How to make a new library visible for programs

I have made dietlibc package at the Arch section of Linux Vserver wiki Now the new version of util-vserver is out and I got problems - util-vserver can't find dietlibc anymore.
How could I make that library visible for util-vserver? util-vserver's configure only has option --disable-dietlibc and there is no possibility to give the location. This far I have tried to add the path to $PATH at .bashrc - but still configure does not find the library.

No problem anymore with vserver, I managed to guess what must be the location for dietlibc that works. Perhaps this problem was because util-vserver assumed /usr/lib/diet to be the location and also /usr/lib/diet/bin to be at $PATH.

Similar Messages

How to make a new section visible in the server published version

I use UPK 12 Client.
When I click "Link a new section" in an existing Module, I can see it in the outline in the left pane in my UPK 12 Developer. When I then check-in all items, click Publish > select c: drive (a test folder) > Publish entire outline, the outcome includes the new section created.
When I do the exact same procedure, but choose to click Publish > server (which is set up for my UPK) > Publish entire outline, the outcome does NOT include the new section created, but everything else yes.
How to make the new section visible in the server published version?
Thanks!
Sille

Hi Sille,
Are you publishing over knowledge center? or is it publishing to a network drive? Once you check in the section save the module once and try again. See if it makes any difference.
best regards,
SD

Library on PC was restored, how can I make a new library?

My PC was restored as it had unrecoverable viruses and spyware etc on it. Im wanting to make a new library on my laptop for my iPhone - i dont mind about all the music not going to my laptop, i know this cant happen (i would like all the present things on my iPhone to stay though). But id still like to be able to add music and stuff to my iPhone and be able to sync it. Any help is much apprectiated.

Depending on what you have selected under the various tabs for your iPhone sync preferences with iTunes on your restored PC, nothing else on your iPhone will be touched or lost.
iTunes includes an option to transfer iTunes content from an iPod or iPhone that was purchased from the iTunes store, but this is for iTunes content that was purchased from the iTunes store only.
First you need to re-authorize your computer with your iTunes account with iTunes. After doing so, with your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
If any 3rd party apps do not transfer from your iPhone to your iTunes library, you can re-download the apps with iTunes on your computer and you won't be charged again for a purchased app as long as you use the same iTunes account to re-download the app that was used to purchase the app originally.
Regarding any photos that were transferred from your computer to your iPhone, the transfer process for these photos is a one way transfer process only - from your computer to your iPhone. If the photos that were stored on your computer were not included with your computer's backup, there are 3rd party apps available that provide for transferring these photos from your iPhone to your computer, but the original resolution of these photos will be lost. Photos transferred from your computer to your iPhone are optimized for viewing on your iPhone as part of the iTunes sync process, so the original resolution of these photos are reduced on your iPhone.
Such a 3rd party app also provides for transferring iTunes content from your iPhone to your computer that was not purchased from the iTunes store, but these apps are not supported by Apple.
If you are syncing contact info with a supported application on your computer and you did not include this data with your computer's backup, before syncing contact info with the supported application on your computer, enter one unique contact in the supported application on your computer. Make this contact up if needed, which can be deleted later. This will provide a merge prompt when syncing contact info, which you want to select. The same applies to syncing calendar events if you have Outlook 2003 or 2007 available and you are syncing calendar events with Outlook on your computer.

How to make the exe always visible in the illust application.

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application(Not in Taskbar), once it was clicked. Could you please kindly help me to solve this.
Regards,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

How to make the exe always visible in the application window

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application window itself(Not in Taskbar), once it was clicked. Could you please, kindly advice me.
Thanks,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

How to make a new file folder on screen?

How to make file folder on screen?
How to make a new window in browser?

me1965 wrote:
How to make file folder on screen?
How to make a new window in browser?
Don't know what OS you have so this info is for ICS.
To make a folder on screen, long press on one app and drag and drop it on top of another app. You will kinda see both apps there now and when you touch it a folder will open up and you can choose one of the apps. You will also now be given a chance to name the folder.
To open a new window in the chrome browser, tap on the menu button (the 3 verticle dots in the upper right hand corner of the screen) and click "new tab"
If you have a different OS, let us know and someone will post the answer to your questions.

How to set a new SCSI number for a second drive?

How to set a new SCSI number for a second drive?
Walter

Walter,
This web site gives a good diagram:
http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
AO . .
A1 . .
A2 . .
If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
If you short out the pins beside AO .__. , you have designated SCSI ID One.
If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
Jim
PS
CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

A have a white screen how to make a new installation of my computer

A have a white screen how to make a new installation of my computer

More details would help...what have you done to get to a white screen? Were you in the process of reinstalling Mac OS X? Or something else?
In general, to reinstall Mac OS X, restart the Mac and hold the Command and R keys. From the Utilities drop down select Install Mac OS X and the system will download the installer. You w I'll then follow the instructions to install.
By the way, you posted in the iMac PPC forum, this belongs in Yosemite from what you show on your info line, I will ask for relocation.

HT4759 How to make a new icloud?

How to make a new i cloud ??

If you want to change to a new iCloud accout you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account.
Before deleting the account, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll or you will lose them. To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. When prompted about what to do with the iCloud data, be sure to select Keep On iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.

Can i make a new apple id for my iphone if i forgot the old one

can i make a new apple id for my iphone if i forgot the old one

Not if you have FindMyiPhone enabled.
Aren't you usign the same AppleID/Password as you use to post here?
Or did you already create multiple AppleIDs? and you want to create yet another?
-> Find your AppleID

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

How to make Add to Favorites Option for website?

Please Advice how to make Add to Favorites Option for the
Website.
Appreciated
Thank You

http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1191543&highlight_key=y&keyword1=favorites

How to make a Colorful Gif Image for Holi

How to make a colorful Gif Image for Happy Holi 2014

Okay, I know this doesn't answer your question, but don't get me wrong. A logo is meant to be the way it was designed - upright, no flipping/ swiveling animation. Why exactly do you want to let your logo turn around?
If its to grab attention, why dont you consider animating the area on which your logo sits (header)? Or maybe add nice transitive slideshows on your main content area to add more interactivity?

How to make a "new photo to publish" be considered "published" without actually publishing it?

how to make a "new photo to publish" be considered "published" without actually publishing it?
I have some photos that are really just stubs that represent the other "real" photos to publish.
I don't want to have to do a mock export/rendering of them just to make them appear published.
Any ideas?
Rob

In one of my plugins I have a requirement to download and add photos from the remote server and populate the newly created published collection in Lightroom. In this routine, I use the following code to add the images to a published collection using the method provided by Don above.
[code]
catalog:withWriteAccessDo('createcollection', function()
     newcollection = v:createPublishedCollection(h.title)
     newcollection:setRemoteId(h.id)
end)
catalog:withWriteAccessDo( 'NPGSetUpdates', function()
     newphoto = catalog:addPhoto(newpath)
     newcollection:addPhotoByRemoteId(newphoto,p.id,p.url,true)
end)
[/code]
The biggest thing here is that adding a photo like this requires the code to reside within the withWriteAccessDo block.

How to make a new library visible for programs

Similar Messages

Maybe you are looking for