How to make a DVD 5 from a project?

I have a FCP project just short of 3 hours long and my client has demanded a DVD 5 preview copy with burnt in timecode. Can anyone advise on how I can do this?

You said,"I use a DVD recorder to create BITC copies directly from FCP's Timeline."
I used to make a master on my Sony DVD HD deck and then down convert it onto a DVD recorder, with the time code display on.A bit long winded. I didn't realise you could go from the time line, are you simply playing it back ie pressing the "Space bar"? and if so how do you burn in the time code?
I think I'd rather try and burn a DVD on the computer, I'll give it a go.

Similar Messages

Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)

Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)

Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W

How to make one dvd from several camcoder dvd's

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

How to make a dvd from an iPhoto 9 slideshow?

How do I make a dvd from an iphoto 9 shideshow with a macbook pro

You cannot export it as a movie, the only way is to export it as a slide show. Select the quality (bare in mind the higher the quality, the more space it will take up) and click export. It is compatible with ipod touch, iphone 4+, ipad apple tv, mac and PC. Select automatically send slidshow to Itunes, and you can sync it with any device.
Hope this helps

How to make a DVD from MPEG-2 clips without re-encoding?

I have many standard DVDs (in MPEG-2 unfortunately) with unedited video footage. I want to extract the best parts of those DVDs and compile them to a new DVD without re-encoding (no fancy scene transitions needed).
I have a program called Cinematize 2, that lets me rip the parts I want as "Main Video Stream" (QT), Elementary streams or MPEG2- Program streams. I can save audio and video as one or two separate files. Which ones works best with DVDSP? I would prefer to save as MPEG-2 Program Stream (one file), as these files can also be played back on the computer with the VLC player.
If I have many different MPEG-2 clips, if I make a DVD with DVDSP, can those clips be played back to back like a movie?
I would appreciate any advice on how to to this the best way I want to have as many options open to me as possible in the future. In particular, in which state or format I should save the files from the DVDs, so that I am both able to watch them individually with VLC as well as edit them together in FCP or DVDSP.
Thanks,
Don

Don
You do need to use separate video and audio files, and Streamclip can do it right (I never used Cinematize!).
And can it work with AC3 as well as WAV and AIFF
You can use AIFF (uncompressed) audio and/or Dolby AC3. If you can try using AC3 audio in your DVD-R projects because first, it takes less space that AIFF (using AC3 you can fit 120 min of high quality video in a 4.7 disc) and second, because it has a lower bitrate. Using AIFF is a very common cause of formatting errors and playback problems, because highbitrate errors.
I have yet not used DVDSP, so I'm not familiar with the process.
You can visit [Drew13's site|http://www.dvdstepbystep.com> for some good tutorials.
Hope that helps !
Alberto

Installing a new hard drive. How to make installer dvd from current OS

I have a iMac G5 (PPC). 2004 when I got it. And have the original HD. 150 GB. Following Murphy's Law this HD is due for failure. I have bought a 1 TB. new hard drive to install on this machine. I forgot which OS came with it (10.3) I think. My set up is that I back up my iMac G5 (PPC) to a external Hard drive (300GB) with Time Machine. I have updated thru software update to 10.5.8. But have no DVD installer for 10.5.8.
How can I make an installer for my new hard drive? Or should I partition new 1TB hard drive with the same amount of space as my time machine back up? I may not put everything on current system on new drive.

If the old harddrive is working, why don't you copy the old to the new?
In Leopard, you can resize partitions without loosing data.
Here are two utilities for making a complete backup of your internal hard drive. I've recommend using one of these so that you can create a bootable system on your external hard drive. ( PPC require a firewire connected drive. ) Once created, you can run your system from the external drive. Hold down the option key on your keyboard then power on your machine. This will bring you in startup manager click on the drive image you wish to boot then click on the arrow key to the right.
"Clone, synchronize, backup. Schedule and forget it."
http://www.bombich.com/software/ccc.html
"SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless."
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

How to make a DVD from non-commercial DVD

I belong to a choir and we have a DVD someone made for us to use in presentations to civic groups. How can I make a copy so more than one person can use it for our presentations? Sorry, I didn't find another thread on this? I do have Toast.......do I need it? Thanks in advance Janieg

I found another thread and Beverly gave the article that solved my problem. Thanks, Beverly

How to make recovery dvd from original lion

hi
i buyed the new macbook pro with lion software 1- why there is no cd comes withet 2-how can i make a recovery cd 3- why lion is not at list of purched software at apple store if apple sale the hardware with that
tanks

Computers that now come with Lion pre-installed do not require a disc. They would be restored via the Internet Recovery system: OS X Lion- About Lion Recovery. You can create an emergency Recovery HD volume on a USB flash drive using the OS X Lion: About Lion Recovery Disk Assistant.
It is possible to make a bootable installer but the process is a bit involved:
Downloading Hardware Specific Lion Installers will enable you to get a copy of the Lion installer application from which you can make a bootable Lion installer on an 8 GB USB flash drive:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

How to make a movie from my projects

How do I take my IMovie Projects into one movie on a dvd

Hi mcanovas - Simply duplicate the picture as many times as needed. In the Photos pane you can extend the pic to 30 seconds, so duplicate that 16 times and there you go!
I hope the audience will stay focused

PLZ HELP.. How can i make dvd from FCP project..

Can someone plz help..
I have FCPPRHD and DVD Pro..
I got lost trying to make a dvd out of fcp project
Can someone plz help in easy 123.. steps how to make a dvd for my client to view..
Thnx ever so much
awaitng ur reply

I don't want to sound too harsh, but you really need to read the manual and do the tutorials.
You shoot, capture and edit in FCP. You export that to MPEG2 using compressor and you import the resulting video and audio files into DVDSP. You add a menu and set up buttons to get to the footage, and you set up navigation so that your client can get back to the menu at any time. You build and format that (i.e. burn the disc).
That's the process, but it is very much more detailed than any of us could write here.... it's all in the manual and tutorials

I have the new retina MacBook Pro. I made an iMovie but there's no idvd. How do I make a dvd from my iMovie?

I have the new retina MacBook Pro. I made an iMovie but there's no idvd. How do I make a dvd from my iMovie?

Apple no longer sells iDvd. You will have to purchase an older version of iLife that has iDvd on it or use a third party application such as Toast from Roxio.
Ciao.

How do i burn dvd from iMovie

How do I burn dvd from iMovie. iMac has yesomite installed.

Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

How to make bootable iso from download

how to make bootable iso from download

This one - https://www.microsoft.com/en-us/download/details.aspx?id=5587
1st: This is NOT a .ISO file!!
2nd. It is a .MSI file which is a Microsoft Installer file.
3rd: Read the instructions:
Install Instructions:
Click the Download button to start the download.
Do one of the following:
To start the installation immediately, click Run.
To save the download to your computer for installation at a later time, click
Save.
To cancel the installation, click Cancel.
When installation completes a file called readme.txt will open to provide instructions for burning a home computer restore CD. The file is also located
next to the ISO image file for later reference.
4th: If you are unable to read and follow instructions, there is nothing anyone in these forums can do to assist you. You must be capable of reading and following instructions!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
OK, well sorry to disagree with you but:-
1. Using windows 7, the download does not provide a save but only a run option.
2. In the MS predownload instructions you copied it refers to the readme text next to "the ISO image"
3. This is a copy of the read me file attached:-
"This ReadMe document is one of the Windows Home Server Home Computer Restore CD files. Unless you changed the installation location during setup, the Home Computer Restore CD files and license terms are located in one of the following folders:
* On Windows Vista: %HOMEPATH%\Documents\Windows Home Server Home Computer Restore CD (Dual Boot)
* On Windows XP: %HOMEPATH%\My Documents\Windows Home Server Home Computer Restore CD (Dual Boot)
To use the Home Computer Restore CD software, you must write the ISO image file (restorecd_dual.iso) to a blank CD. A CD/DVD burner is required to write
the ISO image file to the CD. Usually a CD/DVD burner includes the software that you need to write ISO image files. Follow the instructions with your burner software, and then select the option to write an ISO image, not the option to write
individual files. Note that you cannot write the ISO image by using Windows Explorer to copy the file to the CD-ROM drive.
Burning the ISO image creates a bootable CD. To restore your home computer, boot the computer from the CD and follow the instructions.
Microsoft may update the Windows Home Server Home Computer Restore CD software. You can download the latest version from the Microsoft Web site at http://go.microsoft.com/fwlink/?LinkID=109282.
If you want to review the license terms for the Windows Home Server Home Computer Restore CD, the file EULA_DUAL.TXT can be found in the same folder"
As you will see it refers to the downloaded .iso file. Nowhere is there a reference to a msi. As there was only a run function on the downloaded file, it could not be saved. How is an ordinary Windows user meant to interpret the instructs
if the download function does not work? What you do is try and follow the instructions and produce a load of frigging coffee mats, as it seems did many of the posters on this thread. Are we all illiterate?
If Microsoft could think in the way of a user it would help a lot of people.
So Rick Dee, please inform me how I misread the instructions?

How to make data flow from one application to other in BPEL.

Hi All,
I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
Experience people please guide.
Sales Person -----> Sales Manager ----> Production Manager
Thanks
Yatan

Yes you can do this.
If you each integration point to be in different process, you have to create three BPEL process.
1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
-Ramana.

How do I download DVDs from home onto my iPad?

How do I download DVDs from home onto my iPad?

I would suggest that you use a tool like Handbrake to convert the DVD to MP4 video suitable form for putting out your iPad.
Rules governing the use of such tools and so on vary around the world, so you should be knowledgable about your own local copyright laws. In WIPO signatory countries like the USA, you are permitted to "format shift" media that you own for backup, personal uses, and interoperability reasons. However, in the USA, it's a crime to possess the means to do so if that tool could be used to circumvent any technical measure that makes it inconvenient to copy the content. So, Handbrake operates in a gray area as far as US laws are concerned. Outside the US, there ought not be a problem.

OSB : How can we copy actions from one project folder to other projects?

How can we copy actions from one project folder to other projects in OSB?
For eg:
I have a service call out action in Project1/proxySer1
I want to copy this to Project2/proxySer2.
Espicially, in our case error handling callout is common to all of our projects and we should be able to copy from one to another.
Edited by: user10367892 on Aug 20, 2009 12:28 PM

Thank you for the reply.
It was my fault. I was on two different servers, while i was doing this and so didn't work. But copy /past action works as you suggested.
Can I select multiple actions from one stage and paste to different proxy service? I have too many options to copy/paste and hence I have this question.
Is there any other way of copying all selected actions in one stage to another, but not the complete stage itselft?

How to make a DVD 5 from a project?

Similar Messages

Maybe you are looking for