How to make a starting picture ...
How to make a starting picture ( logo like Microsoft Word appear when click Word Item ) that start before application run
hi,
essentially you would not call it a starting picture, itz called a splash screen. you can create it in a very simple manner,
just follow the steps.
1. have a class that extends Canvas
2. add a jlabel and by adding a imageicon containing the image to the jlabel
3. have a timer or a thread, start the timer and at the same time show the canvas in the middle of the screen
4. and after some time, just close the window and show the main application window. (also stop the timer or thread)
you could of course make it better if you allow the setting of the image file and timeout to be set dynamically, but thatz of course not much of a problem.
hope this was useful.
cheerz
ynkrish
Similar Messages
-
In windows 7, how to make firefox start automatically when I turn on the computer
In Windows 7, how to make Firefox start automatically when I turn on the computer. Note, I am asking how to do this with Windows 7, not xp, not vista.
You need to place a shortcut to open Firefox in the Start > Programs > Startup folder.<br />
That is basically the same in all Windows versions. -
How to make the contact picture should appear on the upper right corner with thumb picture when some one calling instead showing the entire screen
See deggie's response in this post... https://discussions.apple.com/message/8531821#8531821
-
How to make a still picture rotate around a vertical axis ?
H there,
Can I know how do I make a still picture rotate around a vertical axis ?
ThanksThanks MTD,
It is indeed one good trick ...
From your timeline, it seems that you applied a transition after each clip. Can I know why & what transition you applied ?
Can you please elaborate what you meant by "I changed the last keyframe in the last clip to a Smooth" ?
Thanks again ...
Cheers
Meg The Dog wrote:
Hi -
While Mr. Wolsky is absolutely correct that you need the other software to do the effect you describe correctly, I believe you can make an approximation of what you want using FCE. Whether or not it passes the smell test is up to you.
You can see a clip I made [HERE|http://www.spotsbeforeyoureyes.com/3DTurn_Example.mov]
Because when you rotate the frame 360 degrees using the Y-axis, the image always comes back to the same position - which gives you a handy place to match cut to the next implementation of the rotation at a slightly slower pace. The last rotation was smoothed to a stop by modifying the filter keyframe to "Smooth".
So (not acounting for the pad video at the head and tail of the clip, a 1 second clip, followed by a 2 second clip, followed by a 4 second clip to give me a 7 second move.
!http://www.spotsbeforeyoureyes.com/3dTurnTimeline.jpg!
I applied the filter to the first clip, and set it so that it went from -360 to 360 in Y axis rotation. I then copied that clip and used Command -V to apply the same effect to the next to clips via paste attributes, UNCHECKING the Scale Attribute Times so that the spinning would slow down as the clips lengthened.
Lastly, I changed the last keyframe in the last clip to a "Smooth" , and added head and tail trim to the entire effect so the bars would start static, spin and the end static.
Like I say, it's far from perfect but may either point you toward a solution or trigger ideas of your own.
MTD -
How to make text start at the top of a page in livecycle 9
Hi, How can I get the text in a large text field to start at the top left of the field rather than at the center of the field? In addition, may one know how to make text wrap in the form as well?
Thanks,
DavidTo set the Text alignment properties use "Paragraph" pallet you can make it visible by selecting Window>>Paragraph or Shift+F5
And to allow text wrapping you need to select "Allow Multiple Lines" checkbox under "Object" pallet and "Field" tab. You can make Object pallet visible by selecting Window>>Object or Shift+F7.
Good Luck, -
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN - how to make it STARTED
Hi,
I have an ABAP+Java SAP ERP 2005 server.
After having made a Java Add-in installation w/o success, I stoped the installation.
Now in this server, process Dispatcher is always in yellow with status "Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable".
How can I fix this error to make J2EE started?
Here the trace:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid BP1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 102
intno 20050900
make: multithreaded, Unicode, optimized
pid 2724
Fri Sep 14 14:37:18 2007
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2724) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 102 successfully loaded
shared lib "dw_xtc.dll" version 102 successfully loaded
shared lib "dw_stl.dll" version 102 successfully loaded
shared lib "dw_gui.dll" version 102 successfully loaded
shared lib "dw_mdm.dll" version 102 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Sep 14 14:37:24 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAP0806_BP1_00 <
DpShMCreate: sizeof(wp_adm) 15752 (1432)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1520)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07AD0040, size: 4888864)
DpShMCreate: allocated sys_adm at 07AD0040
DpShMCreate: allocated wp_adm at 07AD1E80
DpShMCreate: allocated tm_adm_list at 07AD5C08
DpShMCreate: allocated tm_adm at 07AD5C38
DpShMCreate: allocated wp_ca_adm at 07EDF078
DpShMCreate: allocated appc_ca_adm at 07EE4E38
DpShMCreate: allocated comm_adm at 07EE6D78
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07F67C38
DpShMCreate: allocated gw_adm at 07F67C78
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07F67CA8
DpShMCreate: allocated wall_adm at 07F67CB0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3776
argv[0] = E:\usr\sap\BP1\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\BP1\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\BP1\SYS\profile\BP1_DVEBMGS00_SAP0806
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2604
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=BP1
argv[7] = -DSAPMYNAME=SAP0806_BP1_00
argv[8] = -DSAPPROFILE=E:\usr\sap\BP1\SYS\profile\BP1_DVEBMGS00_SAP0806
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( SAP0806) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >SAP0806_BP1_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Fri Sep 14 14:37:28 2007
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Sep 14 14:38:04 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Fri Sep 14 14:38:24 2007
J2EE server info
start = TRUE
state = STARTED
pid = 3408
argv[0] = E:\usr\sap\BP1\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\BP1\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\BP1\SYS\profile\BP1_DVEBMGS00_SAP0806
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2671
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=BP1
argv[7] = -DSAPMYNAME=SAP0806_BP1_00
argv[8] = -DSAPPROFILE=E:\usr\sap\BP1\SYS\profile\BP1_DVEBMGS00_SAP0806
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Sep 14 14:38:44 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWNHi Kalyan,
Unfortunately, I cannot find section "6.8.2.3 Deleting the Java Part of an SAP System" as you said.
All docs that I've just downloaded only have sections 6.8 & sub 6.8.1 as following:
- 6.8 Deleting an SAP System
+ 6.8.1 Running SAPinst to Delete an SAP System
Docs browsed are:
- Installation Guide - SAP NetWeaver 7.0 SR2 <b>ABAP+Java</b> / <b>Java</b> / <b>ABAP</b> on Windows - MS SQL Server
- Installation Guide - SAP SAP ERP 2005 SR2 <b>ABAP+Java</b> / <b>Java</b> / <b>ABAP </b>on Windows - MS SQL Server
So please show me the way to get the correct ones or send me via [email protected]
You answer is considered helpful.
Thanks,
Toan Do -
How to make servlet start automatically in tomcat
i want to my servlet start automatically when tomcat start . Need i configure the web.xml? how to make it?
Yes, web.xml is what you want to configure, if what you're wanting to do is browse to a particular URL and have your servlet executed. See the Tomcat site (http://jakarta.apache.org/tomcat) for examples.
Lynn. -
How to make custom start end shapes for stroke (arrowheads)...
hello...
Indesign cs4 have nice start end stroke shapes like arrowheads, circles, squares...circles is clear, without fill. I need fill in it.
How to make custom shapes or edit existings start/end shapes to functioning like original provided with indesign?
Maybe illustrator cs4 have this?There's no way to edit line endings in ID. You would have to make a compound path from a line with no ending and a second path or shape for the end.
-
How to make TM start a NEW backup
Since January and updating to 10.5.6 (not sure if that had anything to do with it), my iMac had been freezing up and required me to manually power off and on, at first a few times a week, later increasing to several times a day. I suspected a HD failure, but no hardware tests or SMART status tests indicated so. Since February, Time Machine has been doing backup. A couple of weeks ago I finally had time to do a reformat of the iMac HD and did a full reinstall and updated directly to 10.5.7. Since then I have had no freezing issues.
But. I now have the TM backup from February till mid-May on my external HD. I would like to keep it as it is, all 200Gb worth, and have TM start a totally fresh backup in a new folder.
After reading pages of information about TM, it seemed people have had trouble doing the opposite, i.e. make TM use build onto the backup which was already there. So I figured TM would do what I hoped; make a new folder in the Backups.backupdb folder with the new computer name (I changed the name on purpose when reinstalling).
I set up TM preferences to use the same disk as before, as there is still more than enough space. I was surprised to see what happened:
- The backup folder name changed from the old "EX iMac" to the new installation's name "Exxx Xxxx's iMac".
- A new dated folder (....inProgress) was created, but with the same date as the last backup made from the old installation a couple of weeks ago, rather than today's date.
I cancelled the backup right awayas this wasn't what I was expecting, so the "folder" name is still "2009-05-16-124351.inProgress"
- When I enter TM through the UI, the HD name has been changed for all the old backups (used to be "Macintosh HD", is now "Mac HD ny").
So it seems that TM in its wisdom recognizes the iMac as its old self, and wants to continue building onto the old backups. This is exactly what I don't want... when space runs out on the external HD, I don't want the old backups to be pruned at all. I want to keep the old backup as-is, for future reference etc., and have TM start a full, fresh backup of my near-empty iMac, which it can do its incremental and space-saving thing with later on.
Any ideas as to how I can persuade my computer into agreeing that this is a worthwhile concept?Pondini wrote:
Just why do you want to prevent TM from deleting old backups? If it's because you've been deleting things from your internal HD, trusting TM to keep it's copies indefinitely, that's not a good idea.
The reason is, TM's copies are no longer backups: now they're your originals. When (not if) your TM drive fails, you may lose all of them.
Thank you for your input. As I wrote earlier, I have reformatted the internal HD and reinstalled a "blank" system. So yes, most files, documents etc. are now found only in the TM backup. One reason for not simply doing a full restore from the TM backup was to allow time to make sure the internal HD was not in fact failing, and being able to reintroduce things step by step in case the problem should materialize again.
The whole point of wanting to keep the existing TM backup as-is is to make it be there "indefinitely". That doesn't mean I trust the external HD to keep it safe for all eternity, but as long as I am trusting it to back up my stuff, why not let it keep my old stuff as well? Although, admittedly, it is space consuming and the important stuff will be present in both the old and the new backup, once I get it running. Old backup > iMac > New backup. You should see how many papers I have in my shelves from years back -
How to make a good picture/video movie
i have a camera that has taken 4000x3000 pictures and 1280x720 HD videosand want to make a HD DVD movie
i wanted to use premiere pro for making this movie because ive become slightly used to it
i am using this on a 1600x900 17-inch laptop
but i cant see the full pictures in ppro, i can add them but only a ~quarter gets shown and even i export it, it doesnt show everything
how can i make this work or is there another product that can do this?
is there a setting i can change to make this work?
thnx for ur help>camera that has taken 4000x3000 pictures
Photo Scaling for Video http://forums.adobe.com/thread/450798?tstart=0
-Too Large = Crash http://forums.adobe.com/thread/879967?tstart=0 -
How to make animated/moving picture movie
I have Quicktime Pro and Im trying to make a simple JPEG or GIF image that consists of many images and creates a moving picture. If I create the image sequence using the pictures, how can I save it as a JPEG or GIF so that I can upload it to Myspace or something similar? Thanks!
GChttp://www.lemkesoft.com/
-
How to make letter profile picture?
How do I make photos like this? Help would really be appreaciated. The pictures and profile picture of twitter @slollz
If you mean image like this It look like a gray/black background with a letter path stroked on it. Over that layer is an composite image layer. This later has two layer mask one a vector mask that hide the layer but for the area inside the letter. A second hide all raster layer mask that was painted on with white to let the image subject girl show.
-
How to make the start of Disco Plus / Viewer faster
Hello,
I open a workbook via link in Discoverer Viewer. It takes 30-60 seconds until the workbook opens.
I have to say that the whole environment is running on a laptop with 1,5 GB Ram (for a showcase). Is there an option to make it faster? I'm a little confused because when I manually start Discoverer Plus and then open the workbook it does not take so much time.
regards,
TobiasToki.
One other 'trick' you can perform for making the actual query run faster once you've connected - for demo purposes only - is to not use 'real data' with many tables, views, etc. but to dump the data you want into one table. In otherwords, you create a table that has the actual data that you would get from a query, querying say 3 tables.
Then when you're demo'ing, you get instant response as you're only using 1 table.
This is done by a well known company when they're trying to show off their product against an Oracle database and querying with various query tools including Disco.
Russ -
How to make the start up faster?
I bought my MBP on April. During the first couple of weeks, the start up was impressive! So quick! But after I installed couple of programs I use at uni, it start up seems to slowed down a bit. Recently I installed Flash, Photoshop, Dreamweaver and couple of other Adobe products. Now the start up is significantly slow compare to before. I was wondering if the services from these programs are running during the startup. So I disabled them via "Login Items". But I'm not too sure if it stops them completely.
Any suggestions to make start up faster?Is it still showing up in your ad-on manager?
-
How to make and start a session on Visual web JSF
Hi;
I am trying to make a Session on Visual Web JSF but cant get it, just get code to jsp, plz could u help me :)
Thanks on advace
Miguel Villalobos.Pondini wrote:
Just why do you want to prevent TM from deleting old backups? If it's because you've been deleting things from your internal HD, trusting TM to keep it's copies indefinitely, that's not a good idea.
The reason is, TM's copies are no longer backups: now they're your originals. When (not if) your TM drive fails, you may lose all of them.
Thank you for your input. As I wrote earlier, I have reformatted the internal HD and reinstalled a "blank" system. So yes, most files, documents etc. are now found only in the TM backup. One reason for not simply doing a full restore from the TM backup was to allow time to make sure the internal HD was not in fact failing, and being able to reintroduce things step by step in case the problem should materialize again.
The whole point of wanting to keep the existing TM backup as-is is to make it be there "indefinitely". That doesn't mean I trust the external HD to keep it safe for all eternity, but as long as I am trusting it to back up my stuff, why not let it keep my old stuff as well? Although, admittedly, it is space consuming and the important stuff will be present in both the old and the new backup, once I get it running. Old backup > iMac > New backup. You should see how many papers I have in my shelves from years back
Maybe you are looking for
-
Restrictions in DataSource 0CRM_COMPLAINTS_I
Hi, We are working with standard DataSource 0CRM_COMPLAINTS_I. I've found out that it extracts only items with following OBJECT_TYPEs: BUS2000160, BUS2000161, BUS2000162, BUS2000165 and BUS2000167. But we need to upload all items. When I'm trying to
-
SAP LSO - Time integration; Error Participant not available during course
Dear Gurus, I have requirement to enable employees to book the course irrespective of the Workshedule he is available in. Please let me know how to acheive it. Thanks and regards Saravanan K
-
Is it possible to create a rotating object in Muse?
Is it possible to create a rotating object in Muse? I have a round logo and I want it rotating.
-
Configuring Server DNS for Mail on Google Apps
I'm trying to configure the DNS on my Snow Leopard Server for mail.mydomain.com to point to Google for Google Apps mail hosting. I thought I could go into mydomain.com and put an alias record to point to ghs.google.com, but that's no longer working.
-
Get back the variable environment (Subsitution) from Essbase
Hi all, How to get back variables of environment stored in Essbase to reuse them in ODI. I think of using a view in ODI, is it possible to use them in the request of creation of the view sight. Thanks, Ben