How to make a menu structure in iMovie?

I made a movie in iMovie and put in here chapters .
Now I would like to find these chapters back into a menu structure on the DVD after exporting, how does this work?

Hi
A. There is a BUG in iDVD - reg Chapters
If You started an iDVD project - imported movie - find a fault => return to movie editor - fix it => return to iDVD. It (iDVD) will notice and ask You to up-date or Cancel.
Non work OK
Result is that all Chapters in iDVD Project now will point to Chapter one.
Medicine: Create a brand new iDVD project and re-import movie - and it works again. (and no turning back)
B. CHAPTER placing in iMovie or FinalCut - MUST BE DONE RIGHT
- NO Chapter mark in VERY BEGINNING OF MOVIE - else iDVD get lost
- No Chapter mark in or within 2 seconds from any transition - this can be worked around by first Export movie as FULL Quality QuickTime .mov ---> Import this in iMovie as a Brand New Project - Now all transitions etc. are flatted out (can not be edited more) - and in this Movie You can set Chapter mark at Your Liking except in very beginning.
C. HowTo - get movie into iDVD
- DO NOT - Share to iDVD - as resulting DVD will be BAD !
- Share to Media Browser - AND AS - Medium - not HD or other resolution as this too degrades the final DVD quality.
- in iDVD Import movie from Media button (down to the right) and from here / MOVIES
- Drag and drop Your exported movie into the big Menu Window to the left. Try to avoid "Drop-zones" as this don't import but creates a small movie button - but not the full movie.
(Best resulting DVD You get by not using iMovie'08 or 09 or 11 - But iMovie HD6 or FinalCut any version - as they can deliver a so much better picture.)
Yours Bengt W

Similar Messages

In JSF, how to make a menu with access control?

In JSF, how to make a menu with access control?
The access control can be guided by programming, database or other means if possible?
Thanks

I want to make a dvd menu in iMovie because i don't have IDVD and can't find anywhere to download it?
For making DVDs I would recommend iMovie 06 and iDVD 09 both readily available on Amazon or eBay. Shop for iLife 06 and iLife 09.
You can make menus and chapters with any version of iMovie except the latest one. There's nothing wrong with iMovie 11 either but I prefer iMovie 06.
By using iMovie 06 and iDVD 09 I make DVDs with professional moving menus with very little effort. They look almost as good as Hollywood.

Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
John
Message was edited by: John Cogdell - added NOTE

How to create a Menu structure in WDA( File, Edit, Help etc..)

Hi,
How can we create Menu structure on a Web page developed in WDA. So for example, on my application I need a Menu structure on top of it with following details:
File Edit Header Help
When user select all these heading, a drop down list with different option will come in each section. So basically I want to impement a functionaly similar like Menu of a Web opae, where Menu structure is defined by me.
Which element can be used for this purpose?
Regards
PG

Hi PG
Using MENU UI element you can acieve this...
Create MENU ui element, in that INSERT MENU, in that INSERT MENU OPTION.
CHECK THIS FOR HELP.
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/37/978b411fb4b05fe10000000a1550b0/content.htm
Cheers,
Kris.
Edited by: kissnas on Mar 8, 2011 11:50 AM

How to make context menu in Windows 10 application?

How to make context menu like this? With touch friendly and DPI per monitor awareness. Also considered WPF variant.

Hybrid app? Do you mean Universal app? Please explain what you're trying to make.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

HOW TO MAKE A REVERSE VIDEO IN IMOVIE FOR IOS

I woud like to know, if possible, in how to make a reverse video in my IPad.
Thanks to everyone!
G'day.

Searched for a solution and I found a video tutorial about this:
http://www.imoviehowto.com/imovie-ios-8-how-to-reverse-a-video-clip/

How to make the menu fonts larger in Bridge CC 2014?

I just upgraded my monitor to a 3840x2160 HiRez & Photoshop CC 2014 /Bridge CC 2014. I have been able to make the menu fonts large enough to read in Photoshop CC but not for Bridge. Any suggestions on how to enlarge the fonts in Bridge?
Thanks!

Add code to the userChrome.css file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("https://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#places * { font-size:16px !important; }
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration

How to make a menu for HD content (not BD)

I am a newbie on this forum and I am not sure where to post: I am a middle-aged woman with blond (grey) hair (**** happens) BUT I have been 'playing around' with computers since 1977. I have been editing video and audio since the 90's and mainly as a hobby I have made 100+ productions for f.i. tourist boards on DVD and BD. But now I am stuck: I know I am making some sort of mistake in thinking and I am asking you to help me to sleep again at night!
I have been uploading all my productions to a NAS and want to be able to show them every now and then, not the whole video but by chapter. With the DVD's that is no problem: the menu's stay as they are but with the BD it is a different story. My media players (Mede8er and Eminent) do not play the menu's but start the playback at the largest .mts, because they are not able (money wise) to communicate with JAVA.
I am looking for software that will make it possible to create (simple) menu's for HD content . I still have alle the original content and the software to make all kind of formats, both on PC and Mac, but I can not find anything on the net to help me !!! And of course I want to keep the HD quality! The only thing I have managed so far is making chapters with MKVtoolnix, but that is not to my liking.
There must be something I am overlooking: Apple is skipping all optical disks in favor of HDD's, but I can not imagine that there is no possibility to create some sort of menu structure?
Any help will be appreciated!

This is all way beyond me, but couldn't you just make an HTML page that linked to the video files on your server and use a browser?
MtD

How To Make Recovery Menu (F11) Functioning again??

Guys please help...
Currently I had created new partition and reinstall windows 7 on My HP Pavilion DV6-6001tx.
Since then, I found that recovery menu (enter F11) when booting is not functioning anymore..
How to make the recovery menu functioning again? is there anyway to do it???
For your info...the recovery partition still as it is....
This question was solved.
View Solution.

Depends on when you purchased it, recovery manager was not bundled until 2006 on HP notebooks.

How to make a menu (opened by an on click event) stay open on the following pages

Hi,
I have a side menu that shows the main headings only, when clicked it displays the rest of the menu using and slide effect, with an option to close the menu, on reversing the slide. This all works perfectly but what i want to be able to do is, when a users opens a menu and then uses that menu to navigate to another page, on that new page i want that menu that was opened to stay open on this next page.
The code i have so far is below:
// the function for the effect
function MM_effectBlind(targetElement, duration, from, to, toggle)
 Spry.Effect.DoBlind(targetElement, {duration: duration, from: from, to: to, toggle: toggle});
// the function to ensure the menu is unopened on page load
function myFuncDisplay (){
document.getElementById ('menu1').style.display='none';
document.getElementById ('menu2').style.display='none';
document.getElementById ('menu3').style.display='none';
document.getElementById ('menu4').style.display='none';
document.getElementById ('menu5').style.display='none';
<body onload="myFuncDisplay ();">
// the first menus code in the side menu that creates the on click and close menu actions
Menu One 
 <div id="menu1">
 close menu 
 <a href="firstLink.php">First Link</a>
 <a href="secondLink.php">Second Link</a>
 <a href="thirdLink.php">Third Link</a>
I have tried setting a variable in the on click event then in the function myFuncDisplay() doing if else clauses to check if the variable was set and if so displaying the div as block in that function, expecting just that menu to display opened in sunsequent pages, it didn't work, itstead it displayed all menus open?
Please can someone help me with a suggestion of how I can make this work, thank you in advance, i look forward to any replies.

Hi,
thanks for your reply, i am not actually using the spry menu, i am using the 'blind' effectthat I have adapted as per the code given, I wanted to make a menu that would open on click and the effect i have used works well, now however I want the effect to remain open on different pages, as explained. i am looking for a way of adapting the function that makes the rest of the menu hidden on page load. So on page load the menu is hidden as per adapted code, apart from the menu heading, if the menu heading is clicked the menu opens, with an option to close it, if the user clicks on a link in the menu the new pages loads and the menu is closed as per the onload instruction , I want a way to distinguish if the menu was clicked in one page it will recognise that and in the next page will not hide that particular menu until the user closes it themselves.
Hope that makes it a bit clearer? look forward to any further help.

How to make a menu for MHP

Hi, im trying to make a menu for mhp app, and i dont know what its the best 'tactic' for this.
My idea is to make own class like this:
class Menu extends HContainer
 private Font fuente;
 private Color colorLetra, colorFondoTexto, colorFondo;
 private HTextButton[] boton;
 int x, y, ancho, largo;
 // numVisible es el n�mero de valores que queremos se puedan ver en el men� al mismo tiempo
 // x, y es para que nos indique el punto inicial donde queremos que aparezca el men�
 // ancho para saber el ancho del menu
 // largo para saber el largo que debe tener - debe relacionarse con el n�mero de elementos a mostrar en pantalla
 public Menu(String[][] matriz, int x, int y, int ancho, int largo, int tamFuente)
 this.setBounds(x,y,ancho, largo);
 this.setVisible(true);
 colorLetra = Color.white;
 colorFondoTexto = Color.green;
 System.out.println("longitud de la matriz:"+ matriz.length);
 fuente = new Font("Tiresias", 1, tamFuente);
 int esp = 0;
 boton = new HTextButton[matriz.length];
 System.out.println("A ver si veo el elemento de la matriz: "+ matriz[5][1]);
 for (int i = 0; (i < matriz.length) ; i++){
 System.out.println("for " +i);
 // A ARREGLAR
 boton[i] = new HTextButton(matriz[1], 0, esp, 314, 20, fuente, colorLetra, colorFondo, new HDefaultTextLayoutManager());
 esp = esp + 20;
 if ((i != 0) & (i != matriz.length-1)){
 boton[i].setFocusTraversal(boton[i-1], boton[i+1], boton[i], boton[i]);
 else if (i == 0)
 boton[i].setFocusTraversal(boton[i], boton[i+1], boton[i], boton[i]);
 else boton[i].setFocusTraversal(boton[i-1], boton[i], boton[i], boton[i]);
 this.add(boton[i]);
 } // fin constructor
its a good idea? or there are better. Its first time i try make gui menu, and i dont know how to make it. I dont find information at internet, and ther isnt in book 'Interactive TV standards'. If you know some place with good tutorial (or book), please tell me!
Thanks all
Sorry my english

This is all way beyond me, but couldn't you just make an HTML page that linked to the video files on your server and use a browser?
MtD

How to make use of structure in my program

hai!
 i want to know how i can use the structure "rstxt'
which contains a field by name "txline". this structure is used to hold basic data text present in basicdata1 view
of transaction mm01. i want to know how i can access this structure in my pgm.here, i want to check this basic data text and if proper data text is not present then i am trying to call transaction mm02 using bdc.
any help is appreciated.

Hi, Try this example
DATA:BEGIN OF ITAB OCCURS 10,
 QMNUM LIKE QMEL-QMNUM,
 DESC(72),
 END OF ITAB.
DATA:F_TDOBJECT LIKE THEAD-TDOBJECT,
 F_TDNAME LIKE THEAD-TDNAME,
 F_TDID LIKE THEAD-TDID,
 ITAB_LINES LIKE TLINE OCCURS 0 WITH HEADER LINE.
 F_TDID = 'LTQM'.
 F_TDNAME = T_DET-QMNUM.
 F_TDOBJECT = 'QMMA'.
 CALL FUNCTION 'READ_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 ID = F_TDID
 LANGUAGE = SY-LANGU
 NAME = F_TDNAME
 OBJECT = F_TDOBJECT
 TABLES
 LINES = ITAB_LINES
 EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 NOT_FOUND = 4
 OBJECT = 5
 REFERENCE_CHECK = 6
 WRONG_ACCESS_TO_ARCHIVE = 7
 OTHERS = 8.
 DESCRIBE TABLE ITAB_LINES LINES SY-TFILL.
 IF SY-TFILL > 0.
 LOOP AT ITAB_LINES.
 ITAB-QMNUM = T_DET-QMNUM.
 ITAB-DESC = ITAB_LINES-TDLINE.
 APPEND ITAB.
 CLEAR ITAB.
 ENDLOOP.
 ENDIF.
reward points if it helps
kaki

How to make a menu in IMovie

I want to make a dvd menu in iMovie because i don't have IDVD and can't find anywhere to download it?

I want to make a dvd menu in iMovie because i don't have IDVD and can't find anywhere to download it?
For making DVDs I would recommend iMovie 06 and iDVD 09 both readily available on Amazon or eBay. Shop for iLife 06 and iLife 09.
You can make menus and chapters with any version of iMovie except the latest one. There's nothing wrong with iMovie 11 either but I prefer iMovie 06.
By using iMovie 06 and iDVD 09 I make DVDs with professional moving menus with very little effort. They look almost as good as Hollywood.

Can't figure out how to make a working video in iMovie 6.0.4

So I have a MacBook Pro that was given to me by a friend, and it's from 2006 -- ergo, the older version of iMovie.
My problem is two-pronged. First, let me start out by saying that the videos I'm making just involve inserting an MP3 and a static image (i.e., they are music videos). And, in the end, I want to upload them to YouTube.
Problem #1: when my movies have successfully uploaded (this is something that doesn't happen anymore, as I say below) and I view them on YouTube, the static image I've attached to the video disappears after one second. The rest of the movie is sound with a black screen. This is especially confusing, because I watch the videos in Quicktime and VLC beforehand to make sure that the image if there for 100% of the video, and it always is. I've also made sure to export the image from iPhoto (it was infuriating to find out that 6.0.4 makes it impossible to drag and drop images) and, when applying it, extend its length to the length of the song, which I take from iTunes. See image below for what this looks like.
Problem #2: currently, the videos simply will not upload to YouTube, making me wonder if there is a problem with the way I'm exporting them (even though I have changed nothing in the process since the time they were uploading successfully). I am exporting on Expert Settings, since that's how I did it on my previous laptop (a PowerBook G4 from 2005), and I'm saving the file as a .mov. I've attached a screenshot below showing the specifications of the file.
Thank you for any help.

I'm not very familiar with animation using Photoshop. I have a small amount of experience using Illustrator, but not much. I'm not sure what a normal timeline is.
What I'm trying to do should be very simple. I want to emulate a tv screen flickering on, using 2 white bars that expand outwards from the center of a blackish background.

How to make one movie from different imovie files?

I have 12 imovie files that I am trying to put together as one movie with 12 chapter markers.
How do I do that?
Thanks.

...import all 12 movies in it and mark the chapters...
very hard to imagine a less space consuming way...
you can drop the movies directly into iDVD…
you get a videoDVD with 2x6 (I wouldn't place 12 chapters on a single menu) "chapters"...

How to make a menu structure in iMovie?

Similar Messages

Maybe you are looking for