How to make a single multi-view clip from different cameras?

Hi,
I recorded one conversation between two people with two different cameras (i.e., a camera per person) and I'd like to create a single video clip where the two clips from the two cameras are positioned side by side, i.e., one clip of the two people talking. I tried creating a Multicam clip but I didn't see an option to export the sequence as a single clip (also there was no option of how to place the clips which suggested that Multicam clip may not be the solution for this).
Is there a way to do that in Final Cut Pro X?
Of course, this would also involve synchronising the two clips based on the audio waveform and then detaching the audio from the non-master clip.
Any advice and recommendations will be highly appreciated.
Cheers,
Katya

This may be helpful.
Russ

Similar Messages

How to make iMovie the default for importing from video camera?

I successfully imported 5 or 6 mini discs from the video camera, then on the next download attempt I saw a pop-up box. The box said something like "what program do you want as the default for downloading?" I was thinking iMovie, but apparently clicked iTunes (too many iTerms), and now when I put the camera into PC CONNECT mode, iMovie won't start up as it had before. How do iReverse my mistake and make iMovie the default again.
P.S. - I already tried Preferences in iMovie and in Finder.

If you are talking about having the default be Hebrew-Qwerty, then just make sure that in system preferences/language & text/input sources you have only one box checked, the one for Hebrew-Qwerty.
There is also an opportunity to choose this during initial setup, you have to click on a button to have it show you all the keyboard options, I can't remember.

How to store as single record data coming from different ods to cube

Hi All,
we have the scenario like .
Same contract values are uploaded from 3 ods to cube.In the cube this information is stored as 3 different records.
Is there any option having same contract no and same fiscal period values should be stored as single record in cube.
Thanks in advance.
Regards,
Shradda.

Hi Shradda,
On Performance Side .....consider below points
1. Indexes on Cube ( That delete indexes before load and create them after Load ).
2. Aggregate Design ( Decision on Base Aggregates, roll up Hierarchy , BW Statistics etc ).
3. Partition of InfoCube ( Basically decision on No. of Partition )
4. Data Package Size ( Always try to have larger Data Package so that preaggreation will reduce the no. of Data Records ).
Best is Service.sap.com on BI page u will find material for performance . THat will help you .
To assign points on the left of screen u will get radio buttons for assigning points for each person who has responded .
Regards,
Vijay

Syncing two video clips from different cameras.

When both video clips are on the timeline filmed with two cameras to get different angles, is there a a keyboard shortcut to move either clip one frame at a time, or while listening to the audio a way to move the clips incremently until both videos are in sync. Some of the filming I used a 'clap' method, but wasn't able to always do this. Basically I think I am asking for fine adjustments along the timeline via the keyboard, frame by frame.

You can select the clip in the timeline and press:
"." (dot) to move right by 1 frame
"," (comma) to move left by 1 frame
":" (colon) to move right by 5 frames
";" (semicolon) to move left by 5 frames
If you keep the key pressed the clip will slowly move either wy.
You can also select one clip in the timeline and type a number n: this will appear in a small window labeled Move; when you press Enter the selected clip will move n frames to the right. For example type 8 and Enter and the clip will move right by 8 frame. To move left by 8 frames type 8, left arrow, "-", Enter (to enter negative numbers (to move left) first enter the value and then add a "-" in front of the number).
Make sure the tool is the Selection Tool (arrow) otherwise instead of moving the clip you apply other actions (slip, roll, etc.).
Piero

ı have 2 account one gamecenter with single emaill and password.it is like a identical twins of different.how can ı make it single?

ı have 2 account one gamecenter with single emaill and password.it is like a identical twins of different.how can ı make it single?

Are you referring to 2 iTunes accounts/Apple ID's? If so you can't, all purchases are tied to each Apple ID so if you need to say reload an app or update, it would be with that account.

How to make a communication of two VIs from difference computers throught VI server?

how to make a communication of two VIs from difference computers throught VI server?
I have built the program which is attached at below. But it doesn't work. Can any one help me?
Attachments:
panel5.vi ‏82 KB

Hi Barry,
What do you mean "it doesn't work"? What kind of errors are you seeing? Also, you only specified the file name (data.vi) when opening a VI reference. Try specifying the whole path to the VI. Also, you might want to make sure you are able to ping your other computer from the start (to see if this is a LabVIEW issue or a network issue).
Hope this helps,
Travis H.
LabVIEW R&D
National Instruments

How to make Finder NOT to show files from a specific folder in "All My Files"?

Hello!
Can someone please advice how to make finder NOT to show files from a specific folder in "All My Files"? See the attach - I recently installed Civilization 5 from Steam and now I have a lot of unneeded files (*.log and *.ini) shown in All My Files colder in Finder.
I don't want to see them. Any advise?

Using "All my Files" was very handy before all this rubbish popped up. =(

How to make users to select the date from calendar control my making the date field read only in date time control in external list in sharepoint 2010

How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
be done through sharepoint desginer / out of the box.
thanks.

Congratulate you got the solution by yourself. I am new to a
WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
calendar date selection did me a great favor. Cheers.

How to make IIS on Windows 7 visible from outside my home LAN

Guidance Needed: How to make IIS on Windows 7 visible from outside my home LAN.
I am building a learning/demo ASP.NET website on this Win7 PC, using VS2008.
I would like to share the website with a client/friend, so I need my local IIS to be visible from outside the home LAN.
This PC is behind a Netgear WGR614 router, which has a static IP address assigned by my ISP.
I have set up port forwarding on the router; port 80 is HTTP.
I can see the website as http://localhost/ and also as http://192.168.0.2 from other PCs inside the LAN.
Ping works from outside, but not http. What am I missing?

Hi,
Since this question is related to IIS and we have specific support for IIS related issues or questions, it is also recommended that you go to IIS Forum for help.
Hope this helps. Thanks.
Nicholas Li - MSFT

HT1937 how to transfer downloaded videos or video clips from PC to iphone?

How to transfer downloaded videos or video clips from PC to iphone5?

You need to do it through iTunes, so connect the phone to your computer and then sync via iTunes.

How to make a redirect without auto-redirect from the portlet "edit" mode?

How to make a redirect without auto-redirect from the portlet "edit" mode?
I use some sofisticated customizing with server-side validation of the form data. I want to redirect to the page of the portlet "show" mode and to the "edit" mode depending on the validation results. How can I do it?

Heay.....this worked for me.
I am able to change the mode programatically from edit to show.
HttpPortletRendererUtil.handleEditAction(portletRenderRequest,"OK");
I removed Apply , OK and Cancel buttons and applied my own Submit and Back button in Personalize mode and then change the mode to show on click of Back button using the above mentioned statement.
Thanks
~Neeraj Sidhaye
Try_Catch_Finally @ Y !
ExtremePortal @ Gmail　Ｄｏｔ　Ｃｏｍ

How to make a button load a sprite from library??

PLEASE HELP!!
Hey everyone.. iv been looking for help for a few weeks but cant seem to find the awnsers
I am trying to create a newspaper that consists of four pages. Each page i have created and are sitting in the library as sprites. Each page has buttons that need linking so that when pressed it loads the next page or page that i want. This is the part i am confused with =/ how do i make the buttons on each page load the next page (sprite) from the library??
Basically i want to no how to make a button load a sprite from the library when clicked. Does anyone no the script for this?
Thanks for any help

A question arises as to whether or not you are posting in the right forum. Sprites are AS3 objects.
If you want to add movieclips to the stage from the library using AS2, then you need to assign them each an Identifier via right clicking them in the library and selecting the Linkage option... from there you slect the option to Export for Actionscript and then assign the Identifier.
You then use the attachMovie() method to make use of that Identifier to dynamically load the library object.

My clips from my camera became completely different later

I had clips from my camera that I put into imovie and it's just fine, then later on out of nowhere when I start it it says something like "this imovie projact is made for an older version of imovie, would you like to upgrade it and make it match your current version"
Strange thing is i never upgraded my imovie or anything and now I open it and the videos are in the trash, but isntead of the clips I have, it's dragonball z clips with the filename of my files which makes no logical sense. How can I get my clips back and why did this happen?

Hi
Not enough info (for me) to figure this on out.
• Any "Crash / Panic Halt" recently ?
• Any thing else updated eg Mac OS or QuickTime ?
• Free space on internal start-up boot hard disk - How much ?
Have You tested - to trash iMovie Pref file (while iMovie is NOT RUNNING) ?
Yours Bengt W

I can't import and view videos from a camera.

I can't import and view videos from a camera. Even if I open the file and copy the .avi files onto the hard drive. I have tried iMovie, Quicktime, and Flip player. Flip player will open it but I only get the audio, Quicktime freezes, and iPhoto tries to automatically import only to then error saying the files are not compatible.

Hello Hese,
try the following:
1. delete preferences (com.apple.iMovie.plist) and empty the trash
2. repair disc permissions with Disc Utility and reboot your mac
3. use Diskwarrior or MacJanitor for disc clean-up
4. disconnect any other firewire devices
5. take off any non-system desktop pictures
If nothing else helps, you might want to consider resetting your Firewire port(s)
How to reset your Firewire ports:
http://discussions.apple.com/thread.jspa?messageID=2001817&#2001817
hope this helps
mish

How can I download automatically only new images from my camera?

Hello,
I can not download only new images from my EOS 450D-camera with Elements 10-Photodownloafer (Mac os).
Each time I use Photodownloader it downloads all images , also those that were downloaded preveously
How can I set photodownloader?
Thanks for your advices

I share my card with my wife and she likes to download our images also on her PC, so erasing all images is not an option.
It seems that earlier version of adobe photo downloader has the feature "copy only new files" , but V10 does not.
Thanks for your answer
Mikele
Op 10-jun.-2012, om 15:33 heeft 99jon het volgende geschreven:
Re: How can I download automatically only new images from my camera?
created by 99jon in Photoshop Elements - View the full discussion
Don’t you format the card in the camera after each download? That will wipe all images and prepare the card for a fresh shoot.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4480409#4480409
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4480409#4480409. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to make a single multi-view clip from different cameras?

Similar Messages

Maybe you are looking for