How to make a magnifying glass link to a look up table ?

Dear Friends,
Hello. I am developing the accounting application of journal entry. In journal line, I use the image "magnifying glass" next to each chart field. When we click on the magnifying glass, it's supposed to come up a look up table( a chart and name mapping table), and we select the proper chart to input into the chart field.
I understand to create another record and page for the look up table. But I don't understand how to make a magnifying glass link to a look up table. Can anybody tell me how to do that ? Thanks.
Lucy

This is how it works,
Table A (which stores chart fields). You have used fields from table A on a page so that users can input data.
You don't need to put a magnifying glass image or create a new page to achieve look up page.
all you need to do is create another table say Table B which should have the chart field and corresponding description you want to show on lookup page. Then open record-field property of the chart field on Table A and mention Table B as prompt table.

Similar Messages

How to make site root-relative links work in DW and Server both?

See details on buggy DW image link behavior, below. My question is:
1) how to make site root-relative links work in DW and Server both? Or…
2) how to reliably automate the change of several hundred legacy root-relative links of the form
/images/image.jpg to document-relative?
That is, to
../images/image.jpg or
../../images/image.jpg or
../../../images/image.jpg etc…depending on where the directory is.
The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
I tried changing the files to how DW creates root relative links now:
/public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link? I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
Summary of buggy behavior: (see test with images here)
"old style" site root link
      /images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a (existing format)
"new style" site root relative link
      /public_html/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: broken
      Ease of switching: easy
Document relative link
      ../../images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: good
      Ease of switching: hard (how to automate?)
Absolute link
      http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a...not a real option
Thanks!
Similar discussion on "/"

Hello again Jon!
Thanks for jumping on this.
All clear and understood about where publc_html is etc.
No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
"/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url, which is automatically set to http://www.oasisdesign.net/public_html/
it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
Art
PS--don't have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
Is there an easy, automated way to change links sitewide from document to root relative?

How to make visible Time Sheet link

Hi,
I want to know how to make visible Time Sheet link on portal for a particular Personnel Area so that employees of this PA can fill their Time Sheet from the portal.

HI,
Use Tcode - CAT 2
Regards,
Shadeesh.G

How to make graphics in pdf link to real size gifs/png

This must be an old question, but when we were going to online help form Frame documents, we chose RoboHelp because we had a perl script
that would swap back the old (96ppi) screen captures in the html, and so the user would see the large GUIs clearly.
We are looking to go to an html front end that points to within the pdf documents, but the screenshots are still unclear, is there a way to have
a tooltip over each image in the pdf to click to enlarge and then the user would double-click and the original gif/png would appear? The original GUI images would be in a directory with the online help.
Thanks

That makes sense. So I guess it looks like I have 2 options.
1. Put the JS short code in and have it open the link in a new window if the user opens it in adobe. If a google chrome user opens it in the default viewer, they wont be able to use the link at all.
2. Leave the link how it is, and it will be usable in both viewers, but will not open it in a new window.
I am sureprised that opening the link in a new window isn't just an option in Acrobat Pro. I wouldn't think you'd have to make a workaround like this.
Is there an alternative way to have a page link on the form so that people can go to another .pdf whil keeping the main one open?

How to create a magnifying glass for image details

hello,
i am displaying an image with high resolution,so that the image on the screen has not the real resolution.
to look at details i want to move the mousepointer over the image and in an area under the mousepointer there should
appear the related part of the image with original high resolution,like a magnifying glass.
so what can be a solution for this?
thanks axel

Hi
I have created a sample here with Flex for
magnifying glass in flex:
http://devsachinonflex.blogspot.com/2010/04/magnifying-glass-in-flex.html Sachin dev tripathi
Flex Developer

How to make the Page UP and down work on a table control screen?

Dear all,
Can some one suggest how to make the table control screen work with Page Up and Page down controls.
when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
Regard,
Vj

Take this code as a referance:
Sample code for vertical scrolling in PAI processing will look like this:
MODULE user_command_XXXX INPUT. (XXXX is screen no.)
CASE ok_code.
    WHEN 'P--'.
      CLEAR ok_code.
      PERFORM paging USING 'P--'.
    WHEN 'P-'.
      CLEAR ok_code.
      PERFORM paging USING 'P-'.
    WHEN 'P+'.
      CLEAR ok_code.
      PERFORM paging USING 'P+'.
    WHEN 'P++'.
      CLEAR ok_code.
      PERFORM paging USING 'P++'.
*&      Form PAGING
*       Form to do scrolling for screen XXXX
*      -->CODE   OKCODE value (P--, P-, P+, P++ )
FORM paging USING code.
DATA: i TYPE i,
        j TYPE i.
CASE code.
    WHEN 'P--'. <table control name>-top_line = 1.
    WHEN 'P-'.
      <table control name>-top_line =
              <table control name>-top_line - line_count.
      IF <table control name>-top_line LE 0.
        <table control name>-top_line = 1.
      ENDIF.
    WHEN 'P+'.
      i = <table control name>-top_line + line_count.
      j = <table control name>-lines - line_count + 1.
      IF j LE 0. j = 1. ENDIF.
      IF i LE j.
        <table control name>-top_line = i.
      ELSE.
        <table control name>-top_line = j.
      ENDIF.
    WHEN 'P++'.
      <table control name>-top_line =
             <table control name>-lines - line_count + 1.
      IF <table control name>-top_line LE 0.
        <table control name>-top_line = 1.
      ENDIF.
ENDCASE.
ENDFORM.                               " PAGING
Regards,
Ravi

How to make validation in Bean and select value from another table

I want to know how to select data from table in backing bean according to primary key i have
the problem is that
i have a table Employee_Salary contains Employee ids and their salary
Empoloyee_Salary table
     Employee_ID      Number
     Employee_salary Number
And Another table Called Employees
Employees table
     Employee_ID     Number
     IsManager Varchar2 its value is [*Yes or NO*]
and other columns that i don't care about this table
i have on a jsff page an <af:table> this table is editable this is the Empoloyee_Salary table
*i want to check before save or after insert if this employee is Manager [from Employees tabke(yes or no)] the salary*
cannot be less that 100
i want to know how to make this how to select the value from employees table according to the id i have in the employee_salary table how to make this and make this validation
i have to select IsManager from Employees Table to see if this manager or no
i want to know how to make this in a bean
i use jdeveloper 11g
and my project is ADF Fusion project
and the page that have the Emplpyee_Salary table is JSFF
thanks in advance

You might want to write this code in a validator on the entity object if it should apply from every screen.
If you want to access view objects from a backing bean the basics are here: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcservices.htm#sthref918

How to make an Mp3 player, with some neat looks?

Hey guys,
I need to make an mp3 player, with some nice looks.
Please help!

maybe try this
http://jplayer.org/

How to make Mail always open links behind Mail?

Love how you can right click and Open a Link Behind Mail in Apple Mail - is there any way to make this behavior the default?
Using Mail to do all my RSS-ing and click a lot of links - just want them to stack up behind mail (in tabs) then I can exit (hide) Mail and go browse and click away into oblivion.
Any clues?

Ha, answered my own question - thought, what happens if I Command-Click html links in Mail - sure enough they open in Firefox (my default browser) in the background behind Mail. Very nice

How to make a secure QT link?

I wish to post QT movies on my website but do not want them to be DLable via QT Pro or via Safari/whatever browser Activity monitor or a 3rd party DLer.
How do I achieve this?
Peter

I guess you don't want your video to be able to be downloaded. You can use html code...but that can be hatched or bypassed in a few seconds.
The only way to try to safeguard your on the internet is to put your videos on a streaming server. ( http://www.apple.com/quicktime/player/tutorials.html ) Even on a streaming server one can use a screen capture (video) program like Snapz PRO X to capture your video.
There really isn't a sure fire way for safeguarding your videos on the internet. You can only make it harder to download your video.

How to make text CSS text link with HOVER

How do I nake text links using CSS and the hover function?
I am new to this
Thanks

This should help
http://www.projectseven.com/tutorials/css/pseudoclasses/index.htm
Jo
"electro-dud" <[email protected]> wrote in
message
news:fcnnis$cv7$[email protected]..
> How do I nake text links using CSS and the hover
function?
>
> I am new to this
>
> Thanks

How to make the Applicant name link disabled in the webform of oracle apps

Hi,
In iRecruitment module,i have created a new responsibility with the name "irecruitment - interview" the menu attached with the responsibility is "Irc Employee Menu" and the functions and menu excluded are "Irc Employee Applicant Home Page","Irc Employee Home Page","IRC Employee Candidate Application Menu","Irc Employee Referral Application","Irc Interviewer Application".
When i click on the responsibility the applicant names come,and on the applicant name link is there,on clicking onto the applicant name the other information of the vacancy also becomes visible,i want that the applicant name should be visible but the link link which is coming onto it should get disabled.
In order to achieve this i have gone to personalisation and under the "Applicant Name" i set the "Popup Enabled" to "false" at the responsibility level.But it is not working out.
Please tell me how can i achieve this.
Regards
Ankit

Hi Avaneesh,
When i goes to the personalisation in the "Destination URI" at all the levels i can only see "inherit" written how to remove the "URL" as specified by you.
Please reply
Best Regards
Ankit

How to make the HR Renewal links readonly (webDynpro hrpao_paom_masterdata)

Hi
We are using HR Renewal FP3.
There are useful links in portal that allows the HR Professional to create and edit employees, positions and org units.
But we wanted to make these functionalities read-only from portal (while they have edit access in backend).
is it possible ?
Thanks
Raghu

I found the solution by myself ....
Problem: hr_maintain_masterdata crashes with shortdump while writing an hiring action.
Cause: we implemented infotype enhancements via userexit where parameter VIEKN is queried. The parameter VIEKN is saved in infotype 3. In LUW-mode 3 theres no existent IT0003 when hiring a person (because nothing is written to database) that causes the shortdump ...
solution (workaround): First I have to call maintain_masterdate just with infotype 0000 (without reference pernr!) ... that triggers the creation of it0003 by the system itself ... then I have to call a second maintain_masterdata with all the other infotypes of the action and everything works fine! Now the new person is in the system and while creating the person, the system also created a new central person and a link between the new CP and the new person.
after doing this (and did'nt get any failure!) I have to determine the central person (CP) of the referenced person, making a new link between the new person and the referenced persons CP, deleting the link between the new person an d the new CP, deleting the new cp and every thing works fine!!!! the reason for this is: infotype 31 just shows the "links" that are defined in OM
if anybody is interested in more details, just contact me
Edited by: Raabiat on Apr 4, 2011 11:35 AM

How to make Robo list style link to Word style?

I am using RoboHelp 8. When creating printed documentation, I have found that my RoboHelp list styles do not appear in the Print Document Appearance dialog when I am trying to link Robo styles to styles in my Word template, so I am not able to link them to styles in Word. All list styles come across in Word as Normal, although oddly their bullets and numbers appear correctly.
Is there any way to link Robo's list styles to Word's list styles?
Thanks for any available enlightenment.
John

The official answer is that you cannot map single level lists but there is a method on my site.
http://www.grainge.org/pages/authoring/lists/lists_single_level.htm
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to make a numbered heading "link" to the next heading so it updates

Heading 1 is in the header. It is numbered A,B,C.
Heading 2 is in body It is numbered 1.
Heading 3 " 1.1. etc.
they are not linking so that Heading 3 turns into 1.1. it stays 1.

For a numbering scheme that goes
A
1
1.1
1.2
1.3
2
2.1 etc.
you have three levels. The first and second levels increment +1 each
time they occur. The third level is the number to the right of the
period, and it also increments +1 each time. The number that shows up to
the left of the period is a number placeholder for the second level (the
button to the right of the Number: field in Numbering Style). It will
not increment, but picks up the whatever number was last displayed at
the second level. So assuming you've got 3 levels in this list scheme,
your Number: for the 3rd level (the 1.1 level) would look something like
this:
^2.^#^t
The ^2 is the number placeholder, displaying whatever number showed up
in the last level 2 instance. The ^# is the current third level number.
And the ^t is a tab.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

How to make a magnifying glass link to a look up table ?

Similar Messages

Maybe you are looking for