How to make a midi on apple but it not working on a music band?
idk
Did you configure everything with Apple Midi Setup utility?
Are you getting error messages?
Have you checked the Console log for error messages??
Similar Messages
-
Dear Sir,
I have macpro and iphone 4s. In fact, i tried many many times to make bluetooht is working between them but unfortuantely does not work. also i tried between by ipad and other devices i faced same problem. finally , i think this is factlry problem
please advice about this issue
Regards
AnmarThe iPhone will not connect to the Mac via Bluetooth, as it is not a supported protocol.
http://support.apple.com/kb/HT3647 -
How to preview ENTIRE video (basic question but its not working)
Hi
Ive been fiddling with this for over 2 hours and I cannot for the life of me figure out how to preview the entire video. All I can get are the clips. When I click the source tab it only allows me to select individual clips not the whole track. How on earth do I preview the entire video?
Thank you!
And for bonus marks, is there a way to slim down the sides of the video (there are black bars in the native file) and re-render it? E.g. Change a video from 720x480 to 720x380 but not by shrinking the whole file, but rather trimming the sides (Sony Vegas can do this so Im wondering if Premiere can too)You are most welcome, and glad that it helped.
Craig has addressed how to get another color. [It pays that he's in NZ, and is about 2 days ahead of me in the US... ]
Depending on the effect that you want, you might also consider doing an "abstract" background, rather than a single, flat Color Matte. The choice will depend on what you want to do, and probably also on your material. When faced with vertical images in a "SlideShow," I use this often, and will often use it for all images in a SlideShow. This ARTICLE goes into more detail, just in case you might want to do something similar.
Good luck,
Hunt -
How do put films on your ipod but dose not work
it dose not let me put films on to ipod touch and dosent let put movie for itunes back on my ipod
Coonect the device to the computer it normally syncs with. Select the content desired to sync and sync.
Attempts to sync to a different computer will prompt to wipe the device and replace the media with media from the new library. This is the way iTunes is designed to work. -
How to reset keychain. Tried so many times, not working!
frustrating...i want to reset my keychain password...coz I have forgotten what it is...tried the steps given by apple but still not working!!!!
Help!Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com. -
How to make a song as Apple loop?
Hi there,
I'm working on 'dj mix' and liked to make couple of songs as apple loops.
Dont want to use 'Time and Pitch Machine' as I want to change tempo and see how they mix together...let's say starting mix from 130 and ending up to 138bpm.
I know how to make short files to Apple loops but as long as 6-8min tracks seem to have problem. Cannot select type "loop" in "Add Region to Apple Loops Library" for some reason?
Using PowerPC G5 and logic Pro 7.2.2
Is it possible use Logic Apple loops as Ableton 5 Live is using files?
So much easier to use a tool you have been using last 6 years...
Thanks for your help!i tried this also, but could not get it to work. i got an error message saying that the loop was too long to be an apple loop.
if you get it to work, please post how! -
my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help
Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario -
How to delete my old apple ID? If i want to buy musics or free games in the apps store ,the old ID still show up to sign me but is not working anymore.please help!
Go to settings, iTunes & App Store, tap on your ID, sign out, then sign in with your new information. You cannot delete an old ID, you just stop using it.
-
My apple id is not working to open my icloud on my pc, but my apple id opens.. help?
my apple id is not working to open my icloud on my pc, but my apple id opens.. help?
It depends on how you set up your phone. You can have different Apple IDs for different services; you ID for purchasing can be different that the one you use for iCloud, iMessage, FaceTime, etc.
If you have only one ID for all of these and you have now changed it, you need to make these changes on your phone. To change the ID you use for purchasing from the iTunes and app stores you go to Settings>iTunes & App Stores (or just Settings>Store in iOS 5), tap the ID, sign out, then sign back in with the changed ID and/or password. To change the ID for iMessage you go to Settings>Messages>Send & Receive (or Settings>Messages>Receive At in iOS 5), tap the ID at the top, sign out, then sign back in with the changes. Same for FaceTime by going to Settings>FaceTime.
To a different ID for iCloud your go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your new ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account. -
My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?
lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken! -
iCloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?
Firefox also makes regular backups of your bookmarks in a folder named bookmarkbackups in your personal settings folder. You can restore the backup to your new Firefox, but unlike importing the HTML-format file, it is a complete drop-in replacement, so if you have saved new bookmarks you do not want to lose, the export/import method may work better for you.
By default, Windows hides your personal settings folder so the easiest way to access it is from inside Firefox. You can use either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This will launch a window showing your Firefox settings files.
You might want to back up this whole folder if you have other data you want to preserve from your XP computer.
Either way, you should find the bookmarkbackups folder here and when you click into it, find maybe 10 files with dates in their names.
The procedure to restore the file once you have it on removable media or some other convenient place is described in this article: [[Restore bookmarks from backup or move them to another computer]].
Regarding the other files and what you might find of use: [[Recovering important data from an old profile]]. -
My camera is working but does not work on skype how do I turn the camera on for Skype
My camer is working but does not work on skype how do I turn the camera on.
See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4 -
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
HT204053 my apple id is not working on my iPhone. how do i change my apple id on my other devices?
My Apple ID is not working on my iphone and iclouds. how do i fit it?
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again. -
What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Client Copy between unicode system and non-unicode system
Hello, we have to build up a new system for japan. It is planned to install a new 4.7Ext200 unicode system and then make a client copy from a non-unicode 4.7Ext200 (language= german, english) system to the unicode system. I don't think that this is p
-
MBean calling ejb class loading issue
Hi, I would like to have an mbean call an ejb. I have come against a (predictable!!) class loading problem. The EJB Home cant be bundled with the mbean because the mbean class loader would load the interface, preventing ejb reload( Thats what the err
-
I just bought the new Linkin Park album but one of the songs doesn't work when I choose to play it. It doesn't load up to play, doesn't show the album artwork, and never starts to play. Plus when I listened to the album all the way through, track by
-
Should I be clearing my history and cookies? My I pad just started giving me the "could not open page" message and I am not sure why. Not very computer literate.
-
Please Please help with JavaScript and Actions
Hello! Is there a way to perform a saved Action from the Action Pallette using a JavaScript script? I know there is a way to do it with Visual Basic. Is there a way to run a Visual Basic script from a JavaScript script?(which could be a potential wor