How to make a field default in mm01 while coping from other material

hi all,
i want to make a field default in mm01 ....mara-mstae -
say value 'A', when
i am coping from other material.
normally a T.variant is working in the scenario when im creating a material
but not when i am coping from other material.
Any field exits would work on that .if so how?
thanks in advance,\
sg

i have to make the x-plant material status as 'BE' in mm01 basic view 1 ,when the material is created or copied from .<b>but it should be only default for the user might change it</b>
now when the material was created its workin---- coz a transaction variant has been created.
but when im coping it from other material its picking the properties of the old material ( from which im coping) ..not the field value which i want to display as default.
field exit only validates. can we give default value by it ,before saving a material??????
thanks,
sg

Similar Messages

How to make slicer to remember selected values while moving from report to another

I have Power View on SharePoint 2013 and OLAP Cube on SQL Server 2014 solution.
1) I select slicer values and graphs are updated
2) I move to next page on same Power View file and use slicers.
3) I come back to original reports. My slicer valuers are empty.
Is it possible to make slicer to remember selected values while browsing from reports to another?
Ken
Kenny_I

Hi Kenny_I,
This seems to a by design issue. The selected values within a slicer will be stored in Memory. When we go to another report, the memory will be released.
Best Regards,
Black

How to make a field under Selection column in DataSource from dimmed to ...

We try to make an InfoObject shows up in Data Selection of an InfoPackage to restrict the data load based on the range of this InfoObject. In order to do this, we will have to go to the source system to run RSA6 to edit the datasource to make this field checked under the Selection column. However when we get to the screen, find this field's Selection column is dimmed. Is there anyway to make it from dimmed to editable that it can be checked?
Thanks

hi Kevin,
try to check table ROOSFIELD, fill OLTPSOURCE with your datasource name and OBJVERS 'A', what's the value for SELECTION ? you may change the value with 'X'.
use abap code :
UPDATE ROOSFIELD SET SELECTION = 'X'
WHERE OLTPSOURCE = 'datasource name' AND OBJVERS = 'A'.
can i know your datasource name (if it's business content) ?
Properties of a DataSource Field
If a request for a DataSource is scheduled in the Business Information Warehouse, selection conditions are specified across certain fields. The property that determines whether a selection in BW using a field
is possible or required is established in the DataSource in the Source System.
In addition, the visibility of the field in BW can be set.
A field that is not visible (or that is hidden) cannot be transferred into the transfer structure.
Definition of the individual values:
'A': Field is hidden in OLTP and BW, property cannot be changed the customer.
'M': The DataSource requires a selection across this field before it is able to extract data (Required field for the generation of a request); property cannot be changed by the customer
'X': The Data Source can select across this field. The customer can change selections and visibility (the field is currently visible and selectable, compare with 'P', '3')
'1': Pure selection field for the DataSource. The customer can change the selection, but not the visibility (the field is currently selectable , compare with '2').
'2': Pure selection field for the DataSource. The customer can change the selection, but not the visibility (field is currently no selectable, compare with '1').
'3': The DataSource can select across this field. The customer can change selection and visibility (the field is currently not visible not selectable, compare with 'P', 'X')
'4': The DataSource cannot select across this field. The customer can change visibility (the field is currently not visible, compare with ' ')

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How to make a field in adobe form noneditable

how to make a field in adobe form noneditable. like info keys..
when this form is sent through worflow the receiver shudnt be able make changes to the field value...(I have a form, which has fields prefilled(like pernr employee name) but these fields are in editable able..(i want only some fields to be uneditable not all)
Edited by: kumar gaurav on Apr 11, 2008 8:04 AM

Hi,
You can make fields non-editable at runtime using this code:
field.access = "readOnly"
Hope this helps.
Amit

How to make a field Mandatory in a Table view?

How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.G

Hi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM

How to make a field mandatory in billing

How to make a field mandatory in billing document,if m right with the help of incomplition log but how.....
plz reply the full configuration.

Hi Mohan,
We normally create a billing document with reference any other document say Order or delivery.
so, all the necessary information in the invoice will be taken from preceeding doucments. Thats way in the order level we check for incompletion log. If any important data is missing in the order level then the succeding documents will not be created.
Thats way in the billing documents all the necessary information will come automatically either from preceeding documents or from master data.
Still you want to make any field mandatory, you can do these by modifieing Billing documents user exists,you can make which ever the fields are mandatory and to be checked before saving. so when you are going to save the invoice, it will check if these fields are maintained or not.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen

How to make a field required in OAFramework

How to make a field required in OAFramework at runtime?? Please explain in detail if possible.
Thanks
Kumar

Get the handle of the bean using the following Code
<BeanType> bean = <BeanType>webBean.findIndexedChildRecursive("<Id of bean>");
if(bean!=null && <condition>)
bean.setRequired(true);
}

How to make all fields mandatory in sales order T- code VA01 initial screen

Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar Reddy

Hi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad

How to make a field profit center mandatory in sales order?

Dear GURUS,
Please help in getting answer for following question.
How to make a field profit center mandatory in sales order?
With Regards
Sandeep D.

Hi,
There are 2 ways to make profit center mandatory
1.Transaction Variant
2.Incompletion procedure
1.Transaction Variant
Step 1:Goto Tcode shd0 and input transaction as va01 and give name of transaction variant as ( example. zva01 ) and click on create or F5
Step 2.Then it takes you to sales order screen.Just click on enter untill you see profit center field.
Step 3.check the box required against profit center.
Step 4.click on save ( under a package name or as local object ) and exit
Step 5.Assign transaction variant to your sales order type through tcode v0v8.
2.Incompletion Procedure
You can add the field table-vbap,field- prctr,status-04,check-warning to your existing incompletion procedure Tcode- ova2 assigned to your order type in tcode vov8 and check the box - incomplete messeges for your order type through tcode vov8.
If incompletion procedure is not assigned to your order type than you have to create a new incompletion procedure and assign it to order type.

How to make a field un editable in one screen

Dear Experts,
I want to know how to make one field as un editable in one screen.I will explain in detail. I want to make "Reconciliation account" field as un editable in XD02 t-code.
Regards,
Surendra babu.

Hi Surendra,
Use this path in spro:
Financial Accounting-> A/P&A/R-> CustomerAccounts->MasterData->Preparatons for CreatingCustomerMasterData
use the transactions & u can update for creation of customer master or hange of customer master.
Hope this helps you
Award points if helpful
chaitanya

How to make expandable field in pdf forms?

Does anyone here know how to make expandable field in a PDF form?
I want the field, originally appear to be a 1-liner, to expands when you put in more text and everything that is underneath the expandable field shifts or moves down.
pls help.
Thanks!

No, LiveCycle Designer is not included in Creative Cloud and is available only for Windows. It was included with the Windows version of Acrobat Pro before Acrobat 11 but is now a separate program and about $300.

How to make apple maps default on my mac?

I want apple maps to default on my map, e.g.., when I need to send meeting location address in calendar.

Hi ajjacoby14,
To make iTunes the default application to use for playing music, use the steps found in this article -
iTunes for Windows: How to make iTunes the default application for music and audio files
Thanks for using Apple Support Communities.
Best,
Brett L

How to make a field in selection screen as READ_ONLY !!

Hi,
   How to make a field in selection screen as READ_ONLY !!.
Thanks,
Senthil

This is the code you need to have in your program.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'MYSELFLD'.
    SCREEN-INPUT = 0.
    MODIFY-SCREEN.
ENDIF.
ENDLOOP.

HOW TO MAKE THE FIELDS ON TABLE CONTROL SCREEN FIXED!!

Dear all,
Can you please tell me as to how to make the fields on the table control screen fixed (not respond to the scroll bar) i.e. simillar to MC88 screen , the first two fields are fixed and don't respond to the scroll.
Please Help!!!!
Vj

Hi
In TC, goto attributes and set 'Fixed columns' as 2. This will fix the first 2 columns.
Regards
Navneet

How to make a field default in mm01 while coping from other material

Similar Messages

Maybe you are looking for