How to make a mpeg4 video file with an .avi extention

Can anybody tell me how to do this with Quicktime Pro, Final Cut Pro, or something else?
Thanks.

Hi All,
What I thought to develop is to write a JDBC connection in the Stan-alone PDF template and access database.
example: PDF is designed in such a way that it should have "USERNAME" , "PASSWORD" , "LOGIN BUTTON" , so that PDF stand-alone template on every desktop should access the database on entering the correct credentials.
is it possible..?
if possible , please provite the solution..?

Similar Messages

How to properly sync own video files with played / unplayed state?

Since iOS7 (I think) the Videos app on iOS is no longer showing the "unplayed" blue dot next to a movie files that I have added manually to iTunes.
In old iTunes versions, at least iTunes showed me inside the library view which movie files had been played with the blue dot.
Now with the Yosemite Upgrade and new iTunes, when I go to "Movies" (left hand side icon) then on the middle section on "Home Videos" then I get my old listing of video files, but there is no played/unplayed state icon. There is a column "Plays" and "Last Played", but those do not indicate if the video was watched fully or only just a second of it.
When going to my iPhone sync view however, the seen/unseed blue dots do show up. But in that view, I cannot delete video files. Usually I delete videos files after I watched them, and currently it is impossible for me to delete the video files, as I cannot see which ones are seen. Plus, on the iOS Video app in iOS 8.1, I still cannot see which videos were played - on top of that, when I delete a video file from there, and sync my iphone, it actually copies the video file to the iPhone again :-(
Any thoughts, apart from "Dude you have a wacked workflow"? ;-)

Hi,
in relation to on to the above could you please share some thoughts on using AUSST in an enterprise environment spread over 50 countries i relation how to setup the AUSST, taking WAN Lines into considerations. We are using SCCM for application deployment and patching. Is there a comparising model for AUSST vs. SCCM?
i Get the picture using AUSST in a company with one huge Building using the LAN capacity, but what technologies are used to replicate over WAN etc?
br
Twinkle6862

How do I replace one video file with another

Hey all
I'm new to Imovie, so please bare over with me.
I made a long movie using a MOD format file from my JVC home camera
When I where to convert or burn the movie in Imovie it made an error.
After much trouble I found out that it was the MOD format that was the problem
So I bought an expensive piece of software that converted the MOD file to MOV:
And with a new test project it now works flawless...
Anyways back to the original project and the problem:
- I have now converted the original MOD file to MOV
- I have the original Imovie project with the MOD file.
How do I replace the mod file in the imovie project with the new mov file, while keeping, that is transfering all my work on the mod file over to the new mov file?
Thnx
Kris

• In the Layers Panel draw the Layer’s Vector Mask icon onto the trashcan-icon
• move that Layer above the new Text Layer
• invoke Create Clipping Mask (command-alt-G) from Layers Panel’s fly-out menu or alt-click on the line separating the two Layers’ icons

How can i get a video file with subtitle out of DVD Studio Pro?

i got a project for a dvd in dvd studio pro. There are subtitles which i created within dvd studio pro.
Now i want make a web version of the video with the subtitle, how can i get to this?

Hi Mr. Cutter,
There is an app called "D-Subtitler for Mac" (as well as several others)
which should allow you to extract the subtitles from a copy of the
finished dvd and use them otherwise.
It's been awhile since I had to do it but it is a fairly common need
so the software exists.
J>H<L

How to make a single PDF file with pages for each Invoice (XML/XPD)

I appologize, this is my first time doing this so try not to assume too much when responding.
I have designed an invoice form in LiveCycle Designer and have it properly connected to an XPD feed that is dynamically created with PHP. When the user opens the URL, the invoice they selected shows up perfectly in the PDF. Yeah!!!
Now the problem, they want to have multiple invoices show up in the PDF as their own "pages" in a single PDF document. Page 1 = Invoice 1001, Page 2 = Invoice 1002...etc.
The XML scheme is something like the following. A single header with a variable number of detail lines.
form1
header
invoice_id
invoice_date
etc...
/header
details
detail
item_descr
item_qty
item_price
detail
detail
item_descr
item_qty
item_price
detail
detail
item_descr
item_qty
item_price
detail
/details
/form1
Now I figure this is a simple matter of replicating the invoice XML in the XPD that is generated, but no matter which way I do it, I only get a single page.
Is there something I need to do in the form in LiveCycle that tells it to produce multiple pages if I give it multiple "records"?
Does that make sense?
BTW...I'm not using a FormServer or anything else. Just simple XPD dynamically created with PHP that points to a PDF created with LiveCycle.
Any help would be very much appreciated. Again...assume I'm a newbie...

Hi All,
What I thought to develop is to write a JDBC connection in the Stan-alone PDF template and access database.
example: PDF is designed in such a way that it should have "USERNAME" , "PASSWORD" , "LOGIN BUTTON" , so that PDF stand-alone template on every desktop should access the database on entering the correct credentials.
is it possible..?
if possible , please provite the solution..?

How do i make a still image (photo) fit the length of the music? I record music and want to put the tracks to a video file with a still image of my business logo in the background. Any help?

How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?

Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
See this iMovie Help topic:
http://help.apple.com/imovie/#mov3a883915
You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
John
Message was edited by: John Cogdell - added Note

How can i make a picture from a video file with final cut pro x?

how can i make a picture from a video file with final cut pro x?

Go to the "share" menu, select "save current frame"

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

How do you convert the audio from a mpeg4 video file to mp3?

How do you convert the audio from a mpeg4 video file to mp3 format?

Probably the easiest way to do this is to download a free media convertor. Most will be able to convert video into audio files.

FCPX, How do I reconnect a video file that has been modified or over written?

FCPX, How do I reconnect a video file that has been modified or over written?
As an animator, I am constantly modifying and overwriting movies files that have already been imported into the Final Cut time line. In FCP7, I could easily modify and update movie files and have those changes appear in the timeline without the need to reimport and re-edit those clips, but FCPX seems to lose it's connection with any modified or overwritten file, making all the editing work I've done to these files worthless.
Does anyone know of a way to reconnect to a modified or overwritten file? Because, this one single issue makes FCPX completely worthless to me.
Andy Murdock

If you import the new clip , select it and drag over the old offline clip , you can choose from the menu ...

How would I sync MPEG4 videos to the iPad

How would I sync MPEG4 videos to the iPad

As long as they meet the iPad's supported video formats then you should be able to sync them via iTunes. From http://www.apple.com/ipad/specs/ :
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
If you can't get them into iTunes then you can use something like Handbrake to convert them into a supported format. If you can get them into iTunes but they then won't sync to the iPad then try Advanced > Create iPad Version in iTunes and then try syncing that version.

How do I import my video files from old iPhoto - in time machine - to new iPhoto? Photoes came across, video said incompatible.

how do I import my video files from old iPhoto - in time machine - to new iPhoto? Photoes came across, video said incompatible.
i have moved from a mac pro to a mac mini,
Mini now has mavericks and latest iLife stuff, I clicked import, was all good, then at end, no videos came across.
Is Mavericks,/iPhoto having a compatibiltiy issue with some video formats....???
Your help is appreciated gang.: )

Please describe exactly what you did. In moving to a new machine no importing is involved. The best way is to simply connect the two computers together and drag the iPhoto library from the old one to the pictures folder go the new one and launch iPhoto
LN

How do I edit a PDF file with Adobe PDF Pack?

How do I edit a PDF file with Adobe PDF Pack?

Well, you don't. Editing a PDF is a difficult and fraught business even with the most expensive software.
But PDF Pack lets you export to Word; then often you can edit in Word. Now you can make a new PDF. It might look like the original, or it might not. If small changes matter you might be out of luck. ON NO ACCOUNT USE THIS FOR GOVERNMENT FORMS.

How do I open an iWeb file with Texteditor?

How do I open an iWeb file with Texteditor? I want to embed a midi file but I don't see any of the iWeb files under my document folder. Where are they and how do I open them in Texteditor? Thanks!

first you have to publish the site. If you publish to idisk you can find the html files there and edit them there. If you publish to a folder find the file within that folder.
you can use textedit, but check the help files to make sure you configured it properly for html.
be aware you would have to edit the html file each time you republish the edited page.
good luck

How can I capture AVHDC video files from Panasonic HD video camera??

I just received a Panasonic HS300 video camera and can't copy the video files on my computer.
I see several files in the CAM_HDD camera folder on the desktop. But the only relevant files for me to copy are the JPG photos. I don't see any video files.
In the specs of the camera they write that I should have a Mac with an Intel processor. Is that the problem???
I even tried to copy the files on a PC (I succeeded) and then brought them on my computer with a USB stick. It didn't work: again, the only relevant files that I could see were the JPG, no trace of any video (but they were indeed on that USB stick!!).
How can I access those video files and use them in Final Cut Pro, or even iMovie??
I'm becoming afraid that i won't be able to use that camera unless I buy a new Mac now!!!
thanks!

you need this: http://www.shedworx.com/voltaichd
the native iMovie / FC AVCHD codecs are only for Intel Macs, the format is a highly compressed HD format which needs to be unpacked & converted for use.
The powerbook may not be up to editing these files. expect a slow process of exporting & working with the footage.
Message was edited by: kmac1036

How to make a mpeg4 video file with an .avi extention

Similar Messages

Maybe you are looking for