How to make a good referencing for my web site

hi. i start with muse and would like to know how to make a good referencing for my web site; thanks for your answers...

Google and search the forum for: SEO or Search Engine Optimisation

Similar Messages

How to make a good UI for channel selection using DAQmx

A lot of my Labview programming was with earlier verisons of labview (pre Labview 7), and there are a ton of new features that I'm trying to digest (currently using Labview 8.2).
My question is (in general terms), how are people programming their UI for selecting channels and such when using DAQmx hardware? What I have in mind is a compacDAQ system with a number of modules. The user would be able to pick and choose which channels to monitor. Using MAX as part of that process seems counter intuative, and somewhat static (yeah I know you can change it there, but it feels more like something you would use for something that really doesn't change much). I'd like all the UI to be within the VI.
Are programmers using the create task VIs for that or something else?
Thanks in advance.
Solved!
Go to Solution.

I wholeheartedly second the motion to keep MAX out of the picture as far as users are concerned.
Setting up UI's for channel selection is a breeze in DAQmx when you create channels on the block diagram. The control you create off the Channels input will populate itself with the inputs that it knows are capable of performing the desired task...
<<< My configuration knows that my Module 5 is capable of doing Analog Input.
So... Just create a panel that waits for the user to select the proper channel. I also run a quick check of the user's selection before creating / starting the task. For example, if they choose ai30 or higher, and I know that the system isn't wired for those inputs, I'll not allow that selection. Also check for using two of the same input, etc.
Richard

How do I get time & date for specific web sites visits from the fire fox history?

how do I get history information for the time and date I went to specific web sites from firefox?

The 'View' menu at the top, select Sidebar > History. At the right top of the sidebar that appears, click "View" button, select "View by date" or "View by date and site".

How to make 1 spry menu for the entire site? but not on each page

i have a website that i wish to have multiple pages available all form the same menu and late and probably at regular intervals add more tabs to the menu
is there a way to create a spry menu speratley that the page some how references, something like a frameset but without using framesets?
im sort of new to webdesigning and unsure of the correct terminology, so i am finding it difficult to look up stuff that i don't know the name for, but will gladly go read someting if you point me in the right direction.
regards
for now
wayne

You can do this with PHP or ColdFusion
These are "server side" scripting languages so you will have to test your website after you upload to you web hosting account.
Or if you set up a local server. Without the local server you will get errors when you open them in firefox.
To use the following what you do is "Cut" the part you want to be on all pages out, "Paste" it into a seperate document and in its place on your page you put one of the following suitable tags.
You will also have to rename your main file to .php or .cfm as opposed to .html
Again, whatever page you put one of these tags on, their extention must change match the type of tag used.
First Method (PHP):
PHP is the more common method -
<?php @ require_once ("yourMenu.html"); ?>
Require_once is basically a safeguard so that you don't add the menu twice onto a page.
This will only work for PHP 4+
This method would work for older versions of php too -
<?php @ include("yourMenu.html"); ?>
Second Method (ColdFusion):
This will only work if your host has ColdFusion installled -
<cfinclude template="bla.html">
eg index.html
<html>
<head>
<title>Stuff</title>
<head>
<body>
<?php @ require_once("SpryMenu.html"); ?>
</body>
</html>
SpryMenu.html
<ul id="menubar1" class="MenuBarHorizontal">
    <li><a class="MenuBarItemSubmenu" href="#">Item 1</a>
        <ul>
            <li><a href="#">Item 1.1</a></li>
</ul>

What is a 'tab'? I want to make an App Tab for a web site I use.

What is a 'tab'?

See:
* https://support.mozilla.com/kb/what-are-app-tabs
* https://support.mozilla.com/kb/what-are-tab-groups
*https://support.mozilla.com/kb/Tabbed+browsing

I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks

I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks
just getting started so I would appreciate some assistance
Mike

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?I have a film in a proyect

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?
I have a film in a proyect made with a miniDV camera in my old Premiere 6.5
It has 68 minutes and after exporting it with the Microsoft DV AVI compressor in 100 % quality and not compressing the audio, it ended in an AVI of 14 Gigas.
I would like to obtain a DVD of the best quality in audio and video possible. How can I do it? SHOULD I EXPORT IT FROM THE PREMIERE 6.5 WITH ANOTHER COMPRESSOR OR IN LESS THAN 100% QUALITY WITH THE SAME DV AVI COMPRESSOR ? my INTENTION IS TO USE THE NERO VISION AFTERWARDS... I HAVE THE NERO VISION 4...-. FROM 2007- WOULD IT BE OK OR IS THERE A BETTER ONE? - I know there are newer ones...but better?
I HAVE POSTED THIS A FEW DAYS AGO. THANKS TO THE PEOPLE THAT REPIED. BUT I THINK MY QUESTION IS NOTFULLY ANSWERED YET.
i NEED THE BEST QUALITY I CAN GET, EVEN WHITH MY PREMIERE 6.5, BECAUSE IT IS A FEATURE FILM THAT TOOK ME SEVERAL YEARS AND THIS LAST REMAKE IS NOW READY AFTER TOO MUCH WORK.
THANKS A LOT !!!!!!!!!!!!!

Hello Thanks for your replys and sorry for being so fussy about this.
I have now seen that one of the options for exporting from Premiere 6.5 is Adobe MPEG encoder. So Do you guys think it would be a good idea to do it with that, Or Would it be better AVI or DV AVI compressor from Premiere before making the DVD?
I have the Nero Vision 4.9.6.6 But I may be able to look for another one if you think it is better...
Thanks a lot for your advises...

How to make a good voip server +applet ?

Here is my applet wich I made http://84.244.8.225/test.html
It works a bit
Here the code:
http://84.244.8.225/javamic4.txt
Any ideas/suggestions to make it better...
(for example how to make a good server (windows) ?)
Thx!
Edited by: FrederikPot on Sep 24, 2007 3:01 PM
Edited by: FrederikPot on Sep 24, 2007 3:03 PM
Edited by: FrederikPot on Sep 24, 2007 3:07 PM

Hello Thanks for your replys and sorry for being so fussy about this.
I have now seen that one of the options for exporting from Premiere 6.5 is Adobe MPEG encoder. So Do you guys think it would be a good idea to do it with that, Or Would it be better AVI or DV AVI compressor from Premiere before making the DVD?
I have the Nero Vision 4.9.6.6 But I may be able to look for another one if you think it is better...
Thanks a lot for your advises...

MOVED: how to make a good flow in the case?

This topic has been moved to Off Topic Technical.
how to make a good flow in the case?

Browser variation is something we must all deal with. For best results, begin projects with a clear idea of what type of layout you need (1-column, 2-column, 3-column or Multi-column grid). Then get a CSS Layout that meets your requirements.
PVII CSS Templates are rock solid & thoroughly tested to perform well in all browsers (commercial product)
http://www.projectseven.com/products/index.htm
CSS Layout Magic (commercial extension for Dreamweaver)
http://www.projectseven.com/products/templates/pagepacks/cssmagic/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to make a loop run for specific period of time ?

hello !
i'm new to labview and could'nt found how to make a loop run for 2 sec for example, and then to exit.
Solved!
Go to Solution.

Hi Hookso,
You can do it using the different loops like While loop and For Loop. Roderic has already stated how to do it using a for loop. I have illustrated in the attached vi how to do it using a while loop and Elapsed Time function. Take a look.
Regards,
Nitzz
(Give kudos to good Answers and Mark it as a Solution if your problem is Solved)
Attachments:
Untitled 2.vi ‏36 KB

Does anyone here know how to make a background soundtrack for a Tai Chi Video?

Good morning,
Does anyone here know how to make a background soundtrack for a Tai Chi Video in Garageband. I have been looking around at the different sounds and music in Garageband but I have not been able to find anything that would go with the video.
Here is an example of a Tai chi video if you were wondering
http://youtu.be/a6pJf2otwv8
I want to create something like this for a video I did for a fitness gym for a Yoga instructor and Tai Chi instructor.
Any tips would be appreciated.

Brandon,
you will not have to do any importing in GarageBand. Intalling Mainstage will extent GarageBands Loop Library and Instruments Library.
After you installed MainStage the additional loops and Instruments will show in GarageBand just like all other Loops. you will simply see more loops.
For example:
or:

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How to make jar files availabe for deployed EJBs

Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar to the
classpath, but I think that shouldn't be the way. Is there somthing in the admin
console to make jars available or do I have to insert it in the ear file? And
if so, where do I hve to place it?
Thanks
Claudia

Put the util.jar in the ear with your ejb jars - at the same level (i.e. in
the root) - but do not include them in the manifest.xml.
Also each ejb jar that refers to util.jar must have util.jar on its internal
classpath in the manifest.
"Claudia" <[email protected]> wrote in message
news:3d537db5$[email protected]..
>
Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar tothe
classpath, but I think that shouldn't be the way. Is there somthing in theadmin
console to make jars available or do I have to insert it in the ear file?And
if so, where do I hve to place it?
Thanks
Claudia

How to make a group contacts for iphone 4s, How to make a group contacts for iphone 4s

How to make a group contacts for iphone 4s

Or there are apps
https://www.google.co.uk/url?sa=t&source=web&cd=3&ved=0CEEQFjAC&url=https%3A%2F% 2Fitunes.apple.com%2Fgb%2Fapp%2Ftext-2-group-fast-sms-imessage%2Fid519077434%3Fm t%3D8&ei=WCkfUc6vE8THtQavlYCoBw&usg=AFQjCNHnoWUqJ9AMYWCadVceOkq-6Ed4Vg

How to make a good referencing for my web site

Similar Messages

Maybe you are looking for