How to make a mapping (transfer rules) when implement cProjects 4.0 BW 3.5

Hello all, i am implementing BW business content 3.5 with cProject 4.0 and i still solve question regarding mapping in transfer rules. First i didnt know which datasource belongs to which infosource, this issue i solved but now i am not sure how to make a mapping in transfer rules . It is not so easy to make a mapping because of nothing saying infoobject GUID. Can you please provide exact mapping of fields in transfer rules for cProjets datasource-infosource. Screen shoots of your transfer rules will be helpfull. Or if you have any documentation or scenarios for BW and cProjects implementation it will be appreciate.
Thanks.

Similar Messages

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then <u><b>'activate' the transfer rules</b></u>.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
<b>Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How to make the backlight stay on when charging? N...

Hi
How to make the backlight stay on when charging? or it is not possible?
Thanks

Did you select HIDE under the Options (in the application) ? Its working fine on my Nokia 5800xm
There is one more.. KeepItOn also available at OVI Store..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

How to make icons of photos bigger when selecting to attach to email?

how to make icons of photos bigger when selecting to attach to email?

Changing the DPI to 120 won't affect the font size of the menu bar in the Editor. See this FAQ for what happens when you change the DPI:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#The_Organizers_Menu_Bar_ doesnt_show

How to make VPN client auto timeout when it still idle?

How to make VPN client auto disconnect when it still idle?
Hi,I found some user still connected the VPN evenif they dose not use the VPN resouse.
I try to set a "idle timeout" for the VPN configuration.
We use PIX515 8.0.3 and CISCO ACS 4.2 for the VPN's connection and authentication,and the user use cisco vpn client for the connection.
I have tried many methods,but all failured.
First,I configed "vpn-idel-timeout 5" on PIX.It can not worked.
so,I add Radius(CISCO VPN 3000/ASA/PIX 7.0+) attribute "[026/3076/050] Authenticated-User-Idle-Timeout" on CISCO ACS,It still not worked.
And I also add IETF RADIUS Attributes "[028] Idle-Timeout" on group setting on ACS,it always not worked.
i found in vpn client's statistics,it always has some byte sended or received, i thought it maybe IPsec keepalive message or Radius message.
This maybe the reason because the PIX or ACS think the vpn user is keep working.
Can someone tell me how to make a "idle time out"?
best regard.
Roger

here is the configuration on PIX,
group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value mydomain.com
address-pools value vpnpool group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value want-want.com
address-pools value vpnpool

HT4623 How to make Google Maps as the default Map App in my iPhone 5

How to make Google Maps as the default Map App in my iPhone 5, so that I could still use the old bookmarks and use the pins to drop, Please assist.

You cannot make Google Maps the default mapping app.

How to make a rubber effect like when you swipe between apps using 4 fingers on iPad ?

Hey guys,
So how to make a rubber effect like when you swipe between apps (first or last app) using 4 fingers on iPad iOS7 ? Any examples ?
Thanks!
Ivan

Please do not double post the same question.
Just like I said before. Animate X scale and position. Set the anchor point of the left image to the left side. You can then use an expression or just generate keyframes for scale. When you flip to the next screen then animate position. Easy basic animation except for the bounce. Key framing the bounce so that it looks natural takes a lot of experience or an expression.
Google bounce expression after effects and find this. http://www.motion-graphics-exchange.com/after-effects/Wiggle-rubber-bounce-throw-inertia-e xpressions/4ad0f32a944ad
There are a bunch of other solutions.
There is no single click solution to this problem and it is not an effect, it is an animation.

How to make apple maps default on my mac?

I want apple maps to default on my map, e.g.., when I need to send meeting location address in calendar.

Hi ajjacoby14,
To make iTunes the default application to use for playing music, use the steps found in this article -
iTunes for Windows: How to make iTunes the default application for music and audio files
Thanks for using Apple Support Communities.
Best,
Brett L

How to make a button stay down when I click on it in CSS nav bar.

So I have created a horizontal navigation bar, I use the CSS
Sprites/Pixy method to get the hover working with the same image as
the link/in active stage of the buttons.
Now how do I make the button stay down when someone click on
them?
These are the codes for the nav bar.
#nav{
width: 780px;
list-style: none;
margin-top: 0;
margin-right: auto;
margin-bottom: 0;
margin-left: auto;
padding: 0;
height: 40px;
#nav li{
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
font-weight: bold;
float: left;
padding: 0;
#nav a{
width: 125px;
display: block;
color: #000000;
text-decoration: none;
text-align: center;
background-image: url(ZITTO_IMAGES/button_set1a.jpg);
background-repeat: no-repeat;
background-position: center 2px;
padding-top: 14px;
padding-bottom: 10px;
background-color: #000000;
#link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
#nav a:hover{
background-image: url(ZITTO_IMAGES/button_set1a.jpg);
background-repeat: no-repeat;
background-position: center -36px;
color: #FFFFFF;
width: 125px;
padding-top: 14px;
padding-bottom: 10px;
background-color: #000000;
Everything works so far, the hover works when you roll the
mouse but when you click the button goes right back.
How can I make it stay down and then go back to normal when
you click on another link/button?
Thanks very much.
Patrick

Read my suggestion again. You are missing a critical point. I
show you
exactly where to put the stylesheet. And it doesn't matter
how many
stylesheets you have on a page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Webethics" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> Change this -
>
> #nav a{
> width: 125px;
> display: block;
> color: #000000;
> text-decoration: none;
> text-align: center;
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center 2px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
>
>
> #nav a:hover{
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center -36px;
> color: #FFFFFF;
> width: 125px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> to this -
>
> #nav a{
> width: 125px;
> display: block;
> color: #000000;
> text-decoration: none;
> text-align: center;
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center 2px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
>
>
> #nav a:hover{
> background-position: center -36px;
> color: #FFFFFF;
> }
>
> Then on each individual page, change this -
>
> </head>
>
> to this -
>
> <style type="text/css">
> #nav a#link4 {
> background-position:center - 36px;
> }
> </style>
> </head>
>
> (for link4, for example)
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Webethics" <[email protected]> wrote
in message
> news:[email protected]...
> >
quote:
Originally posted by:
Newsgroup User
> > When they click on a button, do they go to another
page? And is each
> > button
> > uniquely identified?
> >
> > If so, then put a little stylesheet on each such
page that sets the
> > particular button to the down sprite settings,
e.g.,
> >
> > a#link6 { downspritevalues }
> >
> > --
> > Murray --- ICQ 71997575
> > Adobe Community Expert
> >
> >
> > This is the link to the page.
> >
http://www.patrickjudson.com/zitto_web1d.html
> > What state do I use to get this effect? The active
or the visited?
> >
> > I want the buttons to remain down when click or
even better, how do I
> > get
> > the
> > welcome button to appear down when a person visits
the page to show them
> > they
> > are at the home page.
> >
> > Thanks so much. Patrick
> >
> >
> >
>
>
>
> Hey! Murray, thanks very much for the efforts. However
I'm still confused
> as
> to where to insert the individual styles on each page.
>
> The pages already have a style sheet, in fact they all
share the same
> style
> sheet. The following codes below is what you instructed
but I'm confused
> as to
> where to insert them since the page already has a head
opening and closing
> as
> well as a style opening and closing tags. Can you please
add the codes you
> instructed so I can see where they go and how to
implement them?
>
> Thanks - Patrick
>
>
> Then on each individual page, change this -
>
> </head>
>
> to this -
>
> <style type="text/css">
> #nav a#link4 {
> background-position:center - 36px;
> }
> </style>
> </head>
>
> (for link4, for example)
>
>
>
>

How to make cost element field appear when create network activity service

Hi All,
Please help. We create a project ,wbs and network activity using external service. How can we make appear the cost element when the service master appear. The system require cost element but we cannot see the cost element field.
Steps :
*. CJ20n.
*. Create WBS and network header
*. Then network activity for external service.
*. Then it appears service specifications : ext specs Task List Maintain
*. I Put Service no, and the error message appears :
Please enter a cost element
Message no. SE121
*. But we can find where the cost element is. It seems the field disappear.
PLease help.
Thank you.
Nies

Hi,
Yes. It is already blank. But the cost element field still not appears when we create activity service. It shows :
Please specify a valid account assignment
Message no. SE181
Diagnosis
You have entered an account assignment category in the document item for which an account assignment is mandatory.
All account assignment lines in the service specifications either have been deleted or are inactive (e.g. account assignment lines of a contingency item).
Procedure
Please enter an account assignment for the services or value limits.
The entry of an account assignment is unnecessary if you choose "unknown account assignment" in the document item.

How to make iMac run less hot when in Bootcamp?

When I play a game in win7 trough bootcamp, my iMac gets real hot.
How to make it run cooler?
It sounds like fans could be running faster; but I want it to do it automaticly.

Download Lubbo Fancontrol for MacBook Pro to help with the fans.
Lubbo FanControl for MacBook Prohttp://sourceforge.net/projects/lubbofancontrol/
Also these
AIDA64 Extreme Editionhttp://www.aida64.com
http://www.aida64.com/product/aida64-extreme-edition/overview
CCleaner
http://www.piriform.com/ccleaner

How to make the background move over when a movie clip hits the edge

ok so the idea here is to make a page with written content on it. the conent will not be able to be seen unless the user hits the arrow keys on there key board. So i need to make a group of objects i can make into a movie clip and than inside that movie clip make an animation that plays the squirrel running. i will pause here to ask two things i dont know how to do i want the squirrel to have an animation when standing still where it flicks its tail (like a real squirrel would). and also how would i flip the squirrel so when the left key is pressed it points left and when the right arrow is pressed it faces left? and my main question when it reaches the edge of the stage the extended background that runs off stage moves over to reavel more content. as well as not have the squirrel run off stage? in short i am using the squirrel to view the full pages content.

You're asking for quite a bit and aren't likely to get anyone to hand you a detailed solution. Here's some things to think about.
As far as flicking the tail goes, that's something you'll have to work out as an animation. You could do it as a timeline animation and/or as a coded animation where you adjust the rotation and other properties of the tail.
Getting the object to face left and right ican be a simple matter of changing its xscale property from 1 to -1 depending on which way it normally faces (1).
If you don't have a problem making the squirrel move to the edge, then you should have no problem making the background move either. You just need to continually check the squirrel x property to know when it hits the edge. Personally, I would only move the background and leave the squirrel in the center.

How to get Hongkong Map to display 繁體 when cellpho...

How to set Hongkong Map to display 繁體 but keeping cellphone lanaguage in English?
I want to keep all interfaces in English, only local maps of China, Taiwan, Hong Kong & Macau to have street names in Chinese language (either 繁體 or 简体). The PinYin is an alien language to me.

Thanks farby. It is a pity there is no option to switch between the languages. Most locals here are bilingual and for some reason prefer to have the menus set in English but the maps. And those pin-yin names of places are not proper English names either.

How to make Logic auto-select channel when external instrument is selected?

I recently upgraded hardware and now have to upgrade the OS 9 software (MOTU FreeStyle) I've been using and join the 21st century. I asked a Guitar Center employee about what package to buy and stressed that I wanted the software to auto-select the midi channel since that was a major benefit (for me) in using FreeStyle. I was informed that all of the newer DAW software did this (which made sense to me, after all FreeStyle was already at least 10 years old, although no longer under development (hence OS 9.) Logic Express was specifically recommended.
Sadly, I don't see this capability in Logic Express. I don't understand why, if I have 15 instruments set up, and I select a new one, I have to manually look at each of the other instruments (assuming I don't have their channels memorized) and see what channels have been used so that I don't accidentally reuse the same one for the new instrument. Doesn't the computer already know what channels are unused??
In FreeStyle could have 25 instruments set up for a 16 channel keyboard, and as long as there was never more than 16 voices playing at any particular time, the software just managed the channels for me. I don't know what happens if you go over 16 for a 16 channel instrument, I don't think I ever did (I never had voices cut out anyway.)
Not to berate Logic Express, there's lots of cool stuff in it that I'm looking forward to exploring, and it sounds like you have to jump through hoops even to get MOTU's Digital Performer to emulate the same behavior and I suspect it's as much of a hassle to set it up as to just do it on the fly (from previous experience of "what a salesman says" vs. "what is real.") I'm just trying to figure out how to make the computer do the computer work so that I can do the music work.
I have lots of partial (and even some complete!) projects to port over and not nearly as much spare time as I'd like to spend playing. I'd rather spend my meager spare time composing, not fighting with the technology.
Any ideas?
Thanks,
-David

Hi bunker,
I can't test it at the moment but I think that can be achieved by slightly changing the code like so:
*<script type="text/javascript" src="http://code.jquery.com/jquery-1.4.2.min.js"></script>*
*<script type="text/javascript">*
*$(document).ready(function(){*
*$("td.GFPFilter span input").focus(function(event){*
this.select();
this.value = '';
*</script>*
Also, if you found my posts helpful or correct could you apply those labels to the relevant posts?
Cheers,
J
Edited by: J Kremer on 20-Apr-2011 19:23
Edited by: J Kremer on 20-Apr-2011 19:30

HT2623 How to make my full name disappear when sending from my primary email address.

I would like to make my full name disappear when sending from my primary email address. so the recipient when receives my email can see only my email address, i.e. email address of the sender. In Preferences, Accounts, my full name is greyed out and I cannot change it. If I try to do Custom, it would let me change it, i.e. delete my name from Full Name box, but then when Mail is closed and reopened, it would lose the previously saved Custom setting and go back to the same. All my other aliases associated with this email account work ok and the receiver sees only the email address.
Does anyone know what is going on?

What if you remove the .mac account from the Accounts panel under mail Preference?
If that doesn't work, sign into the webmail at me.com, click the "sprocket" button and select preference, in preference go the the aliases tab see if you can remove the email address with your name. If not, go to composing tab see if there is anything you can remove from the +Identity: send email as field+. Good luck.

How to make a mapping (transfer rules) when implement cProjects 4.0 BW 3.5

Similar Messages

Maybe you are looking for