How to make a Mix cd?

Looks like everyone has good info here. Im a DJ and I was wondering how or if i can make a Mix CD. So where people can skip the tracks if they don't want to listen to that specific track? Can I make like a 20 track CD? Let me know
Wolf

Wolfgang:
I hate to admit this but back in the old days when I used to spin and wanted to burn a nonstop CD with track breaks, I was forced to use a PC and a program (that I think Sony eventually took over) called "CD Architect."
I think unless people spin records and want to capture their set digitally, they have no idea of what you're talking about when you try to explain what type of CD you want to make. And depending on whether you want to set the marker as the overlay begins (think back to the spirals on vinyl that indicated the breaks, lol) or exactly at the point where the next song mixes in on the downbeat, you have the freedom to do as you choose.
I used to record 80 minutes and then take that software and insert track breaks and it would burn individual tracks to CD from within the program itself.
You could apply effects to the individual tracks or the master track as a whole and end up with a fully mastered Redbook CD with awesome quality.
I'm not sure GB is able to do this, but maybe it will be added as a feature in the future. Good luck!

Similar Messages

How to make genius mix an actual playlist ...

...that I can put onto my Nano?

Depending on your issue, making an appoint will be offered as an option by choosing "Take in for Service" (see http://www.macrumors.com/2014/11/07/apple-genius-bar-online/). Of course, you could also just try calling your local Apple store.

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

How to make a decent surround mix?

I've never used STP, but I'm hoping you experts can help. I've posted this question in the FCP forum but got no respsonse. So I did a little more searching and realized this might be a better place for the question.
My goal is to take two-channel HD video, add a stereo music track, and produce something that sounds good in full surround. Is there any good tutorial on how I might make a modestly better surround mix? I'm not trying to win an Oscar here, or become a sound engineer. So simpler is better, please.
I've worked out a way to put surround sound into my HD movie, burn it to a DVD AVCHD using Toast, and get it all to play on a blu-ray player, Cool!! It looks great and has 5.1 Dolby Digital surround, all on a cheap DVD disk. I get about 30 minutes on the disk.
But now I realize I don't know jack about how to make it sound good. All I've tried so far is putting a stereo song into the surround speakers with the movie stereo in the fronts as usual. It's pretty cool, but it isn't exactly "immersive".
I think I might get a better result using an upmixing tool such as Upmix 1.1.1 from Cycling '74 (or is it KVR Audio?) to simulate 3D sound from my 2D source materials.
Has anyone tried something like this? Is it worth the bother? Any tips appreciated.

My surround experiments test results:
Content: Two stereo tracks, a movie and a song.
Objective: Make a nice surround mix, something better than sending both tracks only to the fronts
Tools: Soundtrack Pro, Compressor 2.3.1 I have no system for "live" surround playback and no software designed to simplify front-rear fades and 3D sound placement. To test any mix, I have to burn it to disk and preview it on my (calibrated 7.1) home theater system.
*Hold Fixed:* No change was made to the stereo pan of either stereo pair. In all tests I let Compressor create a center mix at -3dB and a LFE using its low-pass filter checkbox.
*Experimental Design:* I have just four levers to pull - the level of each stereo pair in the front and in the rear. To simply testing, I used just 3 levels, 0 dB (no change), -3 dB and off, -∞. Four variables at 3 levels gives you 81 total combinations. Since I have to burn to disk, I can't run all those. Many tests can be eliminated as nonsensical, eg. the one test with all levels at -∞. Further eliminating the combinations that give level totals that are obviously too low or too extreme, I was left with 8 mixes I actually tested:
Movie Music
_F / R F/R Comment_
1. 0 -∞ -∞ 0 Uncomfortable, too "obvious"
2. -3 0 0 0 music a little dominant
3. -3 0 0 -3 music too front
4. 0 -3 0 0 not bad, music more forward than #6
5. 0 0 0 -3 music too front
6. 0 -3 -3 0 my favorite - very smooth transition when music starts
7. 0 0 -3 0 music too rear, oddly
8. 0 0 0 0 result pending
Conclusion: It's possible to make a dramatically improved sound mix over the two-channel stereo that is exported by iMovie. A starting point is simply duplicating the front signal into the surround speakers. A slight fade - in my case the movie was reduced in the rear and music reduced in the front - gives a nice "opening" of the sound and some sense of 3D. I believe this preset could be applied blindly to many movie+music projects and give an acceptable result.

How to make the swing drawings to appear in a specific jPanel?

hi,
I have a frame which I divided in two panels - one for the jComboBoxes/buttons and the other one for showing graphics. but the paint(Graphics g) overpaints it all =(
how should my code look like if I want some rectangles (depending on the combo choices and on button click which means update) to appear in the second panel?
the code's structure is like :
import *;
public class NewJFrame extends javax.swing.JFrame {
     private JPanel jPanel1;
public static void main(String[] args) {
          NewJFrame inst = new NewJFrame();
          inst.setVisible(true);
     public NewJFrame() {
          super();
          initGUI();
     public void paint(Graphics g) {
          g.fillRect (x, y, w, z)
     private void initGUI() {
          jPanel1 = new JPanel();
               // combo boxes and buttons
               // action listeners for them
          jPanel2 = new JPanel();
               // the place where the rectangles should be shown
               // and updated if combos are changed and button clicked
}now, I wonder if anyone could possibly give me a hint how to make it correctly, because I'm really a total newb in Java and I can't find any good examples from www which I've search through for the solution.
P.S. is there a plug-in for eclipse for visual programming of the graphics? =)
thank You for the kindest help!
J.M.

You should not be mixing AWT and Swing component in
a Swing application, so don't use a Canvas.
If you need some custom painting then you should
override the paintComponent() method of JComponent or
JPanel and then add this component to the GUIwhat does mean the override the paintComponent() method of JComponent or JPanel?
how can I add that component to the GUI?
=)
can you give a short code example, please! the code structure would be more than enough.
J.

How to make a gradient on two paths

Hello,
I am fairly new to Illustrator, although have used Photoshop, Fireworks and DW to some degree in the past.
In CS4, I am trying to make a country map with different counties or states. Using the map of the UK and including Wales, Scotland, and some of the counties as an example. I need to portray the whole country, but only highlight a specific part of the land, along a train line and so quickly fade away to almost transparent in the further edges.
Using the pen tool I have traced the country and county borders as paths. I then used the fill tool to make each country, or sea, a different colour. Now I want to fade the edges of my map away to transparent to bring attention to the middle. I have drawn another path on top and beyond the edge of the artwork and tried to make a transparency overlay and gradient in this path to make it fade to the edges. However, this does not work as I had hoped for three reasons.
1) the darkest edge of my 'fade path' does not blend into the country below but is quite an obvious line.
2) the gradient is a different colour as it sits on top of other paths of different colours.
3) the gradient is linear, from top to north, of radial, from a certain spot. I need the gradient to flow out in all directions from a un-uniform 'blob' roughly in the middle.
Can you please tell me how I can achieve my aim?
3) I had one more query when tracing my map ... I have two shapes and the paths align along one edge, think of the south border of Scotland, and the north border of England for example. At the moment I have these two paths running alongside each other but not joined. So if I didn't draw my pen accurately, there are small pockets where they don't touch. Ideally I would like to borrow the other path line for a time then leave it as it continues on it's own route.
Sorry if I mixed up the terms, I hope you can understand me.
Hope you can advise which tools I should be using, or some tutorials I can follow?
Thanks in advance.

Thanks Mylenium. I've certainly learnt something from both replies. I have now finished tracing the countries using your paste and cut method. It was quite a tedious job! I also found using the lasso tool and direct selecion tool that I could highlight just the area that bordered the next county/country. My the latter stages I had to select multiples, join them and then add, delete more anchor points. I'm sure there must be an easier way to trace an image!
I tried the live trace, but the map I was using was too detailed it traced geography and not the borders. Anyway, I'm there now. Thanks for the advice.
I think I'm on the wrong track with the 'blob'. I didn't mean the blob tool on AI, but was referring to the middle content of my map following the railway line, which is the bit I wanted to 'stand out' from the rest. I have perservered and think I'm getting somewhere with the gradients.
Thanks also Skullmaster for the idea of gradient. It wasn't working how I need, but from your link I found how to make a 'transparent opacity mask' which I have used with a photo in the background to some effect.
It is a feature rich software and hard to know what to look for when I'm not sure of the terms. Unfortunately I have a deadline for what I'm doing and this map is only a small part of it. It will have to remain a work in progress as I slowly learn more techniques.
I'm sure I'll be back with more ...

How to make the Internal numbering as Alpha-Numeric

Hi,
In the Document Info Record, the Internal numbering is always numeric.
How to make it Alpha-Numeric?
Regards,
Shashi

Dear Shashidhar,
Number assignment is derived from Document Type of the DIR. You can customise the Document type settings (DC10) to make the number range as External or Mixed.
Modify the settings in "Number Assgmt" tab as 2 for only external number assignement and 3 for mixed number assignment.
Hope this solves your question.
Regards,
Sudharshan

How to make the inputs appear in Playback

Hi,
I would like to know how to make the inputs (line-in, mic, SPDIF-in) appear in playback of windows's mixer ?
Im running XP pro sp3 with XFI Extreme Audio PCI-Express.
I dont know why but there is no inputs in playback that making me unable to hear it while its being recorded.
<img border="0" height="405" width="640" src="http://img70.imageshack.us/img70/672/mixergq0.png">
<img border="0" height="542" width="640" src="http://img399.imageshack.us/img399/486/allmysettingsmq2.png">
Message Edited by Nuja on 0-06-2009 2:07 [email protected]

- I've read a little more and come to these conclusions:
. The instructions presume that a CD is included with the card for the purpose of installing the software. A CD/DVD reader is a requirement for this reason.
2. The card uses Intel HD Audio. This changes enough of what I know about CL's card that I really don't know that the lack of external inputs in the playback mixer is not intentional and uni'versal. A recording application could let you listen to what is being recorded by having an option of playing back what's being recorded.
I have enough uncertainty now that I don't think it's useful for me to continue commenting. If someone who has a? PCI Express X-Fi Xtreme Audio that came with the software CD and hard-copy documentation wishes to share whether or not they have line-in, etc. in the playback mixer, it could be useful.
-Dave
?[email protected]

How to make enhanced fields of data source delta enabled?

Hi ,
I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled. I have tested these fields from R/3 side using BDCP, CDPOS tables. All the fields are writing the changes correctly. But when extracting them using delta they are not capturing.If we load the full,it is capturing all the changes.
So running full load every week is taking more time.
Can any one suggest how to make this fileds delta enabled to capture the change in BW side as well to extract only changed records?
Any help will be greatly appriciated !
Thanks & Regards,
Vishnu

HI,
It is not possible to load delta this data. Your datasource only detects changes in the customer table and when any customer has been modified the record is loaded to BW. In this moment the datasource fill the append extructure.
The problem is that if you modifies some record from the append extructure the datasources doesn't detects the changes. When you does a full load you are filling the append extructure for the entire records and it works.
If you want to catch this deltas you should make a delta datasource for CDPOS but depending on the number of records of the tables it won't be possible.
You could check if there is any event to detects the modification and create a delta queue datasource for the append extructure.
Then, you can mix both datasources in a DSO in BW.
You can look for a " how to create generic datasources which use delta queue"
I hope it helps

How to make a Shared mailbox folder appear on everyones mailbox automatically

Hello, I need to find a way for a Shared mailbox
folder to appear in everyone’s mailbox automatically – preferably in their favorites. We currently have a Public Folder where everyone in the company can drag or email any suspicious, fishing, etc.
emails. Unfortunately that is not good enough for our company's upper management. They
wants me to find a way to add a folder on everyone’s mailbox so they can easily find it under their favorites and drag any questionable messages to it.
I created a Shared mailbox for this purpose and a folder and I gave everyone access to it. Now
I’m not sure how to make this folder appear automatically in everyone’s mailbox favorites. If there is a way to accomplish this I would appreciate any suggestions. I wonder if there is a
powershellcmdlet that can help me do this. Any assistance will be greatly appreciated. For now we are running on a mix environment Exchange 2010/2013, but pretty soon it will be 2013 only. Thanks in advance for your assistance.

I wouldn't recommend this method, trust me this might become mess if doesn't go to right direction. People might use this shared mailbox for their
own use. Best practice is to create a shared mailbox with some sensible name like [email protected] or
something like that and then share it on the announcement board or send an announcement mail to all users and ask them to forward their spam, suspicious, fishing mails to this address.

How to make table that will include controls such as drop list?

How to make table that will include controls such as drop list?
I need to create table as Property Browser of ActiveX, that include rows with differnt types such as drop list, color, ...

Hi Nadav,
I figured out where I missed your point. When you wrote
table as Property Browser of ActiveX, that include rows with differnt types such as drop list, color, ...
I was thinking mixed data-types in a [2d] table!
Looking at the property browser again it looks like no single LV function can do all of that. It can be developed as a pop-up (like the browser is set-up) and then code all of the elegance using an event structure to control the background color of a string indicator while controling the visability of rings that are only made visable when a mouse down is detected. That will get you pretty close.
So no, my previous response ws not correct for what you are trying to do if you want to duplicate all of the wistles and bells of the property browser pop-up window.
Please forgive my distraction.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to make the calculation or formula in bottom of the coloum

How to make the calculation or formula in bottom of the coloum in Discoverer report.
Regadrs
Manikandan

Hi Ros
You have a couple of issues, one that is simple to resolve and one that is not so simple.
First, the simple one - the word TOTAL. To alter the word that Discoverer inserts next to a total, or to even remove the word altogether, use this workflow:
1. Right-click on the total and from the pop-up menu select Edit Total
2. At the bottom right-hand corner of the Edit Total dialog box is the area where the label is maintained. You will see a checkbox for the label
3. If you uncheck the label you can change the label to anything you like, including nothing
4. After you have set the label, click OK and close the Edit Total dialog box
Note: In Desktop, this is done via a drop-down from the Total dialog box. If you click the drop-down, the last item in the list is called Generate Label Automatically. If you uncheck this you can create your own label.
Your second issue concerning the non-totaling of the grand total on some items means that there is something preventing one or more of the totals from calculating. First of all, try to determine which item or items is causing the problem by adding individual totals to each of the desired columns. You will eventually find the column which has the culprit. If you use the above workflow to suppress the display of any labels your total line will look as though you have totaled all items.
Next, having found the column that will not total, try to figure out why the values will not add up. Could the column be a calculated item? If so, it is possible that you have used SUM on the outside of the calculation, like this:
SUM(some item - some other item) - this will not total if the original items themselves are in the query and are also being summed. This is because you are mixing aggregate and detail items within the total.
Try changing the formula like this:
SUM(some item) - SUM(some other item) and see if this helps.
If this is not the cause then try changing the formula for that column's total to CELL SUM instead of SUM. This causes Discoverer to literally add the values in the column.
If this is not the cause, could you possibly be trying to total repeated values? By default, this is disabled in the later versions of Discoverer. The repeated values will be caused if you have multiple joins in your query and the item that you are totaling is from the many end of a one to many relationship. Suppose you had items from a header table and line table in the same worksheet with there being multiple lines for the same header, and now let's say you have a column which is returning something from the header. That value will get repeated and if you try to total it would generate the wrong answer, hence out of the box Discoverer is trying to protect you from yourself.
However, it could be that the column really should be totaled but because Discoverer has detected a one to many join it will not total that column. To prove that this is the reason, change the join from a one to many to a one to one. Don't worry, this won't stop the query from working. If this allows the total to work then you can either leave the join as it is with a one to one, which won't harm Discoverer or you can edit the pref.txt on the server and change one of the preferences.
The preference I would change is called AllowAggregationOverRepeatedValues. By default this is disabled and will be set to 0. Changing this to a 1 will now tell Discoverer that repeated values can now be totaled. Don't forget to apply the preferences correctly by execiting applypreferences.bat, on Windows or applypreferences.sh, in Linux or Unix, and then stopping and restarting the Discoverer server.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

How to make a valve in control editor?

I want to make a control function in Labview5.0,but I don't know how to make it,for example I will make a valve that is a control funtion,how to make it properly

If you were to go to Search Examples>Demonstrations>Process Control>Control Mixer Process, you'll find a VI with several custom controls including a valve. All it is is a boolean with custom images. To make your own, use a drawing program like Paint and make images of your valve in the open and closed state. Place a boolean control on a VI's front panel and choose Edit Control from the Edit menu. Once in the control editor go to customize mode. Choose Import Picture From File from the Edit menu. Right click the boolean control and choose Picture Item to Replace to determine which picture to replace with the one from file (a boolean actually uses 4 pictures but you only need to replace the first two which are the true and false states). Right click again and
choose either Import Picture or Import at Same Size. Repeat for the other boolean state with a different picture. You should save your changes as a .ctl so that you can easily use it again.

How to make a song as Apple loop?

Hi there,
I'm working on 'dj mix' and liked to make couple of songs as apple loops.
Dont want to use 'Time and Pitch Machine' as I want to change tempo and see how they mix together...let's say starting mix from 130 and ending up to 138bpm.
I know how to make short files to Apple loops but as long as 6-8min tracks seem to have problem. Cannot select type "loop" in "Add Region to Apple Loops Library" for some reason?
Using PowerPC G5 and logic Pro 7.2.2
Is it possible use Logic Apple loops as Ableton 5 Live is using files?
So much easier to use a tool you have been using last 6 years...
Thanks for your help!

i tried this also, but could not get it to work. i got an error message saying that the loop was too long to be an apple loop.
if you get it to work, please post how!

How to make it sound as if it is in the next room.

I am new to the audio editing/mixing.
I am curious how to make dialog sound as if it is happening in the next room.
I vaguely remember a setting that was doing something like it and it was actually called similarly (In the next room), but now I can't find it.
If it doesn't exist and it was one of those borscht induced nightmares, how one would approach this anyway?
Thanks a lot in advance.

In the effects rack, there are several "room" settings you can apply, and tweak the parameters to make it sound as if it's in the same room or next door.

How to make a Mix cd?

Similar Messages

Maybe you are looking for