How to make a good voip server +applet ?

Here is my applet wich I made http://84.244.8.225/test.html
It works a bit
Here the code:
http://84.244.8.225/javamic4.txt
Any ideas/suggestions to make it better...
(for example how to make a good server (windows) ?)
Thx!
Edited by: FrederikPot on Sep 24, 2007 3:01 PM
Edited by: FrederikPot on Sep 24, 2007 3:03 PM
Edited by: FrederikPot on Sep 24, 2007 3:07 PM

Hello Thanks for your replys and sorry for being so fussy about this.
I have now seen that one of the options for exporting from Premiere 6.5 is Adobe MPEG encoder. So Do you guys think it would be a good idea to do it with that, Or Would it be better AVI or DV AVI compressor from Premiere before making the DVD?
I have the Nero Vision 4.9.6.6 But I may be able to look for another one if you think it is better...
Thanks a lot for your advises...

Similar Messages

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?I have a film in a proyect

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?
I have a film in a proyect made with a miniDV camera in my old Premiere 6.5
It has 68 minutes and after exporting it with the Microsoft DV AVI compressor in 100 % quality and not compressing the audio, it ended in an AVI of 14 Gigas.
I would like to obtain a DVD of the best quality in audio and video possible. How can I do it? SHOULD I EXPORT IT FROM THE PREMIERE 6.5 WITH ANOTHER COMPRESSOR OR IN LESS THAN 100% QUALITY WITH THE SAME DV AVI COMPRESSOR ? my INTENTION IS TO USE THE NERO VISION AFTERWARDS... I HAVE THE NERO VISION 4...-. FROM 2007- WOULD IT BE OK OR IS THERE A BETTER ONE? - I know there are newer ones...but better?
I HAVE POSTED THIS A FEW DAYS AGO. THANKS TO THE PEOPLE THAT REPIED. BUT I THINK MY QUESTION IS NOTFULLY ANSWERED YET.
i NEED THE BEST QUALITY I CAN GET, EVEN WHITH MY PREMIERE 6.5, BECAUSE IT IS A FEATURE FILM THAT TOOK ME SEVERAL YEARS AND THIS LAST REMAKE IS NOW READY AFTER TOO MUCH WORK.
THANKS A LOT !!!!!!!!!!!!!

Hello Thanks for your replys and sorry for being so fussy about this.
I have now seen that one of the options for exporting from Premiere 6.5 is Adobe MPEG encoder. So Do you guys think it would be a good idea to do it with that, Or Would it be better AVI or DV AVI compressor from Premiere before making the DVD?
I have the Nero Vision 4.9.6.6 But I may be able to look for another one if you think it is better...
Thanks a lot for your advises...

How to make a good referencing for my web site

hi. i start with muse and would like to know how to make a good referencing for my web site; thanks for your answers...

Google and search the forum for: SEO or Search Engine Optimisation

MOVED: how to make a good flow in the case?

This topic has been moved to Off Topic Technical.
how to make a good flow in the case?

Browser variation is something we must all deal with. For best results, begin projects with a clear idea of what type of layout you need (1-column, 2-column, 3-column or Multi-column grid). Then get a CSS Layout that meets your requirements.
PVII CSS Templates are rock solid & thoroughly tested to perform well in all browsers (commercial product)
http://www.projectseven.com/products/index.htm
CSS Layout Magic (commercial extension for Dreamweaver)
http://www.projectseven.com/products/templates/pagepacks/cssmagic/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to make html file on server side from the data entered in text area

Hi!
I want to know how to make .html file on server side. Like if i enter the data in text area ( or like we normaly see when we write mail that editor) and we can use html tages in it and when user submit form all the data in that field will be saved on server side as an html formate. Is it possible to do so??? or any ruff idea how to design it???

Erm ...
Whats the problem with that?!
Ok, here the code ...
String myparameter = request.getParameter("paramname");
String htmltemplate = "<html>\n"
                     +"<head><title>demo</title></head>\n";
                     +"<body>@parametertag@</body>\n";
                     +"<html>";
String htmlpage = htmltemplate.replaceAll("@parametertag@",myparameter);
File yourHTMLfile = new File("wheredoyouwannagotoday.html");
FileOutputStream fos = new FileOutputStream(yourHTMLfile);
fos.write(htmlpage.getBytes());
fos.close();You're done.
Happy Coding! :-) ©

I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks

I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks
just getting started so I would appreciate some assistance
Mike

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

How to make the oracle forms 10g applet or runtime the size of 1024x768?

Hi,
Can anyone tell me
How to make the oracle forms 10g applet or runtime the size of 1024x768?
Thanks in advans..

Please post your question in Forms Topic
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to make a good clone of a Mirror RAID setup?

I have a Mac Mini Server running OS X Server (currently 10.6.8 but I'm in the process of upgrading to 10.8). The 2x500GB disk setup has been turned into two RAID-1 volumes: 400GB for OS X Server (disk2 = disk0s2 and disk0s1) and 100GB for a case sensitive volume that is mounted on /usr/local and which does not play a role in this story. I have a 400GB partition (/dev/disk4s2) on an external disk ready to receive the clone.
I want to make a good copy of the OS X Server disk. I was looking at several options:
dd - When running dd if=/dev/disk0s2 of=/dev/disk4s2, I can calculate that it will take 13 hours. Part of the reason for slow operation: both /disk4s2 and the boot disk for this operation are on the same external FW800 disk. dd if=/dev/disk2 of=/dev/disk4s2 is even slower.
ddrescue - interestingly tells me it needs to copy 9223 PBytes. I don't trust that so much so I stopped
Disk Utility - Select the / volume inside its RAID-1 entry and 'restore' it to a volume created by DU on /dev/disk4s2 (says it will do it in 2 hours, so is now running)
Disk Utility, create a read-only DMG on a volume on the partition reserved for it.
Use CCC (mainly rsync based) or SD commercial tools which operate on the file system level
I'm using the first DU option as that should give me a bootable setup in case of emergency. Did I miss a good option?

CCC would also give you a bootable copy and is the mothod I usually use, however I have also used the Disk Utility 'restore' method as well.

How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?

I have a film in a proyect made with a miniDV camera in my old Premiere 6.5
It has 68 minutes and after exporting it with the Microsoft DV AVI compressor in 100 % quality and not compressing the audio, it ended in an AVI of 14 Gigas.
I would like to obtain a DVD of the best quality in audio and video possible. How can I do it? SHOULD I EXPORT IT FROM THE PREMIERE 6.5 WITH ANOTHER COMPRESSOR OR IN LESS THAN 100% QUALITY WITH THE SAME DV AVI COMPRESSOR ? my INTENTION IS TO USE THE NERO VISION AFTERWARDS... I HAVE THE NERO VISION 4...-. FROM 2007- WOULD IT BE OK OR IS THERE A BETTER ONE? - I know there are newer ones...but better?
OR SHOULD I JUST USE THE ACTUAL 14 GIGA AVI PROJECT AND PUT IT STRAIGHT INTO THE NERO ? I GUESS THIS NERO COMPRESSION SHOULD BE WORST THAN THE ONE THAT THE PREMIERE WOULD MAKE...
Thanks a lot for all the help and advise you could give me !!!!!!!!!!!!!
PS IF IT IS A PROBLEM TO MAKE A GOOD QUALITY 8 GIGA DVD I COULD JUST MAKE A 4 GIGA ONE...

68 minutes DV should fit just nice on a single dvd.
Feed the DV file directly into Nero. Nero will transcode everything for you.
You can also use AME from Premiere 6.5 and export the timeline direct to mpeg2-dvd.
Unfortunately i do not know if Nero is going to re-transcode this mpeg file before burning to dvd.

How to make a good menu!!!

Hi!!!
How can I make a good menu that it executes at runtime? Also this menu has to read a .txt file, which has the user permissions to display the menu according the connect user.
I try to do with javascript, but I don't know to read a file.txt with javascript and to give the parameters to the .java of the page.I have read a lot of manuals of studio creator and javascript and I don't read anything to do this.
I also see that some people do these menus in jsp, but the studio creators jsp code view is in XML, and the tutorial and examples of jsp are in pure jsp with html, so I can't use in studio creator.
Thankssss

I've read about the destruction due to sweat and have been careful where I put the iPod. I'm in the humid deep south, so I have a real concern.
I took it out on a run during a rainstorm on Jan 1, but didn't use the earphones. It only came along so it could record Nike+ data, and it was inside a baggie so it had a better chance of staying dry. It did fine.
My concerns are keeping moisture out of the data port and the headphone jack. Since I've got the Nike+ dongle, it's more difficult for moisture to get in there.
I've only had it in mild weather, minus rain. If it's fair weather, it clips to the front of my shorts off to the side, where I've seen that I tend not to drench my shirt with sweat. I thought of using a wrist strap, but there's been too many times where I've had sweat dripping off my wrists/palms.
Of course, this is way off topic, but I thought I'd give you my opinion.

How to make upgrade from application server and not from central instance?

Hello SAP Gurus!
I have SAP ECC release 6.0, and I´m gonna make upgrade to enhancement package 6.06, do you know if Can I make upgrade from application server, but not from central instance?
Thanks.

Hi Victor,
Upgrade process has to execute from the server where message server is running.
So I guess it is not possible to initiate the SAP upgrade from application server.
Regards,
Deepak Kori

HOW TO MAKE A GOOD BACKUP?

Hi !
I'm fresh in oracle technologies and i've got a question for you:
I want to make a backup of my database and i don't know how to do it - i wrote a lot in internet but i still have same problems.
First:
I want to make backup my database everyday in night. - it may be incremental
I want to make one full backup every week
i don't know what files i need to backup. Let take the situation that my machine is down and i need to make a server one more time - install system (win 2003) and oracle 10.2g -
What next ?
How should I recover now my database?

This question should be posted on the database forums. This is for Oracle Secure Backup product specific questions.

How to make Mac OS X Server auto-configure Airport Extreme port-mapping

Mac OS X Server can automatically configure AirPort Extreme to make services such as iChat, Mail, Web, and VPN accessible: http://www.apple.com/server/macosx/features/networking-vpn.html
I presume this configuration generally takes place during a fresh installation of the server.
Is there any way to re-run this process post-installation?

That page talks about Snow Leopard's Networking abilities, not Leopards.
Off hand, I don't know whether what you describe is a new feature in Snow Leopard or not, but I've never seen Leopard do it (and, to be honest, wouldn't want to).
In either case, it's basically just Bonjour telling the router to configure port forwarding. Given that, I'd start by enabling mod_bonjour in Apache:
#LoadModule bonjour_module libexec/apache2/mod_bonjour.so
but I don't know how other processes are doing it.

How to make a mini mac server work on multiple workstations

I would like to purchase the mini mac server for my 3 boys and set up 3 different workstations (monitor, keyboard, mouse) for each kids.
Can you do this? If so how???

What you are describing is how mini-computers were setup forty or so years ago, and what users were gleefully glad to get rid of when true micro-computers came on the market in the 1970s. In those days the processor and RAM memory were, by far, the most expensive parts of the system costing literally thousands of times more than the keyboards and monitors.
Today the cost of the processor/RAM/Storage have fallen to the point the monitor may be the biggest contributor to total system cost. For example a typical $800 Mac mini coupled to a $1,000 27" Thunderbolt display. The class of system you describe is still around and in use, but generally at a total system cost in the $100,000 range. To make what you are describing work you would need, at a minimum...
A wired or wireless network
One dedicated Mac mini server with installed server application (no mouse, keyboard, or monitor needed)
Three work stations each consisting of an iMac or a Powerbook, or...
one Mac mini
one keyboards
one mouse or trackpad
one monitor
arguably substantial understanding and/or knowledge of the Server application
A recommended alternative would be just the network and three work stations, each operating as a stand alone work station. There isn't room here and I don't have the time to go into all the various combinations and the pros and cons of each, but the recommended alternative would end up costing roughly $1,000 less simply be eliminating the server. It would also be a bit more straightforward to administer.

How to make a good stress test for webapplication

Hi all,
i should test my webapplication.
What's, in your opinion, the best way to make the test, using, maybe JMeter.
In case i use JMeter how can i understand the lines on the graphs; in which way the bandwidth of the client influences the test ?
Does anybody use another kind of web stress tool ?
Cheers.
Stefano

I used JMEter, but I don't use the graph listener...I use the table as well as the tree listener. The table will tell inform me the average and median time it take for the application to finish. It also report to me if the request made was sucessful or not. It also report how long it take for each individual thread to finish the request.
I also use log4j to log any necessary information while running the test
And it's free..so what can you say.

How to make a good voip server +applet ?

Similar Messages

Maybe you are looking for