How to make a Pages doc a graphic?

I work in a mixed office, mainly Windows. Since I use a Mac I was asked to design a simple graphic (using no more than standard Pages elements) to be used as a letterhead in Word documents.
Is there a way to save a Pages document (about 1" x 5.5") as a high-resolution graphic that can be put into a Header in Word?
Thank you for any assistance.

It may have to do with the fonts themselves. I have three areas to this letterhead. On the left is a replica of some variant on Times Roman in 18 or 20 point. In the middle is standard Times New Roman in 12 point. But in the right third I have a list of eight or nine names and their titles in 7 or 8 point Times New Roman. When those fonts become bigger (by stretching the tiff across the full width of the page) they become a somewhat jagged.
As I said, not unacceptable, but not quite typeset quality either.
Thanks again.

Similar Messages

HT4283 How can I make my pages docs created on my iPad totally private and secure? I am a psychotherapist.

How can I make my Pages doc on my iPad totally private and secure?
<Email Edited by Host>

No.

How to make a page break in numbers

The only way I found to make a new page in Numbers was to make new rows down to where the page would break, but it's only letting me add a few new rows to the new page. I'd like to know how to make a page break without just adding rows.

Hi Yellowbox,
Still I'm not convinced, it gives you indeed some advantages but this page break is a great fault.
All the company is working on Apple, we try even to keep Microsoft away but what when you make a quote of several pages and have to make your lay out at the end, it is a pain in your xxx to make it well.
We cannot make different tables for each page nor I want to make it in Pages with a Numbers table.
Secondly, what do you do when you get a Excell offer that you want to bring to Numbers.
It opens well but again, you need to make all the page lay out afterwards!
Thanks for yoru reply.
It won't change my mind about Apple and Microsoft but for timing earning I won't changes all Excel offers to Numbers anymore. Even if I do not want, it would take me less time to work it out in Excel.
Our own offers will remain in Numbers ...
It is a pity but time is so important nowadays!
Nice week-end.

How to make turning page with ibooks author?

How to make turning page with ibooks author?

This question has been answered on this thread
https://discussions.apple.com/message/17981772#17981772#17981772
Best regards.
Alex

How to make a page header

how to make a page header

Lynn,
Numbers 3 currently doesn't have page headers.
However, there are some workarounds that can achieve the effect of having headers (though, for footers, you're limited to page number). See this in Print Preview:
You can set up extra Header Rows in your table and have them repeat on each printed page. The Table Name only shows on the first printed page, so you may want to uncheck Table Name before printing:
See this thread for an example of how this workaround worked for one user.
SG

How to make a page reload

Hi every body, and thank you for reading my post, here's the question I have
Does anybody know how can I make a page reload???
Thank's

If you mean how to make the page reload when someone pushes a button or clicks an action component such as a hyperlink, then have that component's action method return null. To create the action method for a component, double click the component in the Visual Designer.
To make the page reload after someone selects from a drop-down or list, or when the user changes the value in an input text field, right-click that component and choose Auto-Submit on Change.
Chris

When the page will be load how to make the page blank in run time

Dear
when i will run the page the fields shoud come with blank Field.
i want to make it in runtime.
example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come, after thar i will create.

duplicate how to make the page blank field in runtime

How to make Login Page in ADF?

Hi,
Can anyone suggest me, how to make Login Page in ADF.
I am new on ADF, is any sample code or application is there than it will be helpful for me.
please reply its urgent.
Thanks,
Ramit Mathur

HI,
Jspx code
<af:panelFormLayout id="pfl1" binding="#{loginBean.mainForm}">
<f:facet name="footer"/>
<af:inputText label="Username" id="it1"
value="#{loginBean.username}"
binding="#{loginBean.usernameId}"
required="true"/>
<af:inputText label="Password" id="it2" secret="true"
value="#{loginBean.password}"
binding="#{loginBean.passwordId}"
required="true"/>
<af:spacer width="1px" height="20px" id="s3"/>
<af:panelGroupLayout id="pgl3">
<af:commandButton text="Submit" id="cb1"
action="#{loginBean.doLogin}"/>
<af:spacer width="85px" height="1px" id="s4"/>
<af:commandButton text="Cancel" id="cb2"
action="#{loginBean.clearFields}"/>
</af:panelGroupLayout>
</af:panelFormLayout>
BackingBean code
public String doLogin() {
String un = _username;
String pw = _password;
// byte[] pw = _password.getBytes();
FacesContext ctx = FacesContext.getCurrentInstance();
System.out.println("ctx" + ctx);
HttpServletRequest request =
(HttpServletRequest)ctx.getExternalContext().getRequest();
CallbackHandler handler = new SimpleCallbackHandler(un, pw);
System.out.println("Handler" + handler);
try {
Subject mySubject = Authentication.login(handler);
System.out.println("mySubject" + mySubject);
ServletAuthentication.runAs(mySubject, request);
ServletAuthentication.generateNewSessionID(request);
String loginUrl =
"/adfAuthentication?success_url=/faces" + ctx.getViewRoot().getViewId();
System.out.println("loginUrl---" + loginUrl);
HttpServletResponse response =
(HttpServletResponse)ctx.getExternalContext().getResponse();
System.out.println("response---" + response);
// loginUrl = "/adfAuthentication?success_url=/faces/WelcomeScreen1.jspx";
sendForward(request, response, loginUrl);
System.out.println("---" + response);
} catch (FailedLoginException fle) {
FacesMessage msg =
new FacesMessage(FacesMessage.SEVERITY_ERROR, "Incorrect Username or Password",
"An incorrect Username or Password" +
" was specified");
ctx.addMessage(null, msg);
} catch (LoginException le) {
reportUnexpectedLoginError("LoginException", le);
return null;
private void sendForward(HttpServletRequest request,
HttpServletResponse response, String forwardUrl) {
FacesContext ctx = FacesContext.getCurrentInstance();
System.out.println("sendForward--ctx--" + ctx);
RequestDispatcher dispatcher =
request.getRequestDispatcher(forwardUrl);
System.out.println("sendForward--dispatcher--" + dispatcher);
try {
dispatcher.forward(request, response);
} catch (ServletException se) {
reportUnexpectedLoginError("ServletException", se);
} catch (IOException ie) {
reportUnexpectedLoginError("IOException", ie);
ctx.responseComplete();
// 12.Implement a reportUnexpectedLoginError() method:
private void reportUnexpectedLoginError(String errType, Exception e) {
FacesMessage msg =
new FacesMessage(FacesMessage.SEVERITY_ERROR, "Unexpected error during login ",
"An incorrect Username or Password" +
" was specified");
FacesContext.getCurrentInstance().addMessage(null, msg);
e.printStackTrace();
}

How to make the page expired when user click back

how to make the page as expired when i click back button on the browser.
i want a better way.
actually i have a timer.when it reaches 00.00 then the expired page will be called automaticlly using location.href="expired.jsp" then if the user clicks back it should not show the previous page.this concept is applied with paging concept
response.setheader is not working ...
i have redirect when click back using
<body onunload>....i call another page here.
but it is not a good way.
so pls help me to solve this problem
using session or another good way

Use this instead.
Frame.setDefaultCloseOperation(javax.swing.WindowConstants.DO_NOTHING_ON_CLOSE);

How do I make a Pages Doc a jpg?

I used to be able to press "Save As" but all of a sudden I noticed that option is gone. I could Print and "Save as" a jpg, and that option is gone also. I am not sure if a new softward update took that option away, but I can no longer convert Pages Docs into jpg. Please help. Thank you!

Technically, you are correct, and the PDF export provides the best choice of image type and resolution control. Here is an approach for a 72 dpi image of a document page. Less practical than the PDF export solution.
Open the document in Preview
Turn on View Thumbnails
Select the page to image
File > Take Screen Shot > From Selection...
Place the selection cross-hairs in upper left, and drag over page, then release.
An untitled image appears in thumbnail view. Select it.
File Export...Default is 72 dpi PNG.

How to make a page that should be inside an iframe load up its parent page?

Hello all
Here's my dilema...
I'm creating a site with page fragments that the user is able to view by having it load into an iframe. So far so good and it's all working perfectly well.
The problem that I envisage is that, even with no-index robot meta tags, Google et al are almost certain to index these page fragments and proffer them in search results.
So, my question to you is two-fold:
1 - how can I make a page fragment load up the parent page should it be selected from a Google search result
and
2 - once the parent page is loaded up, how can I then make it load the selected content page into the iframe so that the user sees what (s)he is expecting to see?
I'm imagining that it will require cookies and scripting, but I'm still at the (very) early stages of learning such stuff, so have no clue whatsoever on how to go about it!
Any bright ideas / tutorials / sites I can nick code from / complete solutions that I don't have to pay for would be much appreciated.
Thanks
Peter

AFAIK there's no practical way to do what you require. Sorry. This is one of the many downsides to Framed sites. It also makes bookmarking and printing pages difficult. Not to mention user unfriendly from a web accessibility viewpoint. Re-think your need for Iframes throughout an entire website. The best websites use one complete page for each topic. Index, About Us, Contact Us, etc...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

How to make a page that slides in

Hi,
I am new and i'm trying to add a page that slides in from the
right. I'm gonna be adding this to a dynamic flash template that i
bought. I've managed to make the page slide then stop, as i know
how to make a simple motion tweed. However, how do i make that page
slide in when i click on a link button i will be making? I just
don't know how to make that action happen. Thanks for any repplies
i appreciate it.

AFAIK there's no practical way to do what you require. Sorry. This is one of the many downsides to Framed sites. It also makes bookmarking and printing pages difficult. Not to mention user unfriendly from a web accessibility viewpoint. Re-think your need for Iframes throughout an entire website. The best websites use one complete page for each topic. Index, About Us, Contact Us, etc...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

How to transfer files Pages docs in bulk from iPad to Mac

Since the lovely iCloud Drive came out and Yosemite, things have been woefully out of sync with my iPad. I've posted in a number of places on these boards and even, according to a rep I've been in touch with from Apple Support, an engineer is troubleshooting the problem. I have a LOT of Pages docs I've accumulated in iCloud on my iPad. I cannot access iCloud through a browser or on my desktop Mac. In other words, I can view and edit files from my iPad, but I canNOT do the same on my Mac. If I want to transfer files from my iPad the only way I can think of is
Open Pages
Tap the arrow up at the top
Tap send a copy
Tap ONE selected document
Tap what format to send it in (sadly, I'm using Word b/c I don't trust Pages anymore)
Tap selection of how to send (to ITunes)
Only then can I go to iTunes on my Mac and transfer the file. I have probably hundreds of docs I want and need and can't afford to have them floating semi-available in the cloud or lost forever.
A few other details:
- I cannot access Pages in iCloud through a browser (any browser, any machine, anywhere; I've tried every combination possible, when I log into iCloud and go to Pages, it cycles and then dumps me out to the login screen)
- I have a few third-party apps which let me look into my iPad and have slightly more functionality than iTunes permits, but none of them permit wholesale basic drag-and-drop a bunch of files and save to another drive. I know this is b/c the files are ostensibly in iCloud, but
- Here are other places I've posted about this problem
can't log in to iCloud.com
Pages under Yosemite not in sync with iCloud Drive and other issues
Thanks in advance.....

Though no one replied to this topic, I'm updating with what I've learned after spending many hours on the phone with an Apple tech rep who had esacalated to engineers. There is NO solution. Docs that are out of sync or unretrievable from iCloud or iCloud Drive, they cannot assist with. They offered to wipe my iCloud Drive account and reset it, but I wanted them to restore it afterwards. Just a simple, pull the data off, dump it on an FTP server so I can access it. Nope. No assistance. Not their problem. I have to manually pull ALL the files off my iPad's iCloud account, the ones I can get to and go through this insane 6 step process to get to those docs. Really disappointed with Apple. Using MS Word on the iPad and though not perfect...at least the Pages docs won't be lost.

How to make a page that should be inside an iframe load up it's parent page?

Hello all
Here's my dilema...
I'm creating a site with page fragments that the user is able to view by having it load into an iframe. So far so good and it's all working perfectly well.
The problem that I envisage is that, even with no-index robot meta tags , Google et al are almost certain to index these pages fragments and proffer them in search results.
So, my question to you is two-fold:
1 - how can I make the page fragments load up the parent page should it be selected from a Google search result
and
2 - once the parent page is loaded up, how can I then make it load the selected content page into the iframe so that the user sees what (s)he is expecting to see?
I'm imagining that it will require cookies and scripting, but I'm still at the (very) early stages of learning such stuff, so have no clue whatsoever on how to go about it!
Any bright ideas/tutorials/sites I can nick code from/complete solutions that I don't have to pay for would be much appreciated.
Thanks
Peter

Actually, I did carefully choose this forum as being the most appropriate since my question, or rather what I imagine the answer might be, will involve things like scripting and/or cookies.
Would that not make it "dynamic" enough to remain here?
Thanks
Peter

How do I sync Pages docs between my Macbook and a PC?

I want to sync Pages documents between my Macbook and a PC, for when I don't have the Macbook with me. I created a Pages file and saved it to iCloud, but it doesn't appear in the iCloud Pages web interface, even though other docs created in the web interface do.
Sorry to ask such a basic question, but I can't figure this out. If I'm working in Pages on my Mac and save the document, it's like it goes someplace different than when I create a Pages doc on the web interface...
Seriously confused, and not understanding how this works. Apologies for being such a beginner. This is really the only thing I want to use iCloud for.

Thanks, Rick. I have identified another part of the answer -- my husband and I both use this MacBook. We have separate IDs and iCloud accounts. But apparently only one account is allowed to store iWork files on iCloud. Apparently when his iPhone was set up, or maybe when he borrowed the MacBook for a business trip, or when he took some pictures with his new iPhone -- who knows how or when -- the storage capability got attached to his iCloud account on my computer. I started to sign him out, then was told that if that was done, the photostream would be deleted.
At this point the complexity is beyond ridiculous. We have 3 Mac devices, two computers and a phone, and I can't figure out the logic behind this limitation. I wish I had spent the hours that were invested in this effort in something more productive. I don't think iCloud is ready for primetime yet.

How to make a Pages doc a graphic?

Similar Messages

Maybe you are looking for