How to make a table color or back ground image go on forever

How do I make a table go on forever (to the right)? I know
you can edit the size of the table, but if you make it larger than
your own computer screen it makes you have to scroll left and
right. I want to know how do I make a table go on forever with out
making someone with a small screened computer have to scroll left
and right.
Thanks.,

You can't. What is it you are trying to accomplish?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"-Michael--" <[email protected]> wrote in
message
news:eddbh5$a45$[email protected]..
> How do I make a table go on forever (to the right)? I
know you can edit
> the
> size of the table, but if you make it larger than your
own computer screen
> it
> makes you have to scroll left and right. I want to know
how do I make a
> table
> go on forever with out making someone with a small
screened computer have
> to
> scroll left and right.
>
> Thanks.,
>

Similar Messages

  • How to make stork table in Mac numbers

    hello,
    how how to make stork tables in numbers just as what we can creat in windows excel?
    thank you

    Another way to create this type of chart is to create the pieces in separate charts and then layer them. 
    You create two stacked bar charts.  There are two rows of values in each.  The color of the bottom value is set to "no fill" to create the floating bar effect. 
    The width of the stick bar is changed by setting the gap to the maximum allowable (999%).  The "stick" chart is placed behind the other.
    For this to work, they need to be the exact same size and with the same axis values.  Setting the axis to have fixed values makes this easier.  Also, it improves the appearance to limit all the axis labels and lines to be in just one of the charts.

  • During initial setup, I deleted the additional colored options in the Calender application. How do I get those colored options back? Thank you!!

    During initial setup, I deleted the additional colored options in the Calender application. How do I get those colored options back? Thank you!!

    Sounds like you have the print dialog minimised, as shown.
    If you click the triangle next to the printer name, this will expand the print dialog and from this view you can see all the menu options as mentioned in the guide.

  • How to make the table scalable inside a tap control?

    Hi,
    Does anyone know how to make the table scalable inside a tap control in LabWindow CVI? I see that there is option for a panel to scale contents on resize, but not available for a tab control. Any ideas?
    Thanks a lot!
    Weiming
    Solved!
    Go to Solution.

    Hi SGIE,
    you have posted a LV-related question to the LabWindows/CVI forum: you should post it in the LabVIEW forum instead.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Well how I make Rounded Table Corners (html) ?

    I use dmwr mx 2004 , well how I make Rounded,Table,Corners
    (html) ? CSS TABLES can be with Rounded Corners ?

    On Wed, 12 Dec 2007 16:40:01 +0000 (UTC), "123polis123"
    <[email protected]> wrote:
    >I use dmwr mx 2004 , well how I make
    Rounded,Table,Corners (html) ? CSS TABLES can be with Rounded
    Corners ?
    No - you have to use images.
    as already said - just google for more info
    http://www.google.co.uk/search?hl=en&q=round+corners+on+websites&btnG=Google+Search&meta=
    ~Malcolm N....
    ~

  • How to Run a Custom Transaction in Back Ground after give the Input?

    Hi,
        I have problem that how to execute a Custom Transaction in Back Ground after end user will save a variant for input. In my Transaction there is no menu to save a Variant & to Execute in Back Ground.
    Please suggest me how to do this in my Custom Transaction.

    Hi Ramana,
    what kind of report you want to  execute? the report is Executable Report or Modulepool prog. ??
    if it is a executable program so when u execute (F8) from SE38 when u find the selection-screen in the menu bar ->Program ->Execute in Background( F9) option exits there u can schedule your report in Background or else use toce SM36 ( Define Background Job).
    Why you want to run it in background with transaction code if you have this options?
    Regards,
    Sunil kairam.

  • How can I discover a color saturation in an image?

    My name is Eduardo, from São Paulo/Brazil. I'd like know how can I discover a color saturation in an image? For example, I open an image in photoshop CS6 and I'd like to know what a color is more saturated for after to do a treatment with color balance. I tried to use a Color Sample Tool in Photoshop, tried to find some articles and techiques on Google, but without success.
    Somebody help me?

    Hi Eduardo,
    Try looking at the Color window.  You can find this by going to Window -> Color.  In the Color window, you can use the eyedropper to select a color and see the color information displayed.  See the screenshot. 
    Hope this helps!

  • How to make an app a file receiver for images on iOS?

    Hi,
    How to make an app a file receiver for images on iOS?
    I did it for the Android app.xml like this:
    <intent-filter>
            <action android:name="android.intent.action.SEND"/>
            <category android:name="android.intent.category.DEFAULT"/>
            <data android:mimeType="text/plain"/>
        <data android:mimeType="image/jpg"/>
        <data android:mimeType="image/jpeg"/>
        <data android:mimeType="image/png"/>
        <data android:mimeType="image/gif"/>
    </intent-filter>
    How to do it for iOS?
    (I'm using Adobe Air 4.0)
    Thank you!

    What app have you used to create your ibook?  Normally any app will have a menu item like File > Export that will give you the option of PDF, or you can use Print and there will be an option in the Print dialogue to Print to PDF.

  • How to use WS_DOWNLOAD funciton module in back ground (Batch Job)

    Hi all,
        Can any one tell,
    How to use WS_DOWNLOAD funciton module in back ground (Batch Job)
    Thanks,
    Ravi Kumar.

    As disussed above you can use DATASET techniques to write the file to the application server. Then you could do a bdc call to Transaction CG3Y to transfer the file to the presentation server.
    Just F1 help on keyword DATASET in SE80 for more information.
    BDC Call Info found here: <a href="http://www.sap-img.com/bdc.htm">http://www.sap-img.com/bdc.htm</a>
    Regards,
    Philip Johannesen

  • ALV: How to make a column color

    Hi.
    How to make a particular column of any one color in
    list dispaly and grid display

    Hi osk,
    1. Row wise color is possible.
    2. Not only the full row color,
      we can also manipulate the color in each cell.
    3.
    IMPORTANT THINGS
    a. Extra field in internal table
    clr TYPE slis_t_specialcol_alv,
    (this field will contain the colour codes)
    b. assign fieldname to alv layout
    alvly-coltab_fieldname = 'CLR'
    c. work area for colour
    DATA : clrwa TYPE slis_specialcol_alv.
    d. Populating the color
    Once again
    Loop at ITAB.
    *********logic
    if itab-field < 0 "---negative
    clrwa-fieldname = 'FIELDNAME'. "<--- FIELDNAME FOR COLOR
    clrwa-color-col = 6. <------- COLOUR 0-9
    APPEND clrwa TO itab-clr.
    MODIFY ITAB.
    endif.
    ENDLOOP.
    5. just copy paste in new program
    6.
    REPORT abc .
    NECESSARY / MUST
    TYPE-POOLS : slis.
    DATA : alvfc TYPE slis_t_fieldcat_alv.
    DATA : alvly TYPE slis_layout_alv.
    ITAB DECLARATION
    DATA : prg TYPE sy-repid.
    DATA : BEGIN OF itab OCCURS 0.
    INCLUDE STRUCTURE t001.
    DATA : clname(3) TYPE c,
    clr TYPE slis_t_specialcol_alv,
    END OF itab.
    DATA : clrwa TYPE slis_specialcol_alv.
    PARAMETERS : a TYPE c.
    DATA : flname TYPE slis_fieldname.
    SELECT
    START-OF-SELECTION.
    SELECT * FROM t001
    INTO CORRESPONDING FIELDS OF TABLE itab..
    LOOP AT itab..
    IF SY-TABIX <= 5.
    itab-clname = 'C50'.
    ELSE.
    itab-clname = 'C30'.
    ENDIF.
    MODIFY itab.
    ENDLOOP.
    LOOP AT ITAB.
    check itab-bukrs = '1000'
    clrwa-fieldname = 'BUTXT'.
    clrwa-color-col = 6.
    APPEND clrwa TO itab-clr.
    MODIFY ITAB.
    clrwa-fieldname = 'LAND1'.
    clrwa-color-col = 4.
    APPEND clrwa TO itab-clr.
    MODIFY ITAB.
    ENDLOOP.
    prg = sy-repid.
    flname = 'CLNAME'.
    alvly-info_fieldname = 'CLNAME'.
    alvly-coltab_fieldname = 'CLR'.
    LOOP AT ITAB.
    if sy-tabix = 3.
    clrwa-fieldname = 'BUTXT'.
    clrwa-color-col = 6.
    APPEND clrwa TO itab-clr.
    MODIFY ITAB.
    clrwa-fieldname = 'LAND1'.
    clrwa-color-col = 1.
    APPEND clrwa TO itab-clr.
    MODIFY ITAB.
    endif.
    ENDLOOP
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
    i_program_name = prg
    i_internal_tabname = 'ITAB'
    i_inclname = prg
    CHANGING
    ct_fieldcat = alvfc
    EXCEPTIONS
    inconsistent_interface = 1
    program_error = 2
    OTHERS = 3.
    minimum
    *CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    it_fieldcat = alvfc
    TABLES
    t_outtab = itab
    EXCEPTIONS
    program_error = 1
    OTHERS = 2
    extra
    sy-uname = 'XYZAB'.
    prg = sy-repid.
    Excluding
    DATA : excl TYPE slis_t_extab.
    DATA : exclwa TYPE slis_extab.
    exclwa = '&OUP'.
    APPEND exclwa TO excl.
    exclwa = '&ODN'.
    APPEND exclwa TO excl.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    it_fieldcat = alvfc
    i_callback_program = sy-repid
    is_layout = alvly
    i_callback_user_command = 'ITAB_USER_COMMAND'
    it_excluding =
    excl
    i_save = 'A'
    TABLES
    t_outtab = itab
    EXCEPTIONS
    program_error = 1
    OTHERS = 2.
    *& Form itab_user_command
    text
    -->WHATCOMM text
    -->WHATROW text
    FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
    slis_selfield.
    BREAK-POINT.
    ENDFORM. "itab_user_command
    regards,
    amit m.

  • How to make custom icc color profile work as default for all users?

    Hi!
    I've calibrated two monitors for the machine running Mavericks OS X. I've managed to move these custom icc color profiles to ColorSync folder in HDD Library, so that that they are available for all the users. However, I cannot figure out how to make these icc profiles work as default profiles for all users and not only the one I used to calibrate monitors.
    Is there a specific place I have to put custom icc profile to make it system default?
    Thank you!

    If you put the profiles in the root /Library/ColorSync/Profiles/ folder, then each user needs to select them in their account. There isn't a way to apply them globally so each account automatically comes up that way.

  • How to make the Text Color in Smartform

    Hi All , I have couple of  things.
    1)   I need to make text Red color for display in smartform.How can i go and display the text in the red color.
    2) For the same text i need two languages.ie if the vendor is English then text need to be displayed in English  .if the vendor is German then text need to be displayed in German.
        If any one have solution for above issues please help us.
    Regards
    Channappa Sajjanar

    Hi Channappa,
    For langauge translatios you have to use SE63 tcode.
    You have to choose red color for u r u r character formats.
    That changes you have to do in smart styles.
    To do the changes in u r smart style go to form attributes.Double click on form attributes.
    In style u will see u r smart style.
    Double click on smart style.
    There u can give u r desired character format.
    Let me know if you have any questions.
    Edited by: vinay raj on Apr 29, 2009 2:55 PM

  • How to make a table in java without using GUI??

    how can i make a table in java without usinf GUI, just simple codes??
    NAME ID NUMBER ADDRESS STATUS

    If you simply want to store them internally, you don't want to use a table.
    Make a simple class with properties id, name, number, address, status. Then create a Hashtable that indexes instances of the class by id or some other property.

  • How to make links different colors

    I can't figure out how to make one link a different. 

    You need to define a set of link states (link, visted, hover, active) for each ID or class name required.
    Let's say you want to have red links in your #header and white links in your #footer.
    CSS:
    #header a {text-decoration:none}
    #header a:link {color:red}     /**unvisited**/
    #header a:visited {color:gray} /**visited**/
    #header a:hover,               /**on mouse over**/
    #header a:active,              /**on click**/
    #header a:focus                /**on tab key**/
        {text-decoration:underline}
    #footer a {text-decoration:none}
    #footer a:link {color:white}
    #footer a:visited {color:yellow}
    #footer a:hover,
    #footer a:active,
    #footer a:focus 
        {text-decoration:underline}
    HTML:
    <div id="header">
    <a href="some-link.html">Link in the header</a> |
    <a href="some-link.html">Link in the header</a> |
    <a href="some-link.html">Link in the header</a> |
    </div>
    <div  id="footer">
    <a href="some-link.html">Footer link</a> |
    <a href="some-link.html">Footer link</a> |
    <a href="some-link.html">Footer link</a> |
    </div>
    For more on CSS pseudo classes:
    http://www.w3schools.com/css/css_pseudo_classes.asp
    Nancy O.

  • How to make true two-color image from scanned rgb image...

    hello...
    I have 50 scanned images from one book, cyan + black, offset. How to easy make new two color (C+K) from this rgb images? If possible to make action.
    sample:

    How to easy make new two color (C+K) from this rgb images?
    Not at all. They need extensive adjustments long before that - they are scanned wrongly to begin with (double-sided must be scanned against a black background), have fingerprints and whatnot. Once you have them cleaned up, converting to CMYK and cleaning up the colors is anotehr matter. Could be as easy as blanking out the yellow and magenta channels, could entail additiojnal extensive work. in any case, it won#t probably be automatic.
    Mylenium

Maybe you are looking for