depended on specific network???

    I hope that someone can help me with this. I do not yet have much experience with scripting, but I made a script which connects my macbook to a folder on my NAS. However, if my local network is not available the script will hang itself waiting until it can mount. Also limiting the repeat loop does not help since it will still hang within the loop. I was just wondering if I can start the script with a command which says that the script should only be executed if connected to a certain ip adress or Network-name. This is my script sofar:
    tell application "Finder"
    repeat
    if not (exists folder "Backup" of desktop) then
    try
    mount volume "afp://user:[email protected]/Backup"
    end try
    end if
    if (exists folder "Backup" of desktop) then exit repeat
    end repeat
    end tell
    Thanks for any help in advance!

    Thanks, that's helpful! Reason of the repeat is that the real script contains three folders to which the computer has to connect. Sometimes the computer/NAS is still busy doing something else so it needs an extra attempt before connection is made.
    By the way, for those who are interested, I seem to have managed to make a script to check for the network first:
    set myIP to (do shell script "system_profiler SPAirPortDataType|grep -e 'Current Wireless Network:'")
    if myIP does not contain ("Current Wireless Network: xxx") or myIP contains ("turned off") then error number -128

  • How to make MAC print to an network printer on a non default port.....

    Hello
    I have a Gestetner 3235PCL printer at the office. The printer is on IP address 192.168.1.10 using Port 9101.
    I can't seem to find a way to make the computer print to anything but the default port.
    Any ideas if this is possible using a Mac?

    Bruce is correct, but be certain you select IP > HP Jetdirect-Socket. Then enter the IP address with the port number separated by a colon " : ".
    You could also use the CUPS web page to add the printer. At the Device menu, select 'Appsocket/HP Jetdirect' and then at the Device URI menu, after socket you can enter the IP address with port 9101, such as
    socket://ip_address:9101/
    Do you know if the printer is using a Fiery controller? I know the Fiery's offer three ports alternate to 9100 so that you can connect to a specific queue. 9100 will print to whatever has been selected as the default queue in the controller config, such as print, while 9101, 9102 and 9103 are the direct, print and hold queues respectively.
    Pahu

  • How to make FireFox work on Mobile Network APN?

    Firefox for Android Mobile latest version well when on WiFi, but is not able to detect Internet connection when on Mobile Network (through APN).
    Thanks!

    Make sure of your Access point settings

  • How do I re-direct all my songs' location?

    Hi guys,
    Originally I placed all my songs at my F drive, F:\music. But my laptop encounters some problem few days ago, so I just recovered my C drive.
    After recovery, the system automatically changed the hard drive names that my F: drive becomes D: drive now. In another words, all my songs are at D:\music rather than original F:\music.
    Therefore, iTunes now can't find the correct locations and show exclamation mark in front of each song. I tried to edit Library.xml and replace all F: with D:, but it did't work. Is there any other way that I could solve this problem without re-drag all the songs into the library? In this case all the previous information would be gone, such as rating and play count.
    Thank you very much!

    You could simply delete all music in your iTunes library, then re-add it all in its 'new' location on your D:\ drive.
    Make sure you don't accidentally delete anything permanently, though; that could make things significantly more complicated.

  • How to make memory card as the default location fo...

    Can I make the memory card as the default location for installion of Ovi apps?
    I have a Nokia C6-00 and if this is possible, anyone who can teach me do this thing?
    Thanks in advance. :-)
    "Always at the edge"

    You cannot make Google Maps the default mapping app.

  • How to make a DAG Strongly Connected?

    How to make a Directed Acyclic Graph a Strongly Connected one by adding minimum number of edges into it?
    Thanks

    anryb wrote:
    How to make a Directed Acyclic Graph a Strongly Connected one by adding minimum number of edges into it?A strongly connected graph has a path from every vertex A to evey vertex B but then a path from B to A exists as well violating the acyclic directed property of the graph.
    Or is the graph allowed to lose its DAG property in the process?
    kind regards,
    Jos

  • How to Make Wirless Network SECURE

    I am running my desktop hard line to a comcast modem which runs XP Pro. My Laptop which is running Vista is set up wireless via the WRT54GS Linksys Router.
    The wireless network is running great but it is identified as UNSECURED!
    After three 30 minute waits last night, 2 disconnects when I was not understanding them ( not a computer whiz but I do ok) and 1 live chat tech that copy and pasted the directions on how to set it up but not how to make it secure and then a quick disconnect    .
    Can anyone tell me exactly HOW TO MAKE THIS NETWORK SECURED and WHAT computer shall I use to perform this?
    Thank you for any help you can give me,
    SWAT
    JohnDoe sorry for violating any rules.
    (Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 08-27-2007 11:04 AM
    Message Edited by SWAT on 08-27-2007 11:13 AM

    SWAT wrote:
    Sbatch...you click on the pull down window to the settings.....I click on WPA then I input the code I wanted (only room for 1 code) then scroll all the way down to click on save settings.
    That method does not secure my laptop wireless settings?
    **No, that secures your router's wireless settings.
    or
    Is this the only method to secure the network?
    With some investigation I can find have found the following:
    If I right click on my Network Icon in my tool bar and then click Connect to Network and then right click on the Network and right click Properties I get a box with the following:
    Tab for connection and a tab for security with pull down bars which can be changed...
    1) Security Types -No Authentication (open), shared, wpa2 personal, wpa personal, wpa2 enterprise, wpa enterprise and 802.1x
    2) Encryption Types -WEP
    Current settings on my laptop Linksys wireless network security is
    Security Type- OPEN
    Encryption- NONE
    sBatch when I perform the WPA on my desktop my laptop must be off or not on the network correct?
    Doesn't matter, once you change the security settings onthe router, you will be prompted for the settings to reconnect to it.
    Has anyone found the LinkSys hyperlink for setting the WRT54GS router as SECURED?
    Define "secured".  Wired, only physical connection have access.
    Wireless, once you add WPA or WEP (WPA is better) it's secured.
    Sincerely,
    SWAT
    Does that help?

  • How do i make my iphone 5 bluetooth not discoverable

    How do i make my iphone 5 bluetooth feature "not" discoverable so that my phone is secure from hacking while i am in public and the bluetooth feature is turned on.

    The iPhone can only be discovered when you are in the Bluetooth menu at Settings > Bluetooth. You'll see under Devices it shows Now Discoverable.
    If you are not at this menu, it is not discoverable anmd it will not show up on other devices.
    Simply having BlueTooth on does not make it discoverable.

  • How can I make a shortcut for bluetooth in my iPhone 4 ?

    Hello everyone
    How can I make a shortcut for bluetooth in my iPhone 4 ?

    sorry not that I know of, out of the box that is, would be heady to quickly change between headset and normal mode though
    let apple know you want this feature
    http://www.apple.com/feedback/iphone.html
    there are 3th party solutions though
    http://www.macrumors.com/2012/04/17/new-app-turns-bluetooth-on-and-off-with-one- touch/

  • I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

Maybe you are looking for

  • In Lion 10.7.5 is there a way to view files in alphabetical order in column view?

    In Lion 10.7.5 when viewing files/folders in column view, if I select arrange by name it does not sort the names alphabetically.  Is this a bug or is there a way to view files in alphabetical order in column view?

  • Using video out as a preview monitor

    I recently purchased the vga adapter to go from iMac G5 (non-Intel) to a separate VGA monitor to use as a preview minotr with FCP. However, I'm only able to use my VGA monitor to mirror the desktop of my iMac. How can I change this? Maybe this is a q

  • Convert  XML page into Internal Table

    Hi, I'm not sure if this post belongs here or not, but here goes. I have a requirement to read in data from a xml page and save the contents into a ABAP internal table. At the moment, I have extracted the contents of the XML page into a string using

  • Creation of Schema in Oracle after checking

    All, My sincere apologies to post this here, but I did not find the answer anywhere. I have a task to convert some SQL Server Scripts to Oracle. The below is the sql server script to create the schema called HRMS after checking whether it is existing

  • Centering a Table in Pages '09

    My document has a small table in the middle of text. The table (the whole thing, not just the cell text) is against the left margin but I want it centered. The Inspector > Metrics has the X and Y grayed out. How can I center the table? Thanks from a