How to make a mac os x snow leopard usb recovery back up?
I bought a new hard drive so i need a mac os to use it. How do I make a recovery disk for 10.6 so i can install 10.6? All that i have to use is a friends macbook with it installed, and a 16gb flashdrive, also i have the recover disk assitant from apple. is that all i need to install it on my new hard drive?
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
The Recovery Disk Assistant is for Lion and later. It doesn't work with Snow Leopard. If you don't have a Snow Leopard installer DVD or a Snow Leopard bootable flash drive installer, then you cannot install Snow Leopard until you get one or the other:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Similar Messages
-
How can I install Mac OS X Snow Leopard on Mac OS X Tiger?
Hello. Can someone tell me how I can install Mac OS X Snow Leopard on Mac OS X Tiger? I have the disk, but when I open the installer, I get a message saying that Snow Leopard could not be installed on my computer and it could only be installed on a Intel-Based Mac. This is a PowerPC Mac, so that makes sense.
So, I'm trying to ask how to make my Mac an Intel-Based Mac so I could install Snow Leopard. Or if I can't do that, I need to know how to install Snow Leopard some other way. Please help.Just an FYI, the Mac App Store was introduced with Mac OS X 10.6.6. However the rest of what you say is accurate.
10.6.8 is required if you want to upgrade certain Macs beyond 10.7.5 without having to reformat the drive you are installing the operating system on and without having to install some version of 10.7 first.
One can actually install 10.7 or later if you maintain an original copy of the full installer of the operating system in question for your personal use without having to have the prerequisite operating system installed, if the hardware supported it. But that's a discussion for another forum.
For HFTaylor,
Consider buying a used or refurbished Mac with an Intel CPU depending on your needs. Read this tip about the migration of data from PowerPC to Intel before proceeding:
https://discussions.apple.com/docs/DOC-2295
and see this tip about used and refurbished Macs*:
http://www.macmaps.com/usedrefurbished.html
* Links to my pages may give me compensation. -
my macbook pro 15 is down. want to know how to burn a mac os x snow leopard 7GB on 4.7dvd using windows
A Mac OS 10.6 retail DVD can be obtained for only $20. Of course that depends on where you live, but if available to you, it is a reasonable price, and will solve your current problem.
Some details about acquiring the DVD at this link,
https://discussions.apple.com/thread/4368218?tstart=0 -
How do i download mac os x snow leopard
how do i download mac os x snow leopard
You cannot download OS X. You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. -
Erased Mac OS Lion, But how can I reinstall Mac OS X Snow Leopard
Greetings
I had erased Mac OS Lion, and I woudl like to Reinstall Mac OS X Snow Leopard agine from DVD installer?
I have MacBook Pro, i7
have a nice day
SuleymanInfact, I didn't deleted any partition, I created a new partition, in windows, using Computer Manager, then I formated this new partition, after that, it seems that windows changed the other partitions !!
I boot my MacBookPro using a snow leopard Mac DVD, and click on Disk Utility.
There is 3 partitions:
Disk0S1 440 GB
Disk0S2 60GB
Disk0S3 2MB !!
partition type for three of them is Wondows_LDM, not Mounted, and no more info about other parameteres.
When I click on repair disk, or verify disk, it says: "reparing volume failed: Unrecognized file system"
Note: when I purchased my macbook pro A1278, The Original osx was Lion. -
How do you install Mac OS X Snow Leopard on an Apple Intel Developer Kit?
I want to get an Apple Intel Developer Kit from 2005. It comes with Mac OS X Tiger. I was wondering if you could install Mac OS X Snow Leopard within Tiger or you have to clean install it using iBoot.
What is the underlying Hardware of a "2005 Apple Intel developer Kit" ??
Your Apple License agreement requires Apple Hardware. -
How to make Canon printers work with Snow Leopard
Can anyone explain simple language (I'm not technical which is why I chose Apple) how I can get my Canon MP 980 printer/scanner to work with Snow Leopard.
Everything used to work perfectly and I'm beginning to regret the upgrade to Snow Leopard (what other suprises are waiting for me when I'm in a hurry?).
I have other Canon printers in various locations (MP 600, MP 530 and iP90). Will I have similar problems with all of them and, if so, is there a simple way to resolve the issues across the board?
I checked the Canon web-site but was totally confused
Any help truly appreciated.According to Apples website; they should work. Please see: http://support.apple.com/kb/HT3669#canon
The driver version should be: 10.26.1.0 (or greater)
The above article was modified in December 15th 2009
If after installing the most-up-to-date driver, via the link provided, the issue persists, reset the printing system.
How-to reset the printing system:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
Then install the printing driver supplied by Canon on Apples website here:
http://support.apple.com/downloads/CanonPrinter_Drivers_for_Mac_OS_X_v106
If that still does not work, reset the printing system again. Now go to Canon's website and get the driver(s) for mac there.
Canon's website for driver download for the PIXMA MP980:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=334&modelid=17357
There is the possibility the drivers on canon's website could be newer than apples. The version numbers, size of file to download, and release date all appear to be quite different.
On *apples website*, the driver info stats:
* Version: 2.2
* Post Date: November 16, 2009
* Download ID: DL899
* File Size: 274.59MB
On *canon's website*, the various driver info stats:
File Name and Description Version File Size Date Posted
ICA Driver Ver. 1.3.0m (Mac OS X 10.6)
icaosx130m.dmg
1.3.0m
5.37 MB
01/05/2010
MP980 series CUPS Printer Driver Ver. 10.26.2.0 (Mac OS X 10.5/10.6)
mp980sosxcp102620ea8-2.dmg
10.26.2.0
10.11 MB
12/25/2009
MP980 series Scanner Driver Ver. 14.8.2 (Mac OS X 10.3/10.4/10.5/10.6)
mp980sosxsd1482ea8-2.dmg
14.8.2
23.86 MB
09/01/2009
MP980 series MP Driver Ver.1.0 for Network (Mac OS X 10.6)
mp980sosxns10ea7-3.dmg
1.0
39.56 MB
11/05/2009
MP980 series Printer Driver Ver. 7.13.1 (Mac OS X 10.3/10.4/10.5)
mp980sosxpd7131ea8-2.dmg
7.13.1
7.34 MB
06/15/2009
+I do not own the same printer+, however I would suggest installing some of or all of the following 3 drivers.
If your printing via USB:
MP980 series CUPS Printer Driver Ver. 10.26.2.0 (Mac OS X 10.5/10.6)
If your printing via a Networked Printer:
MP980 series MP Driver Ver.1.0 for Network (Mac OS X 10.6)
If your going to use the scanner:
MP980 series Scanner Driver Ver. 14.8.2 (Mac OS X 10.3/10.4/10.5/10.6)
If you scroll down further, past the 'drivers', that same website from Canon also includes step-by-step guides/manuals for setting up the printer/scanner, both via USB & WiFi.
If the steps above did not resolve the issue, please respond back.
Good Luck!
*The website for the Pixma MP600 (sorry no MP600R listed) is here:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=238&mo delid=13800#DownloadDetailAct
Message was edited by: MacLovin54321 -
How can i install mac os x snow leopard on Lion?
You cannot. Either you erase the drive on which you installed Lion then reinstall Snow Leopard or you create another partition on the drive and install Snow Leopard on that partition so you can dual boot.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
How to restore my mac (using OSX Snow leopard disc)
I recently purchased an iMac10,1. I purchased it with OSX 10.8.4 (Mountain Lion) already installed... I contacted the seller asking for the original OS discs... he never replied :/. I have recently resold the Mac on ebay... When I went to wipe clean the computer I encountered a problem.. When I went onto this forum and called apple they encouraged me to purchase the original install OS (Snow Leopard). I have recieved snow leoipard in the mail... When I popped the disc in i recieved this message:
How do I reboot/resart/reformat the computer to factory settings?Try doing this instead:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
If this doesn't launch the installer, the contact Apple about replacing the disc they sent to you. -
How can i install mac os x snow leopard on a macbook pro new hard drive
I replaced the hard drive on my macbook pro and I'm having difficulty installing Mac Snow leopard on the new hard drive. I press "C" when rebooting with the disk inside and all I get is "you need to restart your computer. Hold down the power button until it turns off, then press the Power button again" any suggestion?
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc. Insert the disc into the
optical drive and restart the computer. After the chime press and hold down the
"C" key. Release the key when you see a small spinning gear appear below the
dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, set the format type to Mac
OS Extended (Journaled, if supported), then click on the Partition button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current. -
How do I get iTunes to show up so I can make playlists and burn CD's as I was able to do in MAC OS X Snow Leopard? I upgraded to MAVERICKS so that I could have iCloud capabilities.
Hi ...
Help here > iTunes 11 for Mac: Create a playlist -
Hello,
I have installed mountain lion on my macbook pro ,but it made my mac very slow. Would someone please tell me how to uninstall this one and reinstall snow leopard? I tried to do it by my original CDs but macbook pro didn't let me to do it.
ThanksIt would be easier to just fix whatever is making your machine slow.
I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise. -
Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?
See this article.
-
How to make a mac managed in wgm
Could anyone point me in the direction of a how to make a mac managed in workgroup manager, ive done it before, but i cant remember how to do it, all i can remember was that once the mac was managed it had a $ after it, then WGM can manage that macs preferences.
Thanks
RobHi John
I think im trying to do something different, to enable WGM to control clients macs preferences, i had to add a computer to workgroup manager in accounts/computer tab, when the computer was correctly bound (or binded) it looks like my picture, with a $ at the end of it, im trying to add new computers to this list, i just cant remember how to do it, like i say i could have done it through open directory utility. -
How do I install my old my 2010 Mac book pro/ Snow Leopard 10.6.3 program on a power Mac G5 Desktop
A PowerPC G4 or G5 can't be upgraded past 10.5.8. If you're trying to install an application and not a newer Mac OS X version, check its system requirements and use the original disk or download.
(106964)
Maybe you are looking for
-
Formatting Hard Drive to use with TM and Windows
I hope this is not a strange question. I have new iMac with 500GB, and a Windows XP system that I'd like to use with my new eGO 1TB USB drive. Will this work: - Partition 750GB for Time Machine - Partition 250GB to allow my Mac to store files permana
-
Populate save as dialog box with predefined filename
I have a button in a form that when click, pop up a 'save as' dislog box. The java script command is as app.execMenuItem("SaveAs"); How can I populate a pre-defined filename to the dialog box? Thank you.
-
CP3525dn, networked -- default duplex for all users (embedded web server)
I want to set the default for all users on our networked CP3525dn to be duplex. I cannot find this option anywhere in the embedded web server. I have duplex turned on, of course, and users can set their own default to duplex, but I want it to be defa
-
Every time I click on firefox icon to get to web I continue to get this account from microsoft asking me if I want to run this option. I already have firefox in my c drive. This just started about 3 days ago. I used to click on firefox and it automat
-
Notification words "Text Messages" in BB Hub is in French - "Missatges de text"
Just got my Z10 a week ago and I love it. still figuring out some of the workings, but in general I'm enjoying it. Only weird thing is that in my BB Hub, the words "Text Message" actually appear in French - "Missatges de text" and I can't figure ou