How to make a SAP note compatibale for 4.6c which is designed for ECC6.0

Hi ABAP gurus
I have an OSS note :1093165 which is designed for ECC6.0 but i want to make that features available in 4.6c .how to do that ?any idea please suggest.

So, you want the features of ECC6 in 4.6c? That's quite interesting! You have not however mentioned few sample features. Perhaps you should talk to SAP for this.
Thanks

Similar Messages

How to make dyn/admin not to prompt for username and password?

Hello all
How to make dyn/admin not to prompt for username and password? I am writing a selenium job to automate cache invalidation to load test a production issue we are facing. Selenium is opening a fresh firefox session and prompting for username and password every time. I am also trying to modify my script such that it will use the same session again and not prompt for username and password. But I thought of asking this question in the group.
Your inputs will help a lot.
Thanks,
Sundar

Hi,
You can set enabled property of /atg/dynamo/servlet/adminpipeline/AuthenticationServlet/ to false. It will not prompt for authentication.
Gopi

How to make "payment terms" not modifiable in sales order

Hello every 1,
please help, i want to know:
how to make "payment terms" not modifiable in a sales order , as we know it comes directly from CMR and client wants "PAYMENT TERMS" to be not modifiable.
Look forward for your response.
Thanks in Advance,
Deepak

You need to use SHD0 or userexit chnages, like always determine from customer master, if user changes, give message like not modifiable or ask abaper to make non modifable field

How to make iTunes Match not convert my files ALACs in 256 kbps (VBR)? How to get iTunes to convert CDs to Apple loselss?

How to make iTunes Match not convert my files ALACs in 256 kbps (VBR)? How to get iTunes convert CDs in Apple loselss? The difference between 256 (VBR) and Apple Losless is very clear...

Dear Michael, good day!
1. As per your instruction, I turned off iTM.
Small discrepancy – where are two screens with iTM switch:
-Settings > iTunes & App Store.
-Settings > Music
I switched OFF in both.
NB: I turned device to English for convenience.
2. My next step was Setting > General > Usage – tapped {Music};
{All music} screen appeared; I swiped it and taped Delete.
3. I performed “hard reset” …………………………………..
4. Switched back On iTM
5. Taped Music app on Home screen
iTM has started – (it took 18 minutes to completed, 60 mbps Wi-Fi speed )
Regret to inform… All the same:
Erase and reset to factory default? Or I did smf wrong?

How to make a JScrollPane not getting Focus?

How to make a JScrollPane not getting Focus?
When i tab out from a textfield inside a scroll pane focus is going to ScrollPane .And if i press tab once more then only focus is going to other textField which is outside the scrollpane.
For me when i press tab from a text field inside a scrollPane ,i should go to textfield out side the scroll pane.
satish

Hi,
I've the same problem, that I have to double click on tab
to step from a textfield with a scrollpane to the next textfield in my panel.
I tried to implement a FocusListener on my JScrollPane, but without success.
Can you tell me in detail how to implement this listener ?
Kind regards
Andy Kanzlers

How we can see SAP NOTES

How we can see SAP NOTES .using which transaction codes we can able to see SAP NOTES.
Regards
Santhosh

Hello,
1)Use T.code SNOTE.
2) Use transaction code OSS or go to site http://service.sap.com
You should have OSS login and password.
Regards
Kiran

I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

Hi Bev,
Thanks for the the email - I understand now.
I would just like to ask another question with regards to my new order for complete Creative Cloud which you suggested. I have now pre-paid for a full year but I’m not
sure when I can start downloading the other APPS as they don’t seem to be updating on my current Creative Cloud account app display. It still shows my old configuration
of products (i.e. Photoshop etc) and my ‘activity stream’ relates back to 9 days ago.
Please let me know how to get my new order activated.
Thanks
Kevin Bartley
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

How can i implement sap note on crm

can anyone please tell me how to apply sap note for CRM?

HI Thomas,
1. Releases: A note can be modified in case more changes can be included. In that case, a new 'release' of the note will be created. In snote, you can also find the function 'downlaod the latest version'. This means snote will check the current release in OSS can download it.
2. Reference support pacakge: This is the support pcakge where the change in this OSS note is included. Any SP level equal or higher than that will make the note 'can not be implemented';
3. Correction Instructions: One note can have one or multiple correction instruction. Usualy they're for different releases (620, 640, 700 etc.). But sometimes the CIs are for the same release and they will be implemented into the system sequentially when the note is being implemented.
Normally, when you try to implement a note in SNOTE, go to the note browser, the note then has the 'implementation status'. ' can be implemented' means the note have the valid support pcakge level. 'cannot be implmented' means the note is already included the the support packages. "Not relevant' means the note changes a component which doesn't exist in the system.
Regards,
Satish Mathala

How to read any sap note?

Hi all,
i have a note number. can anybody tell me how can i read whats there in the note before applying i mean documentatin kind of thing.
thanks

Go to www.service.sap.com and in SAP support portal click on SAP Notes search. enter your username and password. then you can search for SAP Note.
You would require user id and password to access SAP support /market place.
If you are already in the project, check with the IT manager of the client to provide one
SAP Notes help you how to remove known errors from SAP Systems. They include a description of the symptoms, the cause of the error, and the SAP Release and Support Package level in which the error occurs.
Regards
Bala

How to test/Verify SAP Notes

Hi Gurus,
Appreciate if you could share on how to test/verify the following sap notes:-
1) 1330776
2) 1143177
3) 1271688
4) 1302928
5) 1329090
Thank you,
Green Choc

I generally agree with Mylene here, however this is also a special case.
If you read SAP note 888889 then you will see that it is an intentional "heads-up" from SAP to take a look into the related notes, and (as was before) not the case that you have to find the problem first to need to fix the program error in your system.
The related notes of 888889 are to my knowledge designed in such a way that you can install them using SNOTE without any manual corrections required, and they fix only undesirable SAP standard system behaviour without any reasonable chance of customer specific use of it being impacted.
Basically, it blocks a known (and published) security error.
> do you actually expect us to come up with follow-up notes of the ones you wrote down here and develop a test-scenario for them, too?
This is true. It would go on forever... Just dumping note numbers into the forum is not the intention of them.
I think the thread can be closed and more specific questions about the content of individual notes or risk rating of them etc can be asked, if required. Generally, if you look at the correction blocks you can anyway work out what's going on and would probably want to implement them as a result.
Cheers,
Julius

How to make A JButton not look disabled when it is setEnabled(false);

how do i make a jbutton not look disabled when i setEnabled(false) because when u disabled abutton it changes and takes away the frame of the button it self..is there a way to make it make a sound when its disabled and not take the frame away...example look at windows calculator when u have an answer for example 2 + 2 when the answer is displayed if u try to click the backspacebutton at this point it makes a sound..is this possible in java thanks

Why did you repost this question??????
You where given an answer in the other posting. You have not explained why the solution won't work and you haven't provided any further information about your question.
You also haven't listened to the other advice, you just reposted the question word for word.

How to make a JFrame not shown in taskbar

i want to make a frame not shown in taskbar (similiar to jdialog) when clicking a button how can i make it.

The main containers are JFrame, JDialog, JWindow.
JFrame shows up on the Task Bar, JDialog and JWindow don't.
You can't change the basic behaviour in Java code. Maybe you could using JINI, but I not nothing about that.

How to make a label not to blink in cwgraph plot area

I use CWGraph control in measurement studio 6.0. In my program, there is a interrupt, that draws a curve using PlotXvsY(xData,yData) and then display a label using TextOut() (VC function) in plot area .When running my program, the label blinked on the screen because every time drawing a curve earses the previous label. How to keep the label not to be earsed.Thank you.

Hi,
May be you can do like, create a timer, and in when timer expired trigger,
toggle the label's color
may be the below sample code -- when-timer-expired trigger
If Get_Item_Property( 'text_item4', FOREGROUND_COLOR )
      != Get_Item_Property( 'text_item4', BACKGROUND_COLOR ) Then
      Set_Item_Property( 'text_item4', FOREGROUND_COLOR, Get_Item_Property( 'text_item4', BACKGROUND_COLOR ) ) ;
Else
      Set_Item_Property( 'text_item4', FOREGROUND_COLOR, 'r0g0b0' ) ;
End if ;This i've done for textitem, same logic you can use for labels

How to make some rows not selectable in AdvancedDataGrid

Hi there,
I have an advanced data grid which allows to select multiple rows. I need to make certain rows not selectable dependent on the row data. How can this be done?
Help is greatly appreciated. Thanks in advance.
--Charmaine

Hi, You can view same demo here
Thanks and Best regards,
Pallavi Joshi | [email protected] | www.infocepts.com

How to make a SAP note compatibale for 4.6c which is designed for ECC6.0

Similar Messages

Maybe you are looking for