How to make a myRIO as a standalone device?

Hey,
Greetings!
I'm working with NI myRIO for my project. I just want to know how to make the myRIO as standalone device. Please let me know the procedures for the same.
Thanks in Advance. Looking forward for the helping hand.

check this video
https://www.youtube.com/watch?v=JXoJECRS-eo&feature=youtu.be

Similar Messages

How to make a driver using DLL in LabVIEW?

I had followed the "Using Exteranal Code in LabVIEW" manual having finished the making dll file, and the lsb file(I attempted that two ways). But when I load the code in LabVIEW, it can't work. I don't know what had happened, I only got a error message like this:"'0x100014f1'commond call memory'0x00000000',this memory can't be written" or other similar error message, if I push the "enter" button, the vi application which I having lunched will crash. If I push the "cancel" button, the debug model will start,and the next message is "Unhandle exception in LabVIEW.exe(MSVCRTD.DLL/LVS95.TMP/COUNTER.DLL(the last one is creat by myself)):0xC0000005:Access Violation", but I wonder what had cause this? My DLL had been made successf
ully under the VC++6.0, why LabVIEW can't call it fluently? How to make a driver for my own device using LabVIEW? How to correct my error to finished my hole work? Thank you very much. Jacky Wei
Attachments:
counter1.rar ‏33 KB

1. Can you call this DLL from within VC?
2. What operation system do you use? There may be a problem with calling of win95 dll under NT or win2000 for example.
3. If you use NT you may not have permissions to work with some ports and memory areas.
4. Under NT or win200 try to compile the library as a 32-bit dll, and under win95 - as 16-bit one.
Good luck.
Oleg Chutko

How to make BBSAK able to detect 9860 - White Screen

Hi Guys
Need serious help here. My 9860 (7.0) is showing 'white screen'. It happened since I tried to reload OS using BBSAK. Seems I choose wrong menu. As adviced by an expert, I have to wipe it again to see 507 error code. I tried to wipe it through BBSAK but Unfortunately BBSAK didn't detected the device anymore.
My question is: How to make BBSAK able to detect my device.
The situation are as follow:
1. BB Desktop Manager & Apploader detected my device (means USB driver are installed correctly & using OEM USB cables and good USB Port.). Trying to reload OS through these apps still stacked at the white screen (75%), same as through web uploader.
2. Already uninstall and reinstall BBSAK, Rrestore my laptop system, modify compatibility program of BBSAK, and tricks in windows task manager to avoid conflict between BBDM and BBSAK, still failed.
3. Clean Uninstall BBDM and BB Link and reinstall BBDM 7.0 Version only (BBDM 7.1 seems not reliable-for me).
4. Tried to wipe using JL_Cmder & Vnbbutils, both didn't execute wipe process.
5. Registry Cleaner using CCleaner.
Additional info: BBSAK detected my 9860 once when I was using BBDM 7.0 but since I upgraded to BBDM 7.1, it didn't detected anymore, so I had removed BBDM 7.1 and reinstall BBDM 7.0.
The result is: BBSAK still didn't detect my 9860.
Helps will be greatly appreciated. Thanks in advance for your time & effort.
Regards,
Arthur.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

When I do that it only makes a short portion (the top video) color somehow it shortens the clip to 2 seconds, I tried to edit for the full 47 second clip (just a sample to play with) but it keeps going back to 2 seconds for the top video.
Any other ideas? I do have Final Cut Pro as well as Adobe After Effects as well, but I just figured iMovie would be easiest way to do this simple effect...

How to make CompactRIO truly standalone?

Hi,
I am new to cRIO and I am using it for motion control. What do we need to do to make cRIO run as a standalone system? That is, my motion control system can run with just the cRIO (or perhaps together with an extra external control panel for monitoring) connected. This is because I find that I need the the computer to run the host vi to control my system; how do I program my fpga vi or host vi to achieve such a function?
I am quite lost in this part, so many thanks in advance.
*attached is a sample host vi.
Attachments:
Force Ctrl Trial v0 (Host).vi ‏166 KB

Thanks Richard,
Your previous post has been very useful. However, I still have some problems building my standalone application. I just need some hints to get started.
For example:
a.) Under the "Tools>>Build Application or Shared Library>>Source Files" , do I use my HOST VIs(as top level VI) or FPGA VIs(as dynamic VI)?
b.) Do I need to make any modifications to my program which uses the PC to run the host VI before it is downloaded to my cRIO-9101?
c.) Are there any example codes or application on building standalone applications available? I have searched NI.com but could not find relevant ones.
I am currently using LabVIEW 7.1 with FPGA module 1.1, NI-RIO and Real-Time Module (ETS) installed. I have cRIO-9125, 9263 and 9411. attached are some programs i experimented with - programs speaks a thousand words.
Thank you
Bing
[email protected]
Message Edited by GoodManBing on 01-13-2006 12:13 PM
Message Edited by GoodManBing on 01-13-2006 12:15 PM
Message Edited by GoodManBing on 01-13-2006 12:18 PM
Attachments:
force ctrl test v22.vi ‏722 KB
force ctrl test v22 (host).vi ‏223 KB

How to create storage locations in a standalone scenario??

Hello everybody,
I need some help. I'm working with SRM 5.0. I'm making a standalone scenario. When I created the organizational plan, in the check tab, a error appears. The message is: "Define the attribute LAG". The attribute LAG is the storage location, in the extended attributes tab. I've tried defining this attribute but I couldn't.
Does anybody know how to create storage locations in a standalone scenario??
Thanks
Iván Moreno

Hi Ivan,
Look at this thread:
Creating Plants & Locations - Standalone Scenario
Storage loc is useless in a standalone scenario.
The "Check" tab makes a generic check on attributes needed for each business scenario, but does not check the integration scenario.
So you can get rid of this error message.
You can even deactivate this check on this particular attribute in table BBPV_APPL (SM30), for Confirmation & SC applications.
Rgds
Christophe

ECC 6.0 Upgrade - Lot of Custom Objects - How to make it work ???

Hi ,
My client is on HR 4.6c and ESS in standalone ITS and upgrading to ECC 6.0 and EP7. They have lot of custom objects ( Reports, ABAP Queries, Function Modules etc., ) and lot of customization done in ESS ( Std tcodes copied and developed ESS services in ITS). What is the approach to be followed to upgrade these custom objects/transactions into ECC 6.0? Once up gradation done, Is there any changes to be done either in EP 7 side or R/3 side ( ECC 6 ) in order to call those z tcodes in EP7 ( ESS )?
Client is happy with the current functionality in ESS ( ITS ) , wanted to use the same functionality in new system. Any clue on how to make use of those Z transactions useful in ECC 6? Can we call these transactions in ESS in EP7? Your response will be highly appreciated. Example: For open enrollment, instead of std PZ14 , they have copied and developed their own transaction to use in ESS ( 4.6c ). The same one should also work in EP7 and ECC 6.
Rgds
Peddi

Prakash,
Thank you for your reply. But we have custom transactions( Screen based , module pool ) used in 4.6C, ESS ( ITS), What are the changes we may have to make potentially to work those programs from EP7 ESS.
What are the changes you suggest to make in R/3 ECC6 ( after upgrade )and also EP7 side ( Like crating custom I Views would be a best bet ? )
Peddi

How to make my first website in Coldfusion Builder

Hi everyone,
Here is my problem that I really need help with.
Context:
I just moved from Dreamveawer to Coldfusion Builder. I want to:
-> Set up my first server
-> Creating an SQL DB on the server
-> Create an index page and display query results
When I started CF builder, i watched the videos on 'Getting Started ' screen. But my things didn't go as smooth as that of the guy in the video. After setting up the server I sometimes cannot start the server and sometimes the server starts but I can't access the CF Admin page (I couldn't access the admin page even once).
Question(s):
Does CF Builder installer also include Coldfusion setup or I have to install Coldfusion prior to installing the CF Builder?
Is there any way of getting details about all the fields that I fill in during installation of Coldfusion/CF Builder, so I know what I am filling instead of just blindly following that dumb guy in the video
Other Info:
I am using Win7 64bit
Installed Coldfusion9
Installed CF Builder2 (standalone)
P.S.
I already watched these videos but they didn't work for me:
-> http://tv.adobe.com/watch/adc-presents/getting-started-with-coldfusion-builder-2/
-> The video on CF Builder2 start screen

Thanks for clarifying. Terry is a good guy. Glad you didn't mean him
It is likely that when you installed ColdFusion you selected the "Server Configuration" (because you would know it if you did not). The other two options are quite complicated. You can verify this just by answering this question. Do you access ColdFusion via port 8500. If so, then you are using the Server Configuration.
This means that your webroot is probably located at c:\ColdFusion9\wwwroot
If you installed ColdFusion to a different location (like D:\) then you should be able to just make that change above.
Change your workspace in CFBuilder (FILE >> Switch Workspace) to point to that wwwroot directory, then recreate your project and try it again.
There are other ways of handling most of this. But this is probably the easiest.
And trust me, when it comes to teaching, it's hard to please everyone. ColdFusion Builders target audience is likely experienced CF developers. Of course n00bs can use it too, but I am sure when they created those videos there interest was in getting existng CF developers on board. I teach a server-side programming course at the college level and it can be very hard teaching the IDE and the Server software at the same time. And I can see people struggling with figuring out the differences in terminology and technology.
Where does the IDE stop and the server begin?
I got an error, is the problem in CF or CFB?
CFB says I have an error, but my code still runs, I don't understand.
It's a tough line to cross. I am sure Adobe would be interested in hearing your feedback on how to make the training videos better, or on what types of new videos should be created. But try not to be too hard on them for not havign exactly what you need.
Jason

Apex 3 + BI Publisher - how to make the most of it?

Hi there
For evaluation purposes, I have downloaded and installed the standalone version of BI Publisher 10.1.3.3.2 in my machine. I modified the Apex settings to use BIP instead of Apache FOP that I was using before.
All is working fine. When I click the Print link, I get the a PDF file.
But the problem is exactly this: all is working fine... as before! I cannot see any obvious advantage of using BIP instead of FOP. I cannot see any new property that I can set or anything like this.
So, what new features are available to me in this new scenario? How to make the most of BIP and Apex? Is it something that I need to do on the BIP side rather than in Apex side? I need to justify the cost of BIP... ;)
Any advice will be welcome...
Cheers,
Luis

Hi Luis,
Difficult question to answer in the forums, since it's very much a 'visual wow' factor seeing the BIP integration in action.
However, going into marketting-mode for a moment (please excuse me, I don't do it often!), APEX Evangelists are holding some advanced APEX Training in London in March in which Dimitri Gielis will be doing a masterclass session in APEX/BIP and FOP integration (amongst many other things).
Here's a direct link to the training for more information -
http://eurotraining.apex-evangelists.com
Like I say, it's a difficult question to answer in the forum, however just sitting and watching someone who knows their way around the products is usually enough to provide a pretty convincing argument to management on why that big BIP fee might be justified!
Hope this helps,
John.
http://jes.blogs.shellprompt.net
http://apex-evangelists.com

How to make OC4J and IIS on diffrent machines ?

Hi,
How to make OC4J and IIS running diffrent machines. following document tells use "standalone ONS daemon",Can anybody tell what standalone ONS daemon means and steps to be done to make IIS working on diffrent machine
http://download-west.oracle.com/docs/cd/B25221_03/web.1013/b25211/oc4jplugin.htm#i638738
Thanks & Regards
Vino joy

sender,
the quantize menu is in the top info box in the arrange.
if you double click on it, an extended parameter box appears with a lot of quantizing options. also RTFM about this bit.
in the sample editor, there is an audio quantize feature.
but it is old, and probably hasn't been updated in ten years........try it, you
'll prolly hate it.
there is also a quantize audio/groove plug, in the special menu.
it works....sorta.
if you're talkin' drums, on seperate tracks, like kik on one, and snr on the next, etc., try strip silence to cut the loop/file up, then select same in the arrange trk and quantize this, as above. (info box).
this does work well provided you know just where you want the feel to be.
you could also try making a groove template of the original clip/loop and use this as a timing reference.
this also works well if you can get a clean footprint of the audio.
best,
DR9

How to create executable to run in application and how to make full screen

I am developing an application for running in Desktop.
How should I make a executable so that I can launch application directly ?
Additionally, how to make the stage/scene to full screen throught the code (without explicitly mentioning height and width), because the monitor/display size might vary from model to model.

I don't know if you can make a standalone executable, although there are packagers for Java doing that. I don't know if they are usable with JavaFX. License prohibits to package the runtime, so it must be downloaded on each computer from Sun servers. That's what the JNLP does, I think.
You can also create a shortcut on the desktop with a setting in the JNLP: inside the <information> tag, you can put:
        <shortcut>
            <desktop/>
        </shortcut>to create a shortcut (user is prompted and can decline).

How to make a backup of bipublisher 11.1.1.5.0 ?

hello,
i have installed bipublisher standalone 11.1.1.5.0 on a server windows 2008 64 bits.
i would like to know how to make a backup of reports, model, security,users, role,jdbc connections....
i found http://download.oracle.com/docs/cd/E21764_01/bi.1111/e13880/T526682T572260.htm#5969703(Moving Catalog Objects Between Environments), to export catalog but the scripts are for linux and i don't find the way to export the entire catalog, not just a folder with subfolders
best regards
jean marc
Edited by: jmniard on 25 mai 2011 01:31

any idea ?

How to make an excutable from a finished vi?

I have a program that is practically finished but I am unsure how to make it a stand alone executable. I wouls like it so that I could but it on disk and use it on other machines that do not have Labview. Thanks

Heather,
With the Application Builder you can make standalone executables. The application builder is included in the LabVIEW professional package, but if you have Base of Full package, you will have to buy the Application Builder as a separate add-on tool.
Once you build your VI into an executable, it will have .exe extension, and you will no longer need LabVIEW to run it.
You can run it with the LabVIEW run-time engine. This engine can be installed from any LabVIEW CD, or download from our web site:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C130D?opendocument&node=132070_US
To order the Application Builder, either contact your sales representative, or order it on line at:
LabVIEW Application B
uilder for Windows
http://sine.ni.com/apps/we/nioc.vp?cid=10731〈=US
Zvezdana S.
National Instruments

How to make client application

hi....
help me...^ ^ how to make client application(not standalone..)
I seached bea document.. but I can't it.
if someone have sample(.ear or .jar), I hope you it share...

Hi
Client Application can be any Java class, JSP etc which is a part of multi
tier architecture which accepts input from Client and directs request to the
middle tier for processing. You can refer to
http://e-docs.bea.com/wls/docs61/jsp/index.html
for building jsp's as Client application.
Regards
johny
"kyungmoon" <[email protected]> wrote in message
news:3c4f571d$[email protected]..
>
hi....
help me...^ ^ how to make client application(not standalone..)
I seached bea document.. but I can't it.
if someone have sample(.ear or .jar), I hope you it share...

I was able copy the hardrive of my old macbook from "My Passport" onto the desktop on an older iMac. but i dont know how to make my hardrive and user name be the main one since someone had used it in the past and had their info on the comp. please help!

I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
THANK YOU!!

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to make a myRIO as a standalone device?

Similar Messages

Maybe you are looking for