How to make a region mandatory based on some conditions using CO Extension?

Dear All,
I want to make Attachments region in a seeded page mandatory, based on some conditions. I am able to make fields mandatory using CO Extension, but i am not able to make the attachments region mandatory. Please help.
Thanks
Raj

Raj,
I have not tried but check if you could get the rowcount which shows how many attachment are upload or not. Then by checking this throw exception if the rowcount is o.
Thanks
--Anil
http://oracleanil.blogspot.com/

Similar Messages

How to make a field Mandatory in a Table view?

How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.G

Hi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM

How to make a field mandatory in billing

How to make a field mandatory in billing document,if m right with the help of incomplition log but how.....
plz reply the full configuration.

Hi Mohan,
We normally create a billing document with reference any other document say Order or delivery.
so, all the necessary information in the invoice will be taken from preceeding doucments. Thats way in the order level we check for incompletion log. If any important data is missing in the order level then the succeding documents will not be created.
Thats way in the billing documents all the necessary information will come automatically either from preceeding documents or from master data.
Still you want to make any field mandatory, you can do these by modifieing Billing documents user exists,you can make which ever the fields are mandatory and to be checked before saving. so when you are going to save the invoice, it will check if these fields are maintained or not.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen

How to make all fields mandatory in sales order T- code VA01 initial screen

Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar Reddy

Hi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad

How to make Business place mandatory

Hi, SAP Gurus,
How to make business place mandatory in "MIRO ". As i know there are two ways
1) Through Screen Variant T/code: SHD0
2) Validation
But here i Never worked on sreen variant level and validation, I need step by step to make business place mandatory in MIRO
bY USING ABOVE T/CODES,
Regards,
Prabhakar

Hi Bhanu,
Use T.Code GGB0 - Validation maintenance - Change Validation overview.
Choose Financial Accounting in Application area. Select Line Item and click Validation create icon.
Give a Validation ID BP and text Business Place Mandatory and save.
Click Step icon - Step 01 - now the prerequisites; check and message will come in margin panel.
Give text for the step 01. Click Prerequisites. You can see the Table Fields Structure BKPF, BSEG, and SYST.
If you double click on this you view individual fields relating to these master tables.
Your prerequisite may be like this :
Company Code is = XYZ ; T.Code = MIRO & F-43; Posting key = 31 ( Credit Vendor)
Double click BKPF > double click BKPF-BUKRS> click "=" > click constant > a pop up box will open
here fill up your company Code XYZ. This will automatically come in the top box. Click "AND". Now there is a back arrow
button in the table field panel and come back to the original display of master tables. Here double click SYST
Click SYST-TCODE > click "=" > click Constant > in the pop up box enter tcode MIRO. If you want to add F-43,
you have to click "AND" after this and repeate SYST-TCODE = F-43. Now click back arrow and double click BSEG and
click BSEG-BSCHL > Click "=" > Click Constant > in the popup window enter 31 and save the prerequisites.
(For the above requisites, the system will check if Business Place is 1000 is filled up during transaction and if not it has to
give a error message.)
Now Click Check in the right margin below prerequisites menu. Again the table list will be seen with BKPF, BSEG and SYST
Double click BSEG > click BSEG-BUPLA > Click "=" > Click constant and in the pop up box fill the business place 1000 and save
the check menu.
In the right margin now double click message. Here you can create a message text of your own "Business Place mandatory"
Save the Message and come back and finally save the Validation so created.
Now use T.Code OB28 and enter your Company Code > give call point 2 > and Activation level 1 and save the entries.
Now you can check for the transaction in MIRO where without filling the Business Place field you cannot save the entries.
Hope the above steps will be clear for you. If you have any doubt please revert back.
Best Regards,
Sadashivan

How to make relationship block mandatory?

Hi,
Please let me know how to make relationship block mandatory to create a business partner?
Vinay

Hi Vinay,
Did you try to set the flag mandatory in the configuration of the relationship view for a field (e.g. relationship).
Just go to the view in the component workbench, select your configuration, mark a field and go to Show Field Properties.
Hope this helps.
Regards, Thea

How to make characteristic as Mandatory

Dear All,
In Batch Management, for a class, how to make particular characteristics as a "Required Entry".
In class, I can see "Required Entry" check box, but it is greyed out. How to make it as Mandatory.
Because, we have maintained "LOBM_HSDAT" characteristic for a class.
But while doing MIGO and MB1C, it is not asking to Manufacturing date.
Please let me know how to make it as mandatory field in a Class.
Regards,
Mullairaja

Not sure this would help you but you can try,
In t.code CT04, enter the characteristic LOBM_HSDAT and click on change button. Go to basic data tab. Check the box required entry, which you can find on the right hand side and then save. Test again. You must also test in t.code MSC1N apart from MIGO.
MullaiRaja, I must take a step back. The above solution proposed will not hold good for MIGO. To force the user to enter the manufacturing date/expiry date, then in material master ->Plant data/Stor.1 view, maintain the settings for min.shelf life, total shelf life and Period indicator for SLED. If these data are maintained, then when the user does MIGO and if there is no batch master already maintained, then the system will force the user to enter the manufacturing or expiry date.
Regards,
Edited by: Shiva Ram on Jan 5, 2011 11:27 AM

How to make a checkbox mandatory

Hello,
I created a checkbox where I want the user to check that they have read and acknowledged a privacy statement.
I am curious how I make the checkbox mandatory, as I dont see an option in the Object Pallete.
Thanks in advance!
Nik

Write the following line code on initialize event of the CheckBox to make it mandatory.
this.mandatory = 'error'
Nith

How to make a filed mandatory of an editable ALV

Hi Guru,
Pls tell me how to make a filed mandatory of an editable ALV so that while a new records is inserted the mandatory fields are filled.

hi,
You can make fields as mandatory fields using data changed event.
validate the entered or blank entries of a column in data changed event and call method 'add_protocol_entry' to raise errors.
Check the program : BCALV_EDIT_03 & BCALV_EDIT_04for more details.
Refer to this link....
about field in alv
obligatory field editable in ALV

How to make an index in InDesign CC 2014.1 using a topics list?

Hi all,
I have read the long help document on how to make an index in InDesign CC 2014.1 using a topics list, and still can't work out what to do.
I have done a 548 page book, using a document for each chapter, and a book file to put them all together in the right order.
I now need to make an index at the back, as the author has many quotes throughout the book at the start of each chapter and section.
I have a list of those people quoted and want to upload this list and get the index feature in InDesign to find all instances of the name occurring in the entire book.
After reading the help document I still cannot work out how to do this.
My questions are:
1. Do you have to use an InDesign document as a source for the list of topics? If so, should the document be added to the book file or outside it?
It seems a bit recursive to have the list of topics in an ID document that is in the book file.
2. Once you have uploaded the topics into the Index feature, how do you get it to look for all instances of that 'topic' througout the entire book? I can't figure that out from the help documents. What do I select? Do I do it from the Index panel? Do I highlight the text in the source document? Not sure how to do this...
3. I need the names to list surname first of the quoted authors in the index. This command seems to be different between various editions of ID. For ID CC 2014.1 is it ctrl+alt+shift+]
4. To make the surname show first, what do I highlight? The topic? and then do ctrl+alt+shift+] and select find all as well? Or do I have to just go through the text and manually do this and ditch the idea of uploading topics first?
I am confused as you can see and any help with this is appreciated.

Sorry 007, I really thought you were posting a trick question as on the OCP tests.
Anyway, as Justin mentioned, if you have an index on ename, it may be used when doing a comparison predicate statement with the ename value.
What it depends on are several other things: stats, how many rows in the table, use of an index hint, etc.
Rather than questioning the group on this, why not just turn on autotrace and run the query for the different scenarios.
The output will show you if it used the index, number of rows returned, blocks read, etc.
SQL> create table emp (ename varchar2(40));
Table created.
SQL> insert into emp select username from sys.dba_users;
25 rows created.
SQL> commit;
Commit complete.
SQL> set autotrace on
SQL> select * from emp where ename != 'SYSTEM';
Execution Plan
Plan hash value: 2951343571
| Id | Operation        | Name      | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |           |    24 |   528 |     1   (0)| 00:00:01 |
|* 1 | INDEX FULL SCAN | ENAME_IDX |    24 |   528 |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter("ENAME"<>'SYSTEM')As you can see, the above used an index, even though there were only 25 rows in the table.
You can test each of your scenarios, one by one, including use of a hint.

How to dynamically add/remove a button from the ribbon based on some condition? (Ribbon XML)

Hi,
I have a ribbon (done using ribbon XML) with menu options. I need to remove few buttons from the menu dynamically based on some condition. Also, I want to change the label of another button. How to achieve this programmatically? (C#)
Thanks in advance.
Thanks Prasad

Hello Prasad,
Use callbacks for populating Ribbon controls such as menu, dropDown, gallery and etc. Then you can use the
Invalidate or
InvalidateControl methods of the
IRibbonUI interface to get your callbacks invoked when required. Thus, you will be able to delete the required item(s).
You will find the following articles in MSDN helpful:
Chapter 11: Creating Dynamic Ribbon Customizations (1 of 2)
Chapter 11: Creating Dynamic Ribbon Customizations (2 of 2)
To change the label of your controls at runtime you need to use the getLabel callback and call the Invalidate or InvalidateControl methods of the IRibbonUI interface. The following series of articles describe the Fluent UI in depth:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

HT1414 my iPad did not came out the slide botton , how to make it back to normal , currently unable to used my ipad .

Hi ,
my iPad did not came out the slide botton , how to make it back to normal , currently unable to used my ipad .
History is my son try to enter too many time on wrong password .

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Grey out a particular row in ALV based on some condition.

Hi All,
How can we grey out the particular row in ALV based on some condition( I am using the function modules and not OOPS).
Regards
Ramesh.

Hello Ramesh
In this case you need to add a specific field to your structure:
TYPES: BEGIN OF ty_s_outtab.
INLCUDE TYPE <my table or structure>.
TYPES: CELLTAB TYPE lvc_t_styl. " name is arbitrary but this one is most frequently used
TYPES: END OF ty_s_outtab.
DATA: gt_outtab TYPE STANDARD TABLE OF ty_s_outtab
WITH DEFAULT KEY.
You can use the fieldcatalog to make an entire column non-editable (LVC_S_FCAT-EDIT = ' ' ).
However, in case of rows you need to inactivate all cells of this row. For sample coding please refer to thread:
How to conditionally set ALV field as hotspot
Regards
Uwe

Display Image(which set as behind text) based on some condition.

hi all
I have developed a xml report and in that rtf am displaying a static image (which is set as behin text).
But i need to display the image based on some condition
for example i have a field as ORG_ID
if org_id=87 then image should display for that purpose am planning to use <?if:ORG_ID=87?> condition but where to place this condition for the image.
kindly help me
thanks for all in advance.

that too not working because
on image am displaying some other fields.
see i think you didn't get my point.
in my out put page am displaying item details ,quantity,and cost and customer details just like invoice copy .
behind this data am displaying my company logo which will capture whole page size..
if i place the image in table then fields will be automatically in table so i cant restrict image in this way.
Kindly suggest any other way that works only for image which is behind text. i mean condition should be applicable only for image and leaving all other fileds in rtf.
or
help on this how to set a dynamic image as behind the text.
Edited by: maddy on Nov 28, 2012 7:32 AM
Edited by: maddy on Nov 28, 2012 7:35 AM

Display an exception based on some condition

HI..
how to run a exception based on some condition i.e
i want to highlight the sales(key figure) which r less than the average sales..
where sales and average sales r keyfigures...

Hi!
welcome to SDN.
create a calculated key figure which will be 1 if the sales is less then the average sales.
create exception based on this calculated key figure.
with regard
ashwin
<i>PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

How to make a region mandatory based on some conditions using CO Extension?

Similar Messages

Maybe you are looking for