How to make a page break in numbers

The only way I found to make a new page in Numbers was to make new rows down to where the page would break, but it's only letting me add a few new rows to the new page. I'd like to know how to make a page break without just adding rows.

Hi Yellowbox,
Still I'm not convinced, it gives you indeed some advantages but this page break is a great fault.
All the company is working on Apple, we try even to keep Microsoft away but what when you make a quote of several pages and have to make your lay out at the end, it is a pain in your xxx to make it well.
We cannot make different tables for each page nor I want to make it in Pages with a Numbers table.
Secondly, what do you do when you get a Excell offer that you want to bring to Numbers.
It opens well but again, you need to make all the page lay out afterwards!
Thanks for yoru reply.
It won't change my mind about Apple and Microsoft but for timing earning I won't changes all Excel offers to Numbers anymore. Even if I do not want, it would take me less time to work it out in Excel.
Our own offers will remain in Numbers ...
It is a pity but time is so important nowadays!
Nice week-end.

Similar Messages

How to enter a page break in numbers

how do you enter a page break in numbers?

In Numbers there is no concpet of "entering a page break". You look at the print preview which you see when you select the menu item "File >Print...".
If the pagination is correct you click the "Print" button. If not then you click the "Done" button and move content around. Often I place, temporary, rectangles on a page that take up the full page so I know where to put content, then remove them before printing.

How to make a page break in report

Hi,
I want a page break on the basis of the query. Is it possible to write SQL Plus Command like 'BREAK' in report? Is there any other way to make it? Is there any way using 'P_MAX_ROWS' attribute? I know in CSS2 there are some element 'page-break-before' and 'page-break-after' , but I do not understand how to implement those. Anybody can help me?
Thanks
Sumita

Hi,
You can do this in the display options tab of the report. You can break on maximum three columns. The sum which you specify in the column formatting section will be calculated for each break.
Thanks,
Sharmila

How to make a page break/create independent sections

using apple pages how do i make section breaks where i can have a different number of
columns in each section? 5 column until line 48 and then 3 columns thereafter etc?

Inserting a section break will always create a new page. If you want to change the number of columns on the same page, insert a layout break.

How to create page breaks in numbers?

How do I create page breaks in iCloud Numbers? The spreadsheet I created is 4-5 pages long, but it saves as one long scrolling document, and when it prints, all 4-5 pages are seen (very small, unreadable font) on a single page. Any ideas?
Thanks!
Dave

This excel feature is not exactly available in Numbers.
Here we may create up to 255 sheets in a document. They are reachable from the thumbnails area.
And each sheet may embed up to 255 tables also reachable from the thumbnails area.
Think different or use Excel !
Yvan KOENIG (from FRANCE mardi 23 juin 2009 12:20:18)

How do I change page orientation in Numbers on my ipad?

How do I make the pages landscape in Numbers on my iPad? I've read something about "inspector" but I don't know what that is or where to find it...

Sorry, couldn't resist
OK. top right of numbers sheet there is a spanner > Select it.
Select Share & Print > Print > On the bottom right of the print preview window is the option to change between Portrait & Landscape. Also on the bottom is a slider to change the size of the tables and an Auto fit option.
The blue bars show exactly what will be printed on each sheet.
Best.
PS. I had to read the getting started info.. I don't have a printer

How to make a page header

how to make a page header

Lynn,
Numbers 3 currently doesn't have page headers.
However, there are some workarounds that can achieve the effect of having headers (though, for footers, you're limited to page number). See this in Print Preview:
You can set up extra Header Rows in your table and have them repeat on each printed page. The Table Name only shows on the first printed page, so you may want to uncheck Table Name before printing:
See this thread for an example of how this workaround worked for one user.
SG

How do I change page breaks?

How do I change page breaks and margins in Numbers?

Hi Sharon,
Margins are set in the Sheet Inspector. These settings determine the closest that your content can come to the paper edges. You can set different margins for each Sheet in your document.
I have made an edit here, and I mention this in case you saw the original, because I originally mistook your post for a Pages question.
Sorry it took so long for you to get a reply. I started earlier but had an interruption.
Regards,
Jerry

How do you set page breaks

I have a 250 row spreadsheet that needs to be divided by month. I cannot find a way to set page breaks. Am I missing something? I know I can add rows to make a page break but it is tedious and everything moves if add or remove a row.
However, If I wanted to make each month a separate sheet, is there a simple way to move to different sheets.
Fran Wehman

Jerry,
Thanks! I look forward to exploring numbers some more since it has some nifty features. I really do like that one can have several objects on the same sheet at the same time. And I admit that I probably have too much MS mindset. But there's a reason for that.
The dominance of MS is a classic case of a feed-forward loop, or amplification, where a marginal increase of market share (for spreadsheet products in this case) encourages users and other manufacturers of supporting and complementary products (software companies, in this case) to tacitly accept the leader's product as the standard. Every additional unit sold hardens the case in favor of the leader. I admire Apple for bucking the trend. But it is a dangerous game.
In my own case, Jerry, your suggestion doesn't seem workable to me because of the specifics involved. It's a rowing event. The competitors are boats, but the same team (rowing club) has a number of different boats in different races with different personnel. To break all of this down to individual athletes (over 1,000) creates several orders of magnitude more work than what I'm doing now. To complexify things, teams change their personnel in the boats all the time, which changes the age averages and the handicapping involved. And some rowers get cut from the boat at the last minute and new ones added. The basic unit is the boat (which come in various configurations, as you may know: the eights, the fours, the quads, the doubles, the pairs, the singles). Following your advice, I suppose I would make each event (aka each race) its own separate table. This could work, but it requires a lot of additional work, because I'm dealing with 1,000, athletes, 400 boat entries, and 54 events.
I should add that our registration contractor provides me with the raw data in (you guessed it) Excel format.Re-parsing all that data into a boating table and then referencing that into event tables is an astronomically bigger job than the one I already have. This is why Apple's is a dangerous game. It's absolutely fine to share my output with the rest of the world, especially when I can reformat it into Excel, but I also have to deal with the output of co-workers, contractors, etc., which is more likely than not going to be in Excel. With Numbers, Apple has been trying to lure away folks from Excell by offering neat features. They really are neat. But Apple has to do something more. It has to minimize the cost (in terms of sunk labor inputs and additional effort) of flipping from a world dominated by MS. I believe it can, but it has to be able to meet its consumers where they are--stuck in an MS reality--and make the very real labor costs of converting go away, not just add neat features to entice. We all like those features. But they don't make the headache of conversion go away.

How to create a page break in PDF output

Hi there
Does anyone know how to create a page break in the PDF output when using the EXPORT TO PDF command?
I can create a page break using the page-break-after/before HTML stylesheet command, but this is not "interpreted" when the PDF is generated, and I am required to print each table in my web template on a new page.
Please ... been searching for ages for a solution to this and can't find anything.
Cheers,
Andrew

Try posting in the iWorks forum.
https://discussions.apple.com/community/app_store/iwork_for_ios

How can you insert "Page Break" in a pdf file so you will specify the pages

How can you insert "Page Break" in a pdf file so you will specify the pages

How / from what was the PDF originally created? It would be easiest to insert page breaks into the original document, then recreate the PDF.

How to insert a Page Break Programatically ?

Hello,
How to insert a Page Break Programatically ? Please Help..
Regards,
Aanta
Message was edited by:
user526601

Hi Praveen,
Thanks for the reply...
I think <?split-by-page-break?> syntax is used in a loop. In my case i need to check the condition.. if its true i need to insert Page break.
I have requirement Like as follows
- In the Invoice Print Report I need to display “Invoice Appendix” On the Last Page of an Invoice.
- If I am running for multiple Invoices then Invoice Appendix should print on last page of each Invoice.
As I'm using XMLP 5.6.1, i'm unable to use <?start@last-page:body?> syntax. So i'm trying to achive this as i'm explaing below.
Invoice Header
Invoice Lines
end Of Lines
If Invoice_Appendix_flag = 'Yes'
---------------<Page Break>------------------
New Page(Or Last Page)
Start Of Invoice Appendix
End Of Invoice Appendix
End Of Header

How to make turning page with ibooks author?

How to make turning page with ibooks author?

This question has been answered on this thread
https://discussions.apple.com/message/17981772#17981772#17981772
Best regards.
Alex

How to change the page break in adobe forms

Does anyone know how to change the page break on an adobe form? I'm hoping it will be the same way you change the page view in excel.
Can anyone help?
Thank you in advance,
Priscilla

HI
 YOU CAN USE THE FOLLOWING SYSTEM FIELDS OF SMARTFORMS FOR THE MENTIONED PURPOSE
&SFSY-PAGE& 
 Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
 Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output
&SFSY-JOBPAGES& 
 Contains the total page number of all forms in the currently processed print request.
REGARDS
ANOOP

How to achieve dynamic page break in Smart form

Hi
1.How to achieve dynamic page breaks in Smart forms.
2.What are the various table types in Smart forms.
Regards

Dynamic page break : 
create a node of type COMMAND and in its attributes check "Go to new page".
There are Tables and Templates in smart forms :
Use node type Template to display a table whose layout and size (number of lines and columns) is determined before the runtime of the print program else use Table.
Take a look at <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf">SAP Smart Forms (BC-SRV-SCR)</a>
Regards

How to make a page break in numbers

Similar Messages

Maybe you are looking for