How to make a photo "fit" with the surrounding film clips?

I am working on a new project in which I have a photo which is "taller" than the other film clips, so consequently, when that clip is playing, one cannot see the top or the bottom because they have been cropped off to match the height of the other film clips.
What can I do to make that picture "fit"? It is important because this is a photo of a person, not just landscape.
-L
Message was edited by: Lorna from Hawaii

I clicked a button that said Ken Burns!!! I figured it out.
-L

Similar Messages

  • How to make a photo STAY in the assets panel for future use for In browser editing?

    How to make a photo STAY in the assets panel for future use for In browser editing?
    When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
    When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

    Sure ... right mouse click on  your page and choose 'Exclude Page from Menus' :-)

  • How to make a photo slideshow with next button

    Is it possible to make a photo slideshow for a dvd that will use the next button to go forward to the next photo? Can I import a video from another dvd and include it in the same dvd on which I put the photo slideshow? They might fit: 220 mb of photos and the video dvd is 2.6 gb

    Hi arthurav42
    Welcome to apple discussions. First thing to mention is that iDvd doesn't look at MB's or file sizes (excluding the dvd-rom section of the dvd). Rather, it looks at QT playback in hours and minutes. We call this total run time and it is not to exceed 2 hours / 120 minutes for a SL Dvd-R (and about twice that for DL).
    As to your first question, Is it possible to make a photo slideshow for a dvd that will use the next button to go forward to the next photo? The direct answer is not within iDvd. You'd need apple's pro apps FCS/DVDSP in order to add a next button to individual photos contained within a manual slideshow.
    However, one may be able to simulate this feature in iDvd with the use of a graphics app like Adobe PS in which one could add an arrow to any given jpeg / photo. It wouldn't highlight the button itself after it's selected on a remote / clicked but it would move directly to the next image once a person clicks on it (or anywhere else on the image for that matter).
    As for the second question, Can I import a video from another dvd and include it in the same dvd on which I put the photo slideshow? ..... Again the answer is yes within DVDSP and not directly within iDvd (you'd need a third party app like DVDXDV from which one can convert to a QT file for use within any of the i-apps or pro apps for that matter like DVDSP). Once converted, simply add the movie to the slideshow feature in iDvd. And yes it's possible to add both photos and movies to the slideshow in iDvd. For example:
    click here
    This link courtesy of OT:
    http://homepage.mac.com/toad.hall/.Pictures/Forum/iDVD8movieSS.png
    If you need more help with this then just come on back.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • Upgraded iPad 3 to IOS 7 how to make wallpaper photo fit properly?

    Since upgrading my wallpaper photo is enlarged, cutting off most of the photo. How do I resize to fit properly? Thank you.

    It's not a perfect fix, but try going into your photos app, selecting your photo and using the 'send' icon to send it to be wallpaper (the little square with an arrow poking out of it).
    You'll have a bit more control than you do via the settings app, but not as much as you used to. Also, the higher resolution the image is to begin with the better your results may be.

  • How to make curved photo paper with Photoshop

    Hi everyone:
    I would like to make a curved paper as that in this picture "http://stridsberg.deviantart.com/art/3D-rop-44014352". Just the paper, not the drop. Could any one tell me how to make it with Photoshop?
    Thanks,
    fireman

    I'll be interested in how to achieve the realistic shadow.
    -Noel

  • How Do I export photo's with the camera info attached?

    I'm trying to export some photo's to another photographer for some constructive feedback. Is there a way to include my camera info used on each shot, such as ISO, Aperture, Shutter speed, etc attached with the photos?

    A few notes:
    • Exposure settings are stored in the EXIF information which is stored in the image-format file.
    • Any file viewer should be able to show you the EXIF information.  You just have to know how to use the viewer.
    • As shown, in the OS X program "Preview" use "Tools ▹ Show Inspector" to see the EXIF
    • Your friend will have to know how to show the EXIF with the viewer s/he uses.
    • The OS X program "Preview" should not be confused with what in Aperture is called a "Preview".
    • Previews in Aperture are, in effect, large JPG-format thumbnails.  Their existence and size are set in Aperture Preferences.
    • Previews exported from Aperture _should_ contain the EXIF info.  (Sorry, I can't confirm this right now -- but it is easy to check.)
    • Files created  by exporting Images from Aperture contain the EXIF by default.
    • You can put the exposure settings _on_ the picture or on a border around the picture using the highly-regarded Aperture plug-in BorderFX.  I suggest doing this, saving the BorderFX preset, and re-using it for each Image you want to share with your friend.
    • Example:
    (Sorry -- will add later.  Forum software not allowing me to include a picture file.)

  • How to get my photos printed with the full image?!

    I just bought iLife and when I select certain cropped photos to print, the top of someone's head gets cut off in the the photo. If I change sizes of prints or rotate the photo, it cuts off different amount of head but never gives the full image. I did not have this problem with iphoto before I installed this new version. I need to have access to printing photos. I use Canon MP500, ibook G4 and Airport Express for wireless printing. I think the prob is iLife cuz it didn't do this before in iPhoto and I have no prob with other applications. Help!!!!!!

    Select the photo you want to print, and click on Edit. Then click on Crop, and a drop-down menu will appear. Use this menu to select the photo size that you want to print. Then use the cropping frame to get the photo the way you want. It is important to select the correct size of the printed photo because the ratios of length to width are not the same from one size to another. For example, a 4 x 3 is closer in shape to a square than is a 5 x 7. You might have to try different photo sizes from the drop-down menu to get he result you want.

  • How to Make a 1 DVD with the content of 2 DVD's?

    I have a project that rquires to re-edit the content of 1 DVD to spanish, and also add the original English DVD material into this new DVD, how do I create 1 DVD from my normal Encore project and and the other files from the English Version Disc, which by the way has links, PDF's, and Ineractual Player Auto Start stuff. I'm using Encore CS3, but I just downloaded CS4 on a PC XP. Thanks for your help.

    Thanks for the reply. I'll respond to your questions...
    I have a DVD (movie not ROM) with a 30 minute safety video in English. The DVD has an incredible amount of links that go from one menu to another to another, it's the most confusing and elaborate menu/chapter I've ever seen, well my customer wants me to translate it into Spanish, but now he told me he wants the English AND Spanish version to be in one disc. That's the problem. I can capture the movie. I can translate the script and do the Spanish voice over (just like in the old karate movies) I can create the new menu pages in Spanish and I can create the intricate links, so what do I do with the English version? I can't create the whole English version again, more like I don't want to is there another easier option?
    Once I create the new Spanish project using Encore CS4 I don't know how to prompt Encore to attach the English DVD content with all the functionality of menus, chapters and links. I can attach movies, assets, etc. Can I attach anything else? This is what the DVD has inside:
    16 objects: 1.45 GB
    Video_TS folder
    Audio_TS Folder
    Average_files folder
    Common folder
    Good_files folder
    Poor_files folder
    Win folder
    Autorun File
    Average HTML document file
    Disc.id ID file
    Good HTML document file
    IG87 Word Document file
    Install InterActual file
    Poor HTML document file
    Poster PDF file
    Readme TXT file
    > Interactual Player is a file that the past DVD creator used to help the viewer go from Laptop video to web pages, etc. really annoying since you have to download to your hard drive as soon as the DVD starts.
    Thanks for your time.
    VDOMSTR

  • How to make a control table with the same number of rows of its itab

    I'm creating a control table, but it always have the maximum number of lines possible.
    How can I make it so that it has only the same number of rows of it's internal table?

    solved partialy with this:
    MODULE locka_lin OUTPUT.
      DATA: lin TYPE i.
      DESCRIBE TABLE t_obj LINES lin.
      table_con-lines = lin.
    ENDMODULE.                 "  OUTPUT
    but it still doent work when lin = 0
    any simple way to solve it on that case?
    Edited by: RagnaRock on May 5, 2010 6:00 PM

  • How to make Web Photo Gallery with 3 columns of thumbnails?

    Hi all
    I have used web photo galery to build a few sites, but always with thumbnails in a single, vertical column, within a frame that scrolls. and i have never mch liked that scrollbar.
    I have come across this page:
    http://www.mariannekolb.com/recent.html
    which, as i look at the code, may not even be using web photo gallery, but is very similar.
    anyhow, does anyone in this group have any idea how this multiple column thumbnail (without scroll bar) is accomplished?
    thanks

    howsthisforaname wrote:
    I see how the css works, and it is much superior to alternatives I have seen.
    But I fear I may be overlooking something:  are you manually coding the html, writing the captions, and creating the thumbs?  or is there a program that generates these?
    Manually coded the CSS. Used Photoshop to optimize images, watermark them and create thumbnails.
    Used Dreamweaver to insert thumbnails, full-size images and caption text.
    If you want software to do the heavy lifiting for you, look at jAlbum.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Help on how to make an infinite loop with the same space on all images

    HI:
    I made a movie clip with infinite  loop in which there are images that move from right to left something simple like a marquee, and each image has a blank space between  them, but between last and first image there is a more space, how I can do to  make all images have an equal space between each one and that the motion never stops.

    Thanks for your time and answers my friend, but I'm still not be able to achieve what I want, I forgot to tell that I'm doing this by layers, let's say, I have 5 images, (in fact I have like 50 images converted to movie clip symbols) each image has it's own layer, layer 1, layer 2, layer 3, layer 4, layer 5, then I put a 200 frame motion tween on all layers at 30 fps, then I arranged layer 1 on the first frame to the frame 200, the second layer from frame 50 to frame 250, third layer from frame 100 to frame 300, fourth layer from frame 150 to frame 350, and fifth layer from frame 200 to frame 400, by this I mean I put a 50 frame of space on each image but if you can see, the last image has a duration from frame 200 to frame 400, and there's nothing on frame 250 where it is supposed to be another image to match the same blank space of all the others, the movie clip restarts on the frame 400, and there's a 150 frames of blank space between the last image and the first image, I put the gotoandplay on the frame 250, but it abruptly restarts the movie.
    Is there another way to do this ?
    Am I doing something wrong ?
    Please I really really need help on this.
    Thanks

  • How to make a round circle with the notch line

    Hi
    If I in Illustrator on the same layer make a Elipse with a 50pt stroke (blue color) and then i make 2 lines with a 20pt stroke (black color), so its lookslike a cross and rotate it 45 degr.
    Then i Outline the 3 elements "Outline Stroke" and align the 3 elements H and V Align Center.
    Now i want to cut the black lines out of the blue cirkel, so I get 4 pices with a "non-color" space between, but wjen i select the 3 elements and use Pathfinder -> Shape Modes, then i can't cut the lines out...
    What do i do wrong.
    What i want to end up with is something like this cirkel, so i can tage the 3 pices and give em another color.

    I did it this way.
    1) Ungroup a copy of a pie chart to disconnect the data.
    2) Draw a filled circle on top of the chart.
    3) Pathfinder Divide and delete the pieces in the centre.
    4) Select the remaining pieces and Object > Expand.
    5) Select just the expanded strokes and pathfinder Unite
    6) Pathfinder Divide and delete the United stroke.

  • How to make text clicks go with the volume?

    My old iPod 3G used to make text typing sounds according to my volume. So if my volume was off there would be no text noises but with my new iPod touch the texting sounds are there regardless.  What do I do?

    Roxpat wrote:
    I'm beginning to consider learning other applications (Dreamweaver and/or specific languages), so feel free to offer those up as well.
    roxpat ~ Since your web site content is community oriented, you may be interested in this free, web-based site builder for social networks:
    http://about.ning.com/product.php
    ...Their Events feature lets members know about upcoming playgroups, coffee mornings, etc. related to your social network's theme. Read more here.
    You may want to consider hyperlinking from your iWeb site to a Ning site to provide some specific feature that iWeb doesn't offer.

  • How can I make a photo fit my iPhone 6 as wallpaper?

    I have an iPhone 6, and would like to set a photo as wallpaper, but no matter how I crop and try to resize it, it does not fit and an edge is cut off. 
    Any tips on how to make a photo fit?  I did not have this problem with my previous iPhone 4s.

    The easiest way is to select the photo you want to use.  Then edit it (crop, enlarge, move left/right/up/down) then when you are happy with it - take a screen shot (tap sleep/wake button at same time tapping Home button).  Use this saved image as your wallpaper.

  • How do I delete my user ID photo, taken with the camera in the MacBook Pro.  It keeps appearing randomly when I sign in....even after I make changes.

    How do I delete my user ID photo, taken with the camera in the MacBook Pro (when you first buy and set up the computer...).  The photo keeps appearing randomly, even after I've changed it to a "better picture".  I can't get the change to "stick".  Anyone else having trouble with this?  Thanks!

    what OS are you using?

Maybe you are looking for

  • Payment Date is Above the Cumulation Window

    Hi gurus - We have a situation with a Canadian employee who was converted into our system as a retiree. The only payroll results he has are NAMCs for Year End adjustments. We are testing an issue related to YE and are making NAMC entries on IT 0221 t

  • How can i view the full text of a query??

    I must view the full text of several queries. I use the v$sqltext and v$sql, but i can´t view the full text. Do you know any method to do this?? Thanks a lot!

  • "Failed to transfer due to internal error" in AC

    I am running CCM 4.1(2) I have several receptionists that use attendant console. When anyone of the receptionists log into AC call control comes up. When they try to transfer to users in the directory they all get the "Failed to transfer due to inter

  • HT203167 I downloaded a movie n now can't find it? This was on my iPad

    I downloaded a movie and now can not find it. This was on my iPad.

  • Acrobat XI

    I recently purchased Acrobat XI on line and downloaded the program, but for some reason it is not working properly.  I have tried to repair the installation, but I get Error 1335 that says:  The cabinet file "Data 1.cab" required for this installatio