How to make a Video loop with FCP Express?

Hi everybody. I need to make a lot of shorts videos with jpgs extracted from a main video. But those jpgs videos must be done as a loop that will returns and plays again forever (the videos will be placed in a web site) Is that possible, and if it is, what I need to do to obtain that loop?.
Best Regards.
Julian Laffont.

Hi Tom. It's not for my web site. Is for someone else . I don't know what to do or say. Should I make a video with the jpgs and tell them that they need to use the looping application of their web site? (I don't know if they have that application) Also Will be good to know if there is a specific format of video that loops in the web sites?. Wich one will be.QTM, WMV I don't know.
Thanks.

Similar Messages

How do I make a video loop in FCP?

Hello good folks,
I've been using FCP for a few years, but none of my clients requested a video loop ever before, therefore, I don't know how to do it. In the project I'm actually working on, my client wants me to activate that function in the final product; do you guys have any suggestion in this matter?
Thank you very much in advance

Actually, there is as issue that needs to be explored here. Does your sequence begin and end in black? If so, CaptM's method will work just fine. You may see a short hiccup at the loop point as most dvd players will hold a still frame that is probably just a field momentarily, but it probably won't be that noticeable. If you want to loop a video seamlessly, you should repeat the clip in the track as often as possible to fit on a dvd. And then setup the end jump for the track to go back to the beginning of the same clip. This loop point may be noticeable but all the others will be seamless.

How to make a render farm with FCP X / Compressor??

Wondering how to setup a min render farm with FCP X on three machines. Played around with setting in Compressor but never see any machine available when I go to render on each machine?

Ok, so I'm using the wrong terminology.
I want to have all my machines transcode for me, is this possible, yes or no and how do I set it up. I've buggered around with all the settings in the link above but I'd get anything to show up?
Also I believe that compressor needs to copy the entire file to be rendered over the network for the other machine to work on it - is this correct ? I'm on wifi guess I could connect machines together via ethernet.
I'm looking at 4x time to do a simple render on prores proxy material and when I have to do it on a 2 hour wedding video I'll be looking for the nearest bridge to jump off!

Help on how to make an infinite loop with the same space on all images

HI:
I made a movie clip with infinite loop in which there are images that move from right to left something simple like a marquee, and each image has a blank space between them, but between last and first image there is a more space, how I can do to make all images have an equal space between each one and that the motion never stops.

Thanks for your time and answers my friend, but I'm still not be able to achieve what I want, I forgot to tell that I'm doing this by layers, let's say, I have 5 images, (in fact I have like 50 images converted to movie clip symbols) each image has it's own layer, layer 1, layer 2, layer 3, layer 4, layer 5, then I put a 200 frame motion tween on all layers at 30 fps, then I arranged layer 1 on the first frame to the frame 200, the second layer from frame 50 to frame 250, third layer from frame 100 to frame 300, fourth layer from frame 150 to frame 350, and fifth layer from frame 200 to frame 400, by this I mean I put a 50 frame of space on each image but if you can see, the last image has a duration from frame 200 to frame 400, and there's nothing on frame 250 where it is supposed to be another image to match the same blank space of all the others, the movie clip restarts on the frame 400, and there's a 150 frames of blank space between the last image and the first image, I put the gotoandplay on the frame 250, but it abruptly restarts the movie.
Is there another way to do this ?
Am I doing something wrong ?
Please I really really need help on this.
Thanks

How to make a video and picture loop

I am trying to make a loop of video footage and pictures for my personal training studio to play in the foyer constantly. How do I do this. I am using itunes from my desk top to the apple tv. I cant figure out how to get photos and videos on my itunes library. THen how do you organize them and make it loop? Thanks to anyone who can help.

If you want to make a video loop you would need to use iMove, or some other video editing app for that. Then add that video to iTunes under movies.

Compressor 4.1.3 haven´t the option allow frame reordering, how i do to make a video h264 with the profile baseline 3.0?

Compressor 4.1.3 haven´t the option "allow frame reordering", how i do to make a video h264 with the profile baseline 3.0?

Strange, in this new version 4.1.3, i don´t find quick time settings in the inspector, help me please!

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening.

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?

here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
Here is the link;
http://www.photosync-app.com/

Can anyone tell me how to make a video clip in color transition?

Can anyone tell me how to make a video clip in color transition like the opening of "Oh Brother where art though" ?
You know the scene at the start where it starts off Black and White then as we move down the timeline it transitions to a rusty brown gradually.
It's on the Apple site for FC Studio as a promo clip.

how to do a keyframe trasition in the Color FX room
I realize that you can "add" keyframes to the timeline in COLORFX, but I don't believe they are always observed, and then they usually disappear in retrieved projects, and aren't persistent if you leave the room. To remember where they are... you might mark in a keyframe on those frames in another room as a pathfinder. The behaviour is consistent with a creature of the six-legged variety.
Method 1. If you are trying to taper the effect (any effect) in COLOR FX, the most linear approach is to render two versions of the clip; one "with", one "without" and do an opacity fade once you have returned them to Final Cut. This gives you the most control, flexibility, repeatability and consistency.
Method 2. You may attempt to keyframe the bleach bypass settings within the node itself -- the preset that comes with COLOR doesn't have any controls, but the Nattress plugin does.
Method 3. Set up a "blend" node with your bleach bypass feeding one of the inputs and leave the second input to default to the untreated video... keyframe a transition from "1.00000" to "0.00000" and that should work.
Note: the keyframe timeline markers will disappear from the timeline if you exit the clip, but the effect is likely to persist. At least that was what was happening a couple of minutes ago... for me, the effect and blend performed the transition just like it was previewing when rendered. This strategy is subject to being created and rendered "on the spot right now", and I advise making sure you have your renderqueue settings ready to go... load the clip from the COLORFX room using the Mac command bar at the top of the screen and render it right away. Don't try to save it for later. Just Do It.
An announcement went around about two weeks ago that Mr. Deakins' website was back up and running, so give him another try... poor guy has been swamped probably doing Dreamweaver maintenance... yeah, that must be it...
jPo

HT4642 ios numbers:how to make cell height variable with auto line brake setting ?

ipad numbers; How to make cell height variable with auto line break setting?

That's strange. I responded earlier and the whole message got trashed. Hence the test post before retyping the entire thing again.
Thanks for the reply.
The video clip is a single screen capture video clip. This is what I've found by playing around with this more.
The original clip resolution is greater than 640x480. If I use QT Pro to convert the original clip to 640x480 and then use either Flip4Mac or PE7, then the resolution looks good.
Just trying to figure out if should keep all workflow on the MacOS side. There are several different version of Flip4Mac. $49 gives me 640x480, but if I ever want to make it slightly larger then I would need to go with the $99 or HD version.
I also tried to export to AVI with QT Pro and the import with Windows MovieMaker but it didn't work really good. I liked the simplicity (since PE7 hogs a lot of resources especially through VMWare).

How do you burn videos taken with myIphone and stored on my computer to a DVD disc. I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"? I alos tried using Real Players file converter with no success!

How do you burn videos taken with my Iphone 4S and stored on my computer to a DVD disc. I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"? I also tried using Real Players file converter with no success! Thanks in advance for any help you can give!

Probably the OP is no longer paying attention to this unless the OP is subscribed to this discussion. While not really an iPhone question I guess using an iPhone to produce the movie which then needs taking to the next step makes this as good a starting place as any unless you happen to know enough about what to do to determine in which forum to post. A suggestion in that direction would help.
Anyway, Apple is backing off from supporting optical media. It also depends upon what you mean by "DVD". A DVD is just an optical disc which can support different file formats, but many people think it means a movie disc you can put in your TV. Producing a movie disc requires special iDVD authoring software Apple used to sell but stopped several years ago. I don't know if the old versions work under newer systems. There's also the free Burn application which authors DVDs but takes a bit of learning and has nowhere near the features of iDVD.
If the OP means simply burning the transferred movie files to a DVD for archiving in computer format you don't need special software for that; its built into the operating system File > New Burn folder etc.

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

How to make a PDF form with expanding tabel or expanding fields, like in Word.

How to make a PDF form with expanding tabel or expanding fields, like in Word.

This is currently not possible in Formscentral. It is something we are working on for the future. Please stay tuned.
Andrew Yarborough

Is their any tutorials on how to make a navigation bar with drop downs in Dreamweaver CC now ?

Is their any tutorials on how to make a navigation bar with drop downs in Dreamweaver CC now that they do not have the spry option?

bbull2005 wrote:
Preran, why wouldn't Dreamweaver include it's own menu/navigation bar widget?
I can't answer on Preran's or Adobe's behalf, but I think you'll find at least part of the answer here: http://wiki.jqueryui.com/w/page/38666403/Menubar
Adobe decided to discontinue development of Spry in August last year, and Dreamweaver CC made the switch to using jQuery UI widgets and effects. One reason for dropping Spry was that it failed to work correctly in some browsers. Judging from the fact that the jQuery UI menubar is now "on ice", creating a flyout menu that works reliably across all devices is proving more difficult than originally envisaged.
Because all other widgets in Dreamweaver CC use jQuery UI, it's a reasonable assumption that Adobe hoped the jQuery UI menubar would be ready in time, but it wasn't.

How to make the video looks greenish ?

Hi there,
Can I know how to make a video looks bit greenish ?
Thanks

Thanks Karsten,
Can I know, if I have about 60 cuts on the timeline and I want all the 60 cuts to be greenish, how do I apply to all at one go (instead of having to do one by one for 60 times !) ?
Thanks again
Karsten Schlüter wrote:
first 3 options coming to mind
a) ready made: under Effects 'Nightvision' (switch-off the mask)
b) almost ready made: under Effects, 'Colorize', set color to green
b) Color Board, Color, push general to green

How do you start a loop with an event and end the loop when u release ....

How do you start a loop with lets say an event of some sort, whether it be holding down a key or pressing the mouse click and then stopping the loop when you release that key or mouse button.?
double c = 1.8, i = 1, max = 90, exp = 0;
final double inc = 0.002; //speed at while it increases
boolean f = false, g = false;
while (true)
    while (f == false && stopMeter == false) //increasing speed going up to 90
        exp = Math.pow (c, i);
        i += inc;
        pAngle.setText (Math.round (exp) + "");
        if (exp > max)
            f = true;
            g = false;
        } //end if
    } //end while
    while (g == false && stopMeter == false) //decreasing speed going down from 90
        exp = Math.pow (c, i);
        i -= inc;
        pAngle.setText (Math.round (exp) + "");
        if (exp < 1)
            g = true;
            f = false;
        } //end if
    } //end while
} //end whilethis is a snippet of my increasing increments. Its for an angle meter. I can't get it to stop, when the user clicks or does something... the program just gets stuck in an infinite loop. I am still new to java and i do not know how to fix this.

You are in the wrong forum. Try this one instead: http://forum.java.sun.com/forum.jspa?forumID=31
/M

How to make a Video loop with FCP Express?

Similar Messages

Maybe you are looking for