How to make a Java application that will change the client box's IP address

HI how to make a Java application( that application would be run on the client ) that will change the client box's IP address ( IP address of itself )

If you can do that through the command line, then use Runtime.getRuntime().exec(...) to execute your command.

Similar Messages

How to make a java program that will give you the list of files in the dir

How can you make a program in java that will list all the files in a directory with out useing the File,FileWriter,FileReader,InputStreamReader,FileInputStream,RandomAccessFile etc. classes

What is with these instructors? So far today I have
seen
Do something 100 times, but don't use a loop
Format numbers, but don't use NumberFormat
and now this.
What are these people trying to teach?
Java??? I don't think so.Perhaps it is because these instructors are learning Java at the same time as their students. They are only one chapter ahead of the students. :(

How do I build an application that will run without being installed?

I have seen some of the prior posts on trying to do this, but most of them were older, so I'll ask:
Using 7.1, how do I build an application that will run without having to install the runtime engine? I have a client that wants to run serial port monitoring VIs to watch some custom hardware we built for him. His IT dept. won't let him install anything. If I could make this VI run off of a USB thumb drive without needing anything installed on the system it would be ideal. Space is not a problem, so I could include any runtime files needed. Can anyone tell me how to do this?
Thanks

Under what operating system was it running under back in the 90's when it was working?
I think that starting with NT platforms (applies to 2000 and XP, but not 9x) the hardware abstraction layer (HAL) prevented direct I/O to serial ports. Serial port related code that ran fine on 3.x and 9x would not run under NT platforms without modification.
Just some food for thought, do not know if it applies to your situation.
Good Luck
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

How to make a Java program that recognises a function of two variables...

How to make a Java program that recognises a function of two variables to assign values to that?
First I will give an example and then do the question.
Ex1.
We have any function, eg.y = x ^ 2 + 1 (read 'y' equals 'x' high to the square), a function of the second degree.
To build the graph of this function attach values to 'x' to find the values of 'y'
And thus mount the pair ordered (x, y) which represents a point on the Cartesian plane.
Assigning values to 'x' 'we can build up a table that gives us the pairs ordered:
We can use any numbers, but arfer interval [-3.3]
X | y = x ^ 2 + 1
-3 | Y = (-3) ^ 2 +1 = 10
-2 | Y = (-2) ^ 2 +1 = 5
-1 | Y = (-1) ^ 2 +1 = 2
0 | y = (0) ^ 2 +1 = 1
1 | y = (1) ^ 2 +1 = 2
2 | y = (2) ^ 2 +1 = 5
3 | y = (3) ^ 2 +1 = 10
We then ordered the pairs:
(-3.10), (-2.5); (-1.2), (0,1), (1,2), (2,5), (3,10)
Tabem that can be represented by a table:
X | y
-3 | Y = 10
-2 | Y = 5
-1 | Y = 2
0 | y = 1
1 | y = 2
2 | y = 5
3 | y = 10
Now I begin to explain my doubts.
See this program:
Ex2
* To change this template, choose Tools | Templates
* And open the template in the editor.
Encontrando_o_valor_de_y package;
* @ Author des Soldat Gottes
Import javax.swing.JOptionPane;
Public class (Main
* @ Param args the command line arguments
Public static void main (String [] args) (
Int x, y;
String x1;
X1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',"); / / receives a value for the function y = x + 1
X = Integer.parseInt (x1); / / tranforma String in int
Y = x + 1; / / receives the value of 'x' and calculates' y '
JOptionPane.showMessageDialog (null, "The value of 'y' is: \ t \ t" + y);
/ / Displays the value of 'y'
System.exit (0);
We see that the program receives above a value for 'x' and replaces the function contained in the program, y = x + 1, and so is the value of the variable 'y'.
In: x1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',");
The entry is a number and that number is assigned aa ja existing function in the (y = x + 1).
The question is: would it be possible to come to a function?
Ex: the program ask: DIGITE THE FUNCTION?
The USUARIO DIGITARIA A FUNCTION ANY, TYPE: y = x ^ 2 +1
The program would recognize the function and give numerical values to that function as Ex1, at the beginning of this text.
And then to find the values of the x and y launch a table.
It would be possible that?
By invez of entering with a number so that the program sustitua a function ja existing as Ex2, seen above, entering with a function quaquer (type: y = x ^ 2 +1) for the program atribuisse values to that function and then create a table of values as Ex1.
I hope it has been easier to understand my doubts now.
Thank you for your attention!
God bless!

rafaelmenezes wrote:
Thanks for the explanation, could understand what fly said.
But as it applied to a program?
How to create a program that recognizes that the entry coefficients?Are you asking about how to parse out the coefficients from the string "3x^4 + 4x^3 - 8x^2 + 5x^1 + 2x^0"? If you define the format to strictly follow that example, this should get you started:
Strip out the spaces
Split the String on "x^"
That should give you [3, 4+4, 3-8, 2+5, 1+2, 0]
Split each resulting String on "+ | -", preserving the operator as a token so you can apply the correct sign to the coeff.
That should leave you with [3, 4, +, 4, 3, -, 8, 2, +, 5, 1, +, 2, 0]. Every other number is a coeff, the rest are the degrees.
You can strip out the +, since those coeffs are already positive, and strip out the - after negating the following number. This is all assuming that you have to write this yourself. There is no doubt already a library or 5 out there that does this for you.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

Does anyone know of a VI or how to go about writing one that will prevent the computers time/date from being disabled while an application is running.

Does anyone know of a VI or how to go about writing one that will prevent the computers clock/time from being disabled while an application is running. The time and date can normally be reset while an application is running by clicking on the time/date in the lower right-hand corner of the computer screen. I have an application that runs over several days and it is critical that the time and date of the computer not be changed. Is there an easy way to lock this out from the user? Note that I am what I consider an advanced beginner in LV.
Thank you,
Chuck
Solved!
Go to Solution.

That is not something you can do from LabVIEW, as it is an operating system operation, and it will depend on the operating system that you're using. On Windows you can use a group policy to control this. Please Google on "prevent time and date change in windows".
Also, please try to refrain from stuffing your entire message in the subject block. Keep the subject short, but descriptive enough so it can be understood what you are basically asking. Thanks.

Hi All,i am currently working on a flex application that will allow the user to change the language

Hi All,i am currently working on a flex application that will allow the user to change the language within the application from english to Japanese and vice versa. And everything works fine.
I am using flex 4.5
We allow the user to save records with english or japanese texts.
problem
When the user manually enters Japanese text and tries to save it the record defaults back to the default name (which is in english). But if you copy the entered text and paste it and then save it.It works fine.
Any idea , why this is happening?
Please let me know if the question is not clear.
Looks like there was already a bug
https://issues.apache.org/jira/browse/FLEX-28894?page=com.atlassian.jira.plugin.system.iss uetabpanels:all-tabpanel
Not sure why does it say , Resolved .
-KB
Message was edited by: bKartik.b

By Payal integration , you mean paypal button html ? or payment gateway setup etc ? If its a gateway configuration for your site domain then single page for all layout will work , but if you are using button code for all renditions then you would need to create separate pages for all.
Thanks,
Sanjit

My Theme disappears from the DVD after I burn it on to a disc. I know it's there but my DVD player doesn't "see" it. How do I burn an iDVD that will play the theme?

My Theme disappears from the DVD after I burn it on to a disc. I know it's there but my DVD player doesn't "see" it. How do I burn an iDVD that will play the theme?

It sure is. It also plays on my PC using VLC Player. So, I know that it was burned onto the DVD.

FM or BAPI that will change the address in table ADRC

Hello,
Is there any Function module or BAPI that will change the address in table, ADRC?
Regards,
Remi

Hi,
I don't use Business Partners / Biller Direct related information... So, the related FMs :
BUPA / EBPP might not help
My aim is to update ADRC table.
I have found a couple of FMs that has to be followed in an Order :
For inserting an Record :
1) ADDR_INSERT
2) ADDR_NUMBER_GET
3) ADDR_MEMORY_SAVE
4) ADDR_MEMORY_CLEAR
For Updating :
1) ADDR_UPDATE
2) ADDR_MEMORY_SAVE
3) ADDR_MEMORY_CLEAR
But i don't know what to fill for address_handle !!
How do i use these FMs??
Regards,
Remi

How to make a java program, that can be used by c++ application

I'm developing a Java web application (WEBapp), but I have also a c++ program.
C++ program must use WEBapp method to communicate on the web.
How to make a Java public function that accept value, elaborate, then return the resul to c++ application?

jschell wrote:
You have C code.
You have Java code.
The two must communicate.I have a c++ program, and a Java program.
C++ program wants to communicate on the web (send text), and I'm trying to add this functionality to it creating a Java program.
NOW THE PROBLEM? How c++ program can use java-program (in local) to send data on the web?
You can just JNI to communicate either from java to C++ or from C++ to java. That is direct communication in that there is a single process involved. Thus you will no longer have a java application and a C++ application but rather a single application.I don't know JNI, i found http://java.sun.com/docs/books/jni/ and I think is too difficult to implement?
You can use files or sockets to communicate. Using sockets allows for any number of additional protocols including the previously mentioned web services. Those methodologies would allow more than one application to exist.I developed yesterday a java-side-interface using socket (in local host 127.0.0.1). So the c++ program must write or read to/from the socket to comunicate to java (then the java program send data on the web).
Finally it might be the case that you have a C++ application which you cannot modify. In that case then you MUST use whatever input/output mechanism that it supports. There is no choice. And until you have fully determined what those mechanisms are it is pointless to discuss a solution.I can modify the application, but I don't have developed it. The c++ application use a third-part dll (taken from SKYPE) to comunicate on the web: I have to remove the dipendence from this dll, and add the java program: java program must substitute the dll. It must be non-invasive to the c++ program. DLL calls can be "send(data)" or "receive(data)" or similar.
For this do you think that JNI is a must, or I can use soket on local host?

How do I end an application that will not close

I downloaded Citrix Receiver to my Macbook Pro. Went to try and log on to my work address, the application just keeps spinning and will not let me cancel or close. the red button has disappeared. I even uninstalled the app and I still cannot close or make it go away.

That's OK it take some time if your not a computer junky.
Good Luck, Best Wishes and I'm glad I could help.

How to make simple GUI application that use oracle 9i intermedia

Mr Lawrence,
i want to make a GUI application for storing and retrieving image data, can i build this application using delphi?
i try using borland delphi 7, but delphi doesnt know object type ORDImage and ORDImageSignature. do u have any reference about building GUI application??
I want my application can do inserting image into database, searching image by matching it's signature, make image signature for query image, displaying image, etc.
Or if i can't make this application using delphi, maybe u can give me another application developer beside Delphi.
Please help Mr Lawrence, i'm stuck (T_T)

I am not too familiar with Delphi.
If it does Object-Relational types, that could work.
Can it interface with PL/SQL procedures? If so, that would be the way to go.
That is what I have done with .NET applications.
Larry

Is there an application that will copy the content of a usb secretly?

for example if i plug in a usb to my computer. and i want to copy all of it's content. without telling it to anything.
and another that will speed up copying the content of a usb?

One thing that might work is Mountwatcher...
http://www.scriptsoftware.com/mountwatcher/
And a Script to copy if needed.
My favorite, Tri-Backup...
http://www.tri-edre.com/english/tribackup.html
can do this using the Trigger this action when Volumes Mount.

How do you add a button that will email the PDF its on?

I need to create a form but they want it to have a button that will open up an email to send that PDF as an attachment or something along those lines. Is that possible?

Just a bit more info. E-mail can be used, but has potential problems -- often related to the client machine that you have no control over. Use the data submissions (either FDF or XML) rather than the full PDF so you do not have to deal with Reader Rights and the related license issues. The FDF and XML data files are easily imported into the original form so that you see what the client sees. With those aspects in mind, just go ahead and try one. Be aware that you can add form fields using the form tools in the Advanced Editing tools, OR use the forms menu that will take you to Designer. You might want to try both to see the pros and cons. Be sure to keep such a test simple so you are not wasting time on your final form just for testing. I typically create a 1 page form that has all of the possible fields for such a test.

CES 2013 and items that will change the way you enjoy your Programming.

I was able to take time off from work this year, and spend it at the CES 2013 with Verizon in Las Vegas. The things that I was able to see opened my eyes to the future of video entertainment. As a Verizon customer and a Community Leader, I am very pleased with the way the industry is headed, and happy Verizon is leading the way in entertainment. Yes I am a big FiOS Fan! From the time I was first connected with fiber optics, I believe in 2006 with 15/5 speeds, and now Quantum speeds, I have been a happy customer. When the FiOS HD TV service was available in my area, I purchased my first 46” LCD TV. Can’t have FiOS quality on a 36 picture tube! Well you can, I just don’t believe it would look its best.
View the videos on the Verizon News Website. These provide a good overview of the way Verizon provides, and will provide entertainment to their customers.
Watch the video with Nicole Omo, who was showing Verizon devices and talks about items at the CES. Yes I was there and she was the first one I ran into when I darted off to see the new FiOS Media server as soon as I arrived at the show in the Verizon area.
http://newscenter.verizon.com/residential/news-articles/2013-01-verizon-ces-bringing-the-borderless-...
Now if you want the details on the server, see them on this page, where Maitreyi Krishnaswamy explains them in more detail, again watch the video. Also you may wish to view the video about Motorola Medios+ and DreamGallery. I can’t wait to get my hands on this new hardware. I had the experience seeing and using the remote at different times during the show, due to the huge crowds at the show, but I was hooked.
http://newscenter.verizon.com/residential/news-articles/2013-01-verizon-motorola-fios-tv-media-serve...
Photo by prisaz
Widgets display with YouTube
In the video found via the link below, Maitreyi speaks about the panel she was on regarding smart TVs, and if you look real close in the video as the camera pans to the right to shoot video of the panel sitting at the table, you may catch me as the second person in the second row of the audience. My day one at CES is when she talks about yesterday that refers to the opening day. Tonight I was out looking at smart BluRay players, as my 46” Samsung is a bit older.
http://newscenter.verizon.com/residential/news-articles/2013-01-verizon-ces-minute-maitreyi-krishnas...
The first day of course was Tue. 1/8/13 I wanted to see everything, but was able to see the start of the show. What I really went for was the Verizon area with the VMS, and it doesn't do it justice to call it a booth. I sat and listened to panel discussions of industry experts. Then of course the Keynote Address from the Verizon CEO Lowell McAdam. FiOS!
http://www.youtube.com/watch?v=oyKx_615hOA&feature=youtu.be
Day two on Wed. 1/9/13 there was more time at the Verizon area and getting to see all the cool stuff. I was always attracted back to the Entertainment Area, with the new Media Server. Of course there was a chance to meet with various Verizon staff. To put this show together you know there were key people that were at the show. It is not every day you get to meet with the people you see on the websites. Putting the names and faces together with the people was really nice. Though they were all very busy with the media and the press, they managed to find the time to meet with customers like myself. I walked the entire South Hall top and bottom of the LVCC which seems like 2-3 football fields.
Everyone is talking and writing about the new FiOS TV platform. Six tuners pause and resume in any room! These are just a few of many articles. The VMS is buzzing, but what I heard was whisper quite, that is when it was running, with the exception of the excellent audio.
http://techcrunch.com/2013/01/07/verizon-and-motorola-announce-fios-tv-media-server-that-can-record-...
http://www.zatznotfunny.com/2013-01/verizon-6-tuner-media-server-dvr-arriving-soon/
https://twitter.com/davezatz/status/288716545985740800/photo/1
http://www.engadget.com/2013/01/08/verizon-media-server-and-ip-client-hands-on/
http://www.cedmagazine.com/products/2013/01/ces-motorola-provisions-new-media-server-for-verizon
http://www.dslreports.com/shownews/Verizon-Announces-FiOS-Media-Server-122656
http://www.theverge.com/2013/1/7/3848874/verizon-details-its-new-fios-tv-media-server
http://www.iptv-news.com/2013/01/verizon-picks-moto-for-next-gen-fios-tv-media-server/
http://www.fierceiptv.com/story/verizon-motorola-team-fios-tv-media-server/2013-01-08
On my third day of the CES it was time to head off to the Central Hall to some TV vendor areas where I could see the types of Smart TVs and devices that would take advantage of the entertainment services the new Verizon hardware and streaming features can provide. What you have should work just fine if you are a FiOS customer. Or even if you are not. I could not pass up the chance to see all the new stuff for TVs. Curved screens, 10K TV. Etc. At home we have an Xbox with the 75 channels streaming over the Internet, but the Smart TVs are really amazing. If you do not have a smart TV, you may wish to make your TV smart with the use of an LG or perhaps Samsung BluRay player. For streaming to a portable device I do not have an Ipad, but do have an Iphone. It is amazing what Redbox Instant by Verizon can do, even on an Iphone. Redbox Instant by Verizon will be available to the public soon after testing. After walking what seemed to be miles, I was back at the Verizon space for some additional video that was being done.
Day four was finishing up for the trip home and winding down. The flight home from Las Vegas to Baltimore Washington International seemed like it was going to be a longer trip than the one out to the show. I did have one stop in Denver that held me there for a while because of snow, but I did manage to get on the Verizon Community Forums from 41,000ft in the sky, and may have even made a few posts.
Solved!
Go to Solution.

Another item I should mention. The photos in my previous post were taken with a phone. So if some are blurred, that is certainly not the way the TV picture looked. So excuse my poor photography.

How to make a Java application that will change the client box's IP address

Similar Messages

Maybe you are looking for