How to make a fairly simple keyword structure for a amateur shooter?

Hi,
I am trying to find a clever way of keywording my images, and have found the hierarchy that comes standard with Aperture to be unsuitable for my needs.
I was hoping to share some ideas on how to build a suitable general structure for someone (amateur) that may end up shooting pictures of almost anything. Once again - I am looking for a fairly simple structure that I might actually end up using and not the pro huge hierarchies that some pro shooters use.
So far, I have identified 3 main questions that I think keywords should answer:
1. What (description of situation)
2. Where (location, as spesific as possible, even if some off my photos has got gps data in them)
3. Who (names, but also classified into family, friends, collegues, anonymous)
Elabourating on this list, the next branch could perhaps be:
1.What
1.1
1.2 ?
1.3 ?
1.4 ...
Some ideas on categories here are: Work/Leisure, arts/crafts,
2. Where
2.1 Country
2.2 County
2.3 District
2.4 Place/location
3. Who
3.1 Family
3.2 Friends
3.3 Collegues
3.4 Anonymous
I would love input on this topic and I would also like the hierarchy be expandable.
Would also love to know where I can find more information on this topic for amateurs like myself.
Best regards,
Kjell Are Refsvik

An intensity graph is just a 2D array. All you need is initialize a 2D integer array of sufficient size and keep it in a shift register. Increment elements based on the xy coordinates.
For some ideas, have a look at this old example.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

How to make an app a file receiver for images on iOS?

Hi,
How to make an app a file receiver for images on iOS?
I did it for the Android app.xml like this:
<intent-filter>
        <action android:name="android.intent.action.SEND"/>
        <category android:name="android.intent.category.DEFAULT"/>
        <data android:mimeType="text/plain"/>
    <data android:mimeType="image/jpg"/>
    <data android:mimeType="image/jpeg"/>
    <data android:mimeType="image/png"/>
    <data android:mimeType="image/gif"/>
</intent-filter>
How to do it for iOS?
(I'm using Adobe Air 4.0)
Thank you!

What app have you used to create your ibook? Normally any app will have a menu item like File > Export that will give you the option of PDF, or you can use Print and there will be an option in the Print dialogue to Print to PDF.

How to make cell editable alv in WebDynpro for ABAP?

I make Column editable ALV.(See under source code)
But I can't make Cell editable ALV.
How to make Cell editable ALV in WebDynpro for ABAP?
and..how to get changed data?
DATA: l_value TYPE REF TO cl_salv_wd_config_table.
l_value = l_ref_interfacecontroller->get_model( ).
* { EDITABLE
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lr_input_field     TYPE REF TO cl_salv_wd_uie_input_field,
        lr_column          TYPE REF TO cl_salv_wd_column.
lr_column_settings ?= l_value.
lr_column = lr_column_settings->get_column( 'TOTAL_COUNT' ).
CREATE OBJECT lr_input_field
    EXPORTING
      value_fieldname = 'TOTAL_COUNT'.
lr_column->set_cell_editor( lr_input_field ).
DATA: lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= l_value.
lr_table_settings->set_read_only( abap_false ).

the code seems to be correct....but where are you writing it?
put the code in the wddoinit method and it should work.
have a look at this article..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3133474a-0801-0010-d692-81827814a5a1

How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

you need to "Get Info" on the file first. Select it, right click and select 'Get Info' in the menu.
In the window that pops up, near the bottom, the "Open With" drop down menu needs changed. If the drop down menu does not present the one you want, select "Other" and find it.

How to make dyn/admin not to prompt for username and password?

Hello all
How to make dyn/admin not to prompt for username and password? I am writing a selenium job to automate cache invalidation to load test a production issue we are facing. Selenium is opening a fresh firefox session and prompting for username and password every time. I am also trying to modify my script such that it will use the same session again and not prompt for username and password. But I thought of asking this question in the group.
Your inputs will help a lot.
Thanks,
Sundar

Hi,
You can set enabled property of /atg/dynamo/servlet/adminpipeline/AuthenticationServlet/ to false. It will not prompt for authentication.
Gopi

How to create a simple File structure for a large project?

Hi to all,
I've own and operated my own website design/development (a 1 woman office, plus many sub-contractors) over the period of 8 years. I started hand-coding HTML sites in 1997, before the creation DW (though I think the first ver was for Mac in '97). Over the recent years I've udated my skills to include CSS and enough Java/PHP to customize and/or troubleshoot current projects (learn as I go).
The majority of my clients have been other 1-10 person entrepreneur companies. I've recently won a bid to redesign a government site which consist of 30 departments, including their main site.
The purpose of this thread is to get some ideas on creating a file management/structure. Creating file management setup for smaller companies was a piece of cake, using a simple file mgmt structure within DW. Their current file structure is all over the place. I've read about a very good, simple file struture in a DW CS4 manual and wanted to get feedback on different methods that have worked, and have not worked, or your client:
Here's my thinking:
1. within the root dir place home.htm and perhaps a few .htm related only to home
    2. create the following folders off the root, "docs, imgs/global, CSS, FLA, Departments"
            - sub folders within docs for each dept
            - site wide css's placed into CSS
            - site wide FLAs into the FLA
            - sub-folders created within 'imgs' for each dept, including a 'global folder' for sitewide images and menu imgs (if needed)
- OR -
1. create same file structure for each dept folder, such as 'imgs/CSS/FLA/Docs'
Open for suggestions....
Ciao

It is a problem I have thought over at length and still feel what I use could be better. You are doing it the right way around researching before you start, as moving files once things are underway can course real problems. One issue is the use of similar assets across site(s), and version control if you have multiple versions of the same asset.
Can not say I have built a site(s) of that size but would recommend putting together a flow chart to help visualise the structure and find out better ways organising (works for me). Good luck, post back with your solution.

How to make "Levels" in simple java game

I just wanted to know if anybody knew how to make "Levels" in a java game. In my case, it is to change two polygons that are used in the background. I think you have to use an array of some kind, but i dont really know.
Here is my source, the polygons are by the massive ///////// areas.
I cut out the majority of the program, because it was too long.
public class collision extends Applet implements MouseListener,MouseMotionListener
    private Image rickImage,mazeImage;
   Image Buffer;
   Graphics gBuffer;
   int x, y;
   int[] LeftWallX = {0,204,204,149,149,162,162,243,260,235,259,232,260,230,207,207,0};
   int[] LeftWallY = {500,499,402,402,341,324,227,191,157,141,135,123,116,109,86,1,1};
   //int[] PlayAreaX = {204,204,149,149,162,162,243,260,235,259,232,260,230,207,207,263,263,245,282,262,274,257,273,250,184,184,170,170,208,216,216};
// int[] PlayAreaY = {499,402,402,341,324,227,191,157,141,135,123,116,109,86,1,1,86,103,115,129,138,147,155,201,230,323,340,384,384,402,499};
   int[] RightWallX = {500,500,263,263,245,282,262,274,257,273,250,184,184,170,170,208,216,216};
   int[] RightWallY = {500,0,1,86,103,115,129,138,147,155,201,230,323,340,384,384,402,499};
   boolean mouseInside, collide;
   boolean rolled = false;
   boolean msg = true;
   int sX=204,sY=490,sW=12,sH=9;
   //Declare the rectangles
   Rectangle movingRect,finshBloc,startBloc,oopsBloc;
   //Declare the polygons
   Polygon leftWall,playerArea,rightWall;
        ///Initiate
        public void init()
             rickImage = getImage(getDocumentBase(), "rick.jpg");
             mazeImage = getImage(getDocumentBase(), "maze1.jpg");
             collide=false;
             Buffer=createImage(getSize().width,getSize().height);
             gBuffer=Buffer.getGraphics();
             rightWall=new Polygon(RightWallX,RightWallY,18);
             playerArea= new Polygon(PlayAreaX,PlayAreaY,31);
             leftWall= new Polygon(LeftWallX,LeftWallY,17);
        public void paint(Graphics g)
             drawStuff();
             g.drawImage (Buffer,0,0, this);
*/

I'm not exactly sure in your case what you are trying to accomplish. If all you want to do is make new polygons for your levels then you will simply need a Vector of type level (or polygon). Store multiple levels/polygons in that vector. This can be done many ways, probably the most efficient way would be to create a class Level of sorts and create each level object from there. This way you have all your levels stored into that vector.
I have made programs where the levels/mazes are randomly generated based on certain parameters (this way you would not need to define any specific level). This can be done inside the Level class and added to the vector so that when a level is randomly generated there are literally infinite possibilities. I would suggest posting all your code or at least a breakdown UML diagram of what is going on in your entire program.

How to make a custom template the default for Apple Mail (10.7.5)?

Hi,
I'm OK with making a new custom template in Apple Mail. It shows up fine once under "custom" in the stationary pane (and once I take off signature in a new email). But... that's a lot of trouble to go through everytime I want to send an email.
So the question is: can I make my custom template my default for all my emails, unless I want to manually change it? Seems like this should be possible but I can't figure it out and haven't run into any solutions (only on how to make a template).
Do I really have to select it each time?
Best,
Joel

As an FYI: I just solved the problem by going the "low road." I'll be a bit laborious in case someone else wants a solution at a later date (I know I Googled the topic and found nothing). I experimented by simply:
Opening a new email message
Selecting my custom template
Copying the custom signature (Select All)
Opening another new email message
Selecting Edit on the Signature pulldown menu
Hitting the plus symbol to create/add a new signature in the pane
Pasting into the new signature
Naming it
Selecting "Choose signature" at the bottom of the signatures pane
And violà!!
It now appears as a possible selection *and* as the default.
Better yet - it is now my default and will work as a reply to an email.
I think I got it all right in the list above.
OK, granted, this is a pretty simply signature - a list of my website, SoundCloud, twitter etc with those names in bold and a graphic of my color logo - but... it works! YMMV.
Give it to Apple to make it so simple that any fool could do it (that would be me), you wouldn't need a "specialized" app, and - of course - there wouldn't even be instructions on how to do it!
Best,
Joel

How to make a really basic pong game for a beginner

Hello. I've read through a couple of threads on here dealing with making a game of pong in LabView, but in them the users had questions with far more complex aspects of the program than I want to deal with. I am a beginner programmer in LabView with limited experience in Java and Visual Basic programming. I was tasked with creating a game over winter break, and now that I finally have some time (this weekend that is), I decided that I'd make a really simple game of pong. However, I have seriously overestimated the difficulty of this for a beginner who has very limited knowledge of Lab View.
I ask you to please have some patience with me.
I know what I want to do, and just need help inplementing it.
Here is the idea for my design to keep it as simple as possible:
-Create a field (I am not sure what to use for this, but from my reading it appears that some sort of a picture output is needed, but I cannot find that anywhere).
-Set up some simple function that can output the dimensions of this field to use with collision tracking.
-Create a ball that can be tracked by the program.
-From my reading I understand that the simplest way to "bounce" the ball off the sides appears to simply reverse the X velocity of the ball when it strikes the vertical boundaries and the Y velocity when it strikes the horizontal boundaries.
-Insert some sort of a "paddle" that the user can control with the left and right arrow keys.
Now, as I have mentioned I am a beginner with approximately one month maximum knowledge of this software, spread over about a year. I want to take things slow. So for starters, would anyone be willing to walk me through creating a visual output for this and creating a ball that will bounce off all sides?
If I can at least get that far for now, then I can move on (with help I hope!) of inserting an interactive interface for the "paddle."
I have found some LabView code for a simple game like this, but it also includes a score keeping loop as well as an "automatic play" option, and I am attempting to wade through all that code to find the bones of it to help me with this, but due to my inexperience, this might thake a lot of time.
I thank you for any and all help anyone may be able to provide.

EchoWolf wrote:
-Create a field (I am not sure what to use for this, but from my reading it appears that some sort of a picture output is needed, but I cannot find that anywhere).
Wel, there is the picture indicator in the picture palette. In newer versions it's called "2D picture". The palettes have a search function. Using the palette search function is a basic LabVIEW skill that you should know. If you've seen the example for the other discussion, it uses a 2D boolean array indicator. The boolean array is only recommended for a monochrome very low resolution display.
EchoWolf wrote: -Set up some simple function that can output the dimensions of this field to use with collision tracking.
-Create a ball that can be tracked by the program.
That seems backwards. Properly programmed, the code always knows the dimension and the ball position. The program generates, (not tracks!) the ball movement. Of course you need to do some range checking on the ball position to see when it collides with the walls.
EchoWolf wrote:
-From my reading I understand that the simplest way to "bounce" the ball off the sides appears to simply reverse the X velocity of the ball when it strikes the vertical boundaries and the Y velocity when it strikes the horizontal boundaries.
Of course you could make it more realistic by keeping track of three ball parameters: x, y, spin.
EchoWolf wrote:
-Insert some sort of a "paddle" that the user can control with the left and right arrow keys.
Pong is typically played with the up-down arrow keys.
EchoWolf wrote:
Now, as I have mentioned I am a beginner with approximately one month maximum knowledge of this software, spread over about a year.
LabVIEW knowledge is not measured in time units. What did you do during that month? Did you attend some lectures, study tutorials, wrote some programs?
EchoWolf wrote:
So for starters, would anyone be willing to walk me through creating a visual output for this and creating a ball that will bounce off all sides?
I have found some LabView code for a simple game like this, but it also includes a score keeping loop as well as an "automatic play" option, and I am attempting to wade through all that code to find the bones of it to help me with this, but due to my inexperience, this might thake a lot of time.
Start with the posted example and delete all the controls and indicators that you don't want, then surgically remove all code with broken wires.
Alternatively, start from scratch: Create your playing field. Easiest would be a 2D classic boolean array that is all false. Use initialize array to make it once. Now use a loop to show the ball as a function of time.
Start with a random ball position. to display it, turn one of the array elements true before wiring to the array indicator using replace array subset.
Keep a shift register with xy positions and xy velocities and update the positions as a function of the velocities with each iteration of the loop. Do range checking and reverse the velocieis when a edge is encountered.
What LabVIEW version do you have?
LabVIEW Champion . Do more with less code and in less time .

HOW TO MAKE A REVERSE VIDEO IN IMOVIE FOR IOS

I woud like to know, if possible, in how to make a reverse video in my IPad.
Thanks to everyone!
G'day.

Searched for a solution and I found a video tutorial about this:
http://www.imoviehowto.com/imovie-ios-8-how-to-reverse-a-video-clip/

How to make a tabbed panel in fireworks for a web page?

I know fireworks is not the best place to make a web page. I have to use this because it is a mockup for school. i have the tabs up and each state made in each tab i have the appropriate tab merging with the content area. I also have 3 other states I have created for each tab. first problem i am having is that when I click on state 2,3 and 4 I my content disappears including my master page and all of my other content I don't know how to make it show like it does in state 1. my second problem is I don't want to slice the hotspots to make the tabs. I just want to make the hotspots navigate to each state is that at all possible? or do I just have to slice it? the reason I don't want to slice is because the instructor does not like it when we slice content don't ask me why.

Searched for a solution and I found a video tutorial about this:
http://www.imoviehowto.com/imovie-ios-8-how-to-reverse-a-video-clip/

How to make plant in shipping cond tab for line item in sales doc mandatory

Hi
How to make plant as mandatory for a sales document say quotation mandatory ? I went to SPRO-> Basic Fucntion - > log of incomplete terms -> Define incomplete Groups -> B.selected sales -Item -> Created new procedure Z001 with fielda VBAP - WERKS ,selected screen name PDE2 and checked warning check box.
When i goto Assign incompleteness procedures I donot have option to assign it sales document item level procedure i will only get sales doc header procedure to assign it to document type quotation.
How to make plant as mandatory for each line item in quotation?
Thanks,
Vaishnavi

Include: MV45AFZB
Form USEREXIT_CHECK_VBAP
In our business scenario, we have used the same ,But Plant is mandatory only for 1st line item-
source code:
IF vbak-vkorg = '1000' OR vbak-vkorg = '2000'.
    IF sy-tcode = 'VA31' OR
       sy-tcode = 'VA11' OR
       sy-tcode = 'VA21' OR
       sy-tcode = 'VA41' OR
       sy-tcode = 'VA01' .
      IF vbap-werks IS INITIAL AND
         vbap-posnr EQ '000010'.
        MESSAGE e398(00) WITH 'Please enter the plant for first line'.
      ENDIF.
    ENDIF.
ENDIF.
Help:
Through this form exit we are making the "plant' field (for the ist &*
& line item ) mandatory for the sales document . This interns helps us &
& to create the sales document numner according to the plant (Region) &
*& of the Plant
Hope it clears. take assistance of your ABAPer.

How to make a pdf editable and save for print

Hi,
I just joined Adobe Cloud and it's been a while since I have used acrobat. I have made a brochure that I need a couple of things to be editable on. See below. I need the two areas highlighted in red to be editable for different locales/people. My questions are:
A) I assume Acrobat is the way to do this. I also have FormsCentral if that works better. Can someone tell me how to make these two fields editable?
B) What program do they edit with? Acrobat Reader?
C) How do they save and output it for print?
Thank you,
John

This is not about what Acrobat can or can't do - and you just said they won't have it anyway. It's about the limitations of PDF. A proper solution is to develop (at some expense) a server side PDF generator that takes the user's input and makes them a custom PDF. I don't know if you can just subscribe to a service to do this. If you aren't going to have them use Acrobat, form fields are your only option. Be sure they (and you) understand the limitations and that they must use Reader (not one of the many other PDF viewers). Be sure you understand about reader enabling: many versions of Reader CANNOT SAVE filled in files unless they are specially prepared.
So back to your original question: how do you make the fields editable: with the Forms function in Acrobat. You may have better luck in the Acrobat Forms forum.

How to make a copy of DefaultStyledDocument Object for RTF text ?

Hi All,
In my application, I need to copy RTF text from Org_Default_Styled_Document to New_Default_Styled_Document (both are independent objects.)
For this I wrote the below method :
public DefaultStyledDocument copyRTFStyledDocument(DefaultStyledDocument Org_Default_Styled_Document)
          DefaultStyledDocument New_Default_Styled_Document = null;
          try
                        // writing RTF byte[] to output stream.
               ByteArrayOutputStream bOData = new ByteArrayOutputStream();
               rtfKitEditor.write(bOData, Org_Default_Styled_Document, 0, Org_Default_Styled_Document.getLength());
                        // reading RTF byte[] from input stream.
               ByteArrayInputStream bIData = new ByteArrayInputStream(bOData.toByteArray());
               New_Default_Styled_Document = new DefaultStyledDocument();
               rtfKitEditor.read(bIData, New_Default_Styled_Document, 0);
          } catch(BadLocationException e)   {
            e.printStackTrace();
          catch(IOException e)        {
            e.printStackTrace();
       return New_Default_Styled_Document;
}I am able to see an extra 'enter' character (i.e, "\n") added to New_Default_Styled_Document.
I tried to figure out the problem by digging API classes like RTFEditorKit.java and RTFGenerator.java, I observed that an extra 'enter' character is adding at the below method of RTFGenerator.java
public void writeRTFTrailer()
    throws IOException
    writeEndgroup();
    writeLineBreak();
public void writeLineBreak()
    throws IOException
    writeRawString("\n");
    afterKeyword = false;
}I used
New_Default_Styled_Document.remove(Org_Default_Styled_Document_Length, 1); to remove the extra 'enter character from New_Default_Styled_Document every time. Its workaround only.
Can any one please help me how to make a new copy / clone of DefaultStyledDocument ? Is there any alternate solution which does not add any extra character when we make a copy of DefaultStyledDocument ?
Its very urgent. I am trying a lot.
Thanks in advance
Satya.

You will need to define an Organization hierarchy.
1. Define your company as a Business Group and define the 3 child companies as Organizations (HR Organizations).
2. Define Organization Hierarchy with 3 child organizations as child of the Business Group. You can further add organizations as childs to those three in the hierarchy.
3. Define 3 security profiles (Security > Profile) marking View Employees / Contingent workers / Applications / Contacts as restricted. Click in the Organization Security tab. Select the option of Secure by Organization hierarchy option. Click in Organization hierarchy and select the one defined in step 2. Click in top Organization and select Company 1 / 2 /3 for each of the Security Profile. Check the box Include Top Organization. Also select the check box Restrict on Individual assignments option. Save the security profile(s).
4. Define 3 HR Responsibilities (e.g. Company 1 HR, Company 2 HR, Company 3 HR). Using system profile HR:Security Profile, attach corresponding security profile to each of the responsibilities. Profile value of HR: Business Group is same for all the responsibilities.
5. Run the Concurrent Program "Security List Maintenance" for each of the security profile.
From now, One responsibility can not view data from another Organization and its child Orgs.

How to make a fairly simple keyword structure for a amateur shooter?

Similar Messages

Maybe you are looking for