How to make a wsrp producer ?

Hi,
what are the actions to make a WSRP producer from a JSR168 portlet
within the portal ?
I know how to make a consumer but I can't find the documentation to make
the producer.
Denis

If you build the domain using Weblogic SP4, then it is automatically a wsrp prducer

Similar Messages

How to make Web module produce different-sized JPEGs for different pictures?

Hi --
Googled this question, searched the "help" on Lightroom, searched Adobe, downloaded the latest version of Lightroom, searched this forum, no help, so I'm asking:
I'm using the Web module in Lightroom (which I've already used to create five other sites) to put together a site. Normally, I just set the JPEG size to "1024" with the "Size" slider under "Image Pages," and normally that's fine.
In this case, however, I'm posting some telephoto shots of dolphins and some of the pictures are cropped below 1024 on both height and width of the raw image, and so LR renders a JPEG that it upsamples and of course it looks terrible.
Is there a way say, "okay, LR Web module, 1024 pixels' width or height is fine for most of the pictures, but these two shouldn't be more than 400 pixels on either dimension?"
In case it matters, I'm running LR on a Vista 64 system, 3 GB RAM.
Even if you can't help, thanks for taking the time to look at the question!

Hi,
The slide duration in presenter is automatically adjusted according to the time of the audio inserted on that slide.
How are you inserting audio on slide ? Recording or inserting using presenter option ?
You cannot create a movie format like avi, mp4 etc
But you may publish the presenttaion in the swf format which will play in a browser or a swf player. To play in the broswer you just need to have Adobe Flash Player installed on your system. It will play like a movie in the broswer.
Let me know if you need some more help
Thanks,
Alpi Agarwal
Adobe Presenter Engineering Team

How to make entry for transit loss in the system

Hello to all,
I am having an issue with one subCon material.
Suppose,
Material A is the product required of 3000 MT Qty.
SubCon vendor have sent that qty, but there is a transit loss of 500 MT.
How to make entry for this transit loss in the system.
regards,
Anisha

correct me if i am wrong-
ur scenario is
for making material A ,
3000 MT of material B required.
but for producing A vendor uses 3500MT of B
solution : if this ia the case then u can overwrite the value of B at GRN from 3000MT to 3500MT.
OR
ur scenario is -
u require material A of 3000MT
vendor sends u 3000MT
but actualy u recieve 2500MT
and u have to pay for 3000MT as per bill
solution : if this is ur scenario then.
prerequisite-activate direct posting to G/L and material at MIRO
Path - SPRO->MM->LIV->activate direct posting to G/L and material at MIRO.
now procedure is -
step 1) do GR for 2500MT
step2) in LIV pay to vendor for 3000MT for that put 500 qty in material tab and the relavent amount.
in this way loss in transite will be book on inventory.
regards,
sujit

How to make a clipping mask in this particular case?

Okay, Just to begin I know how to make a clipping mask, but for the case that I'm going to present right now I just can't figure out what mistake I am doing (if any). However I am a beginner.
http://vector.tutsplus.com/tutorials/illustration/how-to-create-a-medieval-paper-scroll/
In the link to above tutorial on how to make a medieval scrol I'm stuck at step 25 and would be glad to anyone who helped.
As said in step 25 that expand the appearance of the scroll and select the two then clip the mask. In th above picture I have just selected the scroll to show how it looks.
Now as you can see in the image below I have expanded the appearance of the paper scroll. Then I selected the paper scrol and the yellowish green grunge background placed below it. And the moment I hit Ctrl+7 (in windows) or Command+7 (in Mac) to make a clipping mask the error that showed up has been highlighted.
One more thing, I have clipped masks before too in the same tutorial given above but I don't know what has gone wrong for me in this step.
Please help.
Signed,
Awais Rauf

Why would you want a clipping mask? I don’t see a reason for it.
However, for what you want I would use the Pathfinder panel to combine all the paths into one shape. First use the ungroup and release compound commands a few times each, to make sure you have nothing grouped. Then press the top left button in the Pathfinder p[panel. This should produce one closed path that just surrounds the scroll.

Merge to HDR Pro - how to make it work?

The 'Automate -> Merge to HDR' feature worked fine during the first few weeks of my Ps CS5 trial but now doesn't work. Photoshop gets through the Merge to HDR Pro dialog but throws the attached error when returning to Ps.
If Merge to HDR Pro is chosen on DNG images from Lightroom 2.7 or Bridge CS5, Photoshop again gets through the Merge to HDR Pro dialog but when creating the HDR image and returning to Ps seems to throw it away with no resulting error. Photoshop just stares blankly with no image open.
I experienced the same error with CS4 and was excited when the Merge to HDR Pro feature on my CS5 trial worked fine, yet with 5 days left in the trial the HDR feature now refuses to cooperate. It previously was working OK from the Automate menu, from Lr 2.7, and from Bridge. What exactly I did to upset Photohop is a mystery.
I've tried resetting preferences and removing all plugins and extenstions to no avail. Any ideas on how to make Merge to HDR Pro functional?

There has been a long and continuous thread regarding CS5 having problems when one tries to save images that have been combined in Merge to HDR Pro. I have exactly the same problem. I have been shooting 3 images bracketed -1, 0, +1 or -2, 0, +2. When I select 3 images in Bridge. Go to Tools>Ph otoshop>Merge to HDR Pro the computer does its work and produces an image of a combination of the 3. I can see the image, and in the Layers Panel I see 3 Layers plus one Layer that is entitled Merge to HDR Pro(layer is devoid of image. When I try to Save As Photoshop freezes up. I have 11 Screenshots to illustrate. Also Select 3 in BridgeI have tried many different sets of images. Screenshots:Select 3 images in Bridge CS5Go to Tools>Photoshop>Merge to HDR ProSave as 32 bit image; have tried 16 bit and 8 bit too- still freezes at endSave as BEF 32 bitSaving -Computer is Processing32 bit image saved on screenSave as bef to proper locationPutting in File TitleSelecting 1PHOTOSHOP FROZEN- anything I click on no responsePhotoshop Running but not responding- Frozen; Task Manager says all running here, but no responseHave to end process with task manager. Thanks, Sam

How to make screenshot/jpg/pdf of ENTIRE long Safari window (not just visible part)?

I want to get a "screenshot" (i.e. an image in any format -- PNG, JPG, PDF, whatever) of a looooooooong Safari window diplaying a Web page that entends far below the bottom of the visible screen area and has to be scrolled down to see all of it.
I know about the standard screenshot keyboard tricks in 10.6 -- Command-shift-4, Command-shift-4 then spacebar/click, Command-shift-3, etc. But not any of them allow the user to get a screen shot of the entirety of a long/deep window -- they only capture what is visible on the screen.
Also, another trick people often mention is to "print" (command-P) the Safari page, but instead of sending it to a printer choose "Save as PDF." Brilliant -- except that for some reason I've never been able to "print" a Safari page -- as soon as I hit the command-P keystrokes in Safari, I immediately get a spinning beachball that will only go a way with a force-quit of Safari. This has always been true on this computer (MacBook Pro) -- not sure if it's a common bug or if it's just an eccentricity of my particular machine. Either way, that option is off the table because "printing" is impossible with my Safari.
I also searched around for various third-party freeware applications, and despite a lot of grandiose promises, none of them actually was able to capture an entire window including portions not currently visible on the screen.
I did find a commercial application called SnapWeb that does have the capability to do exactly what I want -- but it doesn't produce usable images in demo mode and requires $$$ to unlock and work properly, something I'm currently unwilling to pay for a simple one-use gimmick that simply must be part of the OS already.
So my question is:
Is there any native way within the 10.6 OS that allows users to capture an entire long Safari window as an image file (not as a Web Archive, but as an image file composed of pixels), which includes the entirety of a Web page no matter how "long" it is, even if it extends far below the visible screen footprint?
And if there is no native way in 10.6, if there a freeware/shareware application/widget/plugin/whatever which does the same thing?
I already know about a commercial software that does it (SnapWeb), so I don't need more recommendations for paid apps. And I know that I can laboriously construct a JPEG by hand with Photoshop by taking a screenshot of the visible window, scrolling down a little, taking another screenshot, etc. etc., and then
"stitching" them together. Yeah, it's possible (and in fact is what I've done in the past), but it's a time-consuming hassle that shouldn't be necessary.
Help! I've wondered about how to do this for years, and have never yet found a satisfactory answer.

Woo-hoo!
After fiddling with Paparazzi! for another 40 minutes, I finally deciphered (through trial-and-error) how to maneuver through its awkward user-interface to an extent that I was finally able to make it "work" -- at least work sufficiently for my purposes. And lo and behold, it does indeed have the capacity to capture a screenshot of an entire long Web page, including the portion not visible on the screen. In fact my first attempt was to experiment with this very page of our thread on Apple "Discussions" about how to solve this problem -- and I got Paparazzi! to save it as a jpeg!! The whole thread, top to bottom, exactly as on the screen, not re-formatted for printing. The final file size was 985 pixels wide by 4,204 pixels long (1.2mb).
I have since experimented with a couple other pages and had success with them as well.
HOWEVER, I can't guarantee that Paparazzi! will work with every page on the Web, because I think one of the problems when I first attempted to use it was that the page I was trying to get a screenshot of contained a lot of Flash elements and other data-heavy widgets, and I think those messed up Paparazzi!'s memory or overwhelmed it or something. But perhaps such huge and problematic pages are rare enough to not be much of an issue using Paparazzi! under normal circumstances.
So, I'll consider this problem "solved," and give user "jsd2" a "This helped me" star, since even though I already had Paparazzi! he encouraged me to revisit it.
And for the record to help those who might stumble on this thread in the future seeking a solution to the same problem:
The freeware program to get is called "Paparazzi!" and is available directly on the developers site here:
http://derailer.org/paparazzi/
Also, note that the current version only works with 10.6.8 or later, but if you have a previous version of the Mac OS, the developer helpfully maintains an archive of older releases that work with older OS versions -- you can access the old (and new) versions here:
http://derailer.org/paparazzi/downloads
It's also available for free download on various popular third-party sites, like:
http://www.macupdate.com/app/mac/15966/paparazzi!
Be warned that Paparazzi! does not have a very intuitive user interface, nor a user manual, so be patient with it and you should be able to figure out how to make it work.
If you want another application that also does the trick and which has a simpler and better user experience, but you don't mind paying money to buy it, you can purchase and download "SnapWeb" on its developer's site here:
http://www.tribalmedia.com/bts/snapweb/snapweb.html
And if anybody seeing this in the future knows whether or not there is a native way to capture entire Web pages built in to 10.6, please post the info here. Thanks!

How to make beep by PC speaker in java

hello,everybody:
I know that can make pc speaker produce beep voice in c language through use ascII--007,but how to realize it in java application.Please help me,thank you.

Hi, try this
Toolkit.getDefaultToolkit().beep();this also works on some systems
System.out.print( '\u0007' );
System.out.print( '\007' );
System.out.print( (char)0x07 );hope this helps
AA

How to make a button to stop and run a for loop?

How to make a button to stop and run a for loop? and if it is stopped it shall start from where i t stopped.

Your VI has some very fundamental flaws.
The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
Thus the terminal of the start/stop button belongs inside the FOR loop.
Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
Once you solve (2), the x indicator will contain a random value whenever you "stop".
As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
Place e.g. a 500ms wait inside the FOR loop to solve this.
Don't place terminals of indicators on top of formula nodes.
Your formula does not produce any output, so really has no purpose.
Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
LabVIEW Champion . Do more with less code and in less time .

Transitioning WSRP producer registrations from development to production

Hi there,
we're currently struggling a bit with the notion of producer registrations vs. the need for separating our development environment from production.
Here's what we do:
1. We create a producer connection in JDeveloper, but using the development server's portlet deployment as WSDL endpoint
2. We then continue to create some pages, instantiating portlets from the newly created producer as we go along
3. We deploy that to our development environment. All is well!
4. We (at some time in our projects lifecycle) try to go ahead and deploy to production. For that, we'd like to change the URL of the producer connection while preserving all the pages we composed (at design time), so far.
5. First, we simply change the producer url in connections.xml before starting to predeploy. -> Error, since the ID of the registration handle included in our local MDS doesn't match anything that exists in the actual production environment.
6. Next, we try to predeploy/deploy the EAR file as is, then change the actual producer URL using WLST (setWSRPProducer, registerWSRPProducer, degisterWSRPProducer, etc) or the Fusion Enterprise Manager. -> Doesn't work either, since deregistration/registration invalidates all the existing portlet instance files we have in our original MDS/MAR file.
So here's my question: What are best practices you can recommend when working with WSRP producers and a (clean) separation between development, testing and production environment? Are design-time producer registrations/portlet instantiations even possible in such a context? Should we perhaps use the preference data migration tool for migrating consumer registrations from one environment to the other? Even when one of those environments is unstable (dev) and the other supposed to be stable (production)? Or should we (at the portlet-level) disable consumer registrations entirely? If yes: How to do this in WebCenter?
Help is deeply appreciated :-)!
Cheers,
Chris
Edited by: ckesselh on Nov 3, 2011 8:14 AM

Hi Chris,
You raise good questions that I would love to explore further as well and it would be great if you could let me know what deployment approach you have come up with. Some of this is covered under section http://docs.oracle.com/cd/E17904_01/webcenter.1111/e12405/wcadm_imp_exp.htm and http://docs.oracle.com/cd/E17904_01/core.1111/e10105/deployer_role.htm which I am sure you have already reviewed. I have a much simpler problem with getting a Null Exception Error every time that I simply try to register a WSRP Producer with the sample .Net service - have you ever tried that and have come across the same issue?
Thanks,
Michael.

Configuring Custom JavaScript/CSS and YUI in WSRP Producer Portlet

I am trying to find information on how to setup/configure WebCenter for WSRP Producer Portlets that have YUI and custom javascript/CSS. While we have gotten some of the YUI features and custom javascript/CSS to work, we find that some references are not loading such as custom CSS and images. This appears to be a result of the URL rewrite not occuring for some of these references. It appears that WebLogic Portal supports this capability and can be configured using a dependency file for such needs but I have been unable to find a equivalent for WebCenter.
Any help would be greatly appreciated.
Best Regards.
Carl

When you are providing javascript or css path,provide the absolute path.
like src="http://<server>:<port>/portlet context root/images/some.png".
In that way custom javascript/css will work.
Regards,
Hoque

Integrate OAS Portal with E1 - WSRP Producer

Hello,
I want to integrate OAS Portal with E1. I am following: "JD Edwards EnterpriseOne Tools Release 8.98 Portal Reference Guide for All Portals and Platforms" and I have a doubt about how to register a new WSRP producer for Oracle Portal Server.
I am working with:
- OAS Portal 10.1.4 (integrated with Windows Server 2003 SP1)
- JDE E1 8.12 Tools 8.98
- Each one are in a different physical machine.
I am not sure what is exactlly WSRP producer. In the manual, it says that it is: JDE E1 HTML Web Server.
When I amb in the second step to register the new WSRP (Provider Description (WSDL)) I have the following error:
"Internal Error *(WWC-00006)*
Unexpected error: *ORA-00932*: Inconsistent datatype waited an IN argument at position 2 that is an instance of an Oracle
type convertible to an instance of a user defined Java class has obtained an Oracle type that could not be converted to a java class *(WWC-35000)*"
In WSDL URL I have specified:
http://HOST_E1:8083/jde/wsdl/WSRPService.wsdl
And if it is acceded via web browser, the result is:
- <definitions targetNamespace="urn:oasis:names:tc:wsrp:v1:wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:bind="urn:oasis:names:tc:wsrp:v1:bind" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<import namespace="urn:oasis:names:tc:wsrp:v1:bind" location="local.wsdl" />
- <service name="WSRPService">
- <port name="WSRPBaseService" binding="bind:WSRP_v1_Markup_Binding_SOAP">
<soap:address location="http:///HOST_E1:8083/jde/WSRPBaseService" />
</port>
- <port name="WSRPServiceDescriptionService" binding="bind:WSRP_v1_ServiceDescription_Binding_SOAP">
<soap:address location="http:///HOST_E1:8083/jde/WSRPServiceDescriptionService" />
</port>
</service>
</definitions>
1) Is correct this result?
2) In which file can I find the port number that I need to register the WSRP?
I am not sure about this port, but it is the number port to enter to JDE's Web (http://HOST_E1:8083/jde/E1Menu.maf)
3) Is necessary to do any step before?
Thank you and regards

I have found the following manual:
"Oracle® Application Server Portal Developer's Guide 10g Release 2" - Configuring Your Application Server to Run JPS-Compliant Portlets (including Data Sources's Configuration).
I have followed the necessary steps, but when I tried to test it (Registering and Viewing Your Portlet's Section (create a WSRP Provider)), I have the same errorr:
Internal error WWC-00006
Unexpected error ORA-00932
WWC-35000
I have verified via web browser my WSRP Producer WSDL Page, and it is correct.
I have tested with different users (orcladmin, portal, etc), even I have included them in PORTAL_ADMINISTRATORS group. But it doesn't work...
Another thing I have tested is to apply 4640471 patch, although I am not sure it should be necessary, because in ReadMe file, it is only for Solaris Systems, and I am working with Windows Server 2003 SP1...
I am really desesperate with this error, do you have any idea to solve it?
Thank you and regards.
Edited by: Mónica on 28-jun-2010 3:44

How to make single full scan

Hi, ALL
I have this query like below and I see that it produced 3 <TABLE ACCESS FULL> for each Unioin, how to make it work with single Scan? It's simple table 2 colums, not indexes or PK, just for sample.
explain plan for
select count(*) from tt where amt between 0 and 100 union all
select       count(*) from tt where amt between 100 and 200 union all
select       count(*) from tt where amt >200
| Id | Operation           | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT    |      |     3 |    39 |     9 (67)| 00:00:01 |
|   1 | UNION-ALL          |      |       |       |            |          |
|   2 |   SORT AGGREGATE    |      |     1 |    13 |            |          |
|* 3 |    TABLE ACCESS FULL| TT   |     2 |    26 |     3   (0)| 00:00:01 |
|   4 |   SORT AGGREGATE    |      |     1 |    13 |            |          |
|* 5 |    TABLE ACCESS FULL| TT   |     3 |    39 |     3   (0)| 00:00:01 |
|   6 |   SORT AGGREGATE    |      |     1 |    13 |            |          |
|* 7 |    TABLE ACCESS FULL| TT   |     3 |    39 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   3 - filter("AMT">=0 AND "AMT"<=100)
   5 - filter("AMT">=100 AND "AMT"<=200)
   7 - filter("AMT">200)
Note
   - dynamic sampling used for this statement

SQL> explain plan for
2 select count(*) from emp where sal between 0 and 100 union all
3 select       count(*) from emp where sal between 100 and 200 union all
4 select       count(*) from emp where sal > 200
5 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 3840822464
| Id | Operation         | Name     | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |          |     3 |    12 |     3 (67)| 00:00:01 |
|   1 | UNION-ALL        |          |       |       |            |          |
|   2 |   SORT AGGREGATE |          |     1 |     4 |            |          |
|* 3 |    INDEX FULL SCAN| EMP_IDX3 |     1 |     4 |     1   (0)| 00:00:01 |
|   4 |   SORT AGGREGATE |          |     1 |     4 |            |          |
|* 5 |    INDEX FULL SCAN| EMP_IDX3 |     1 |     4 |     1   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|   6 |   SORT AGGREGATE |          |     1 |     4 |            |          |
|* 7 |    INDEX FULL SCAN| EMP_IDX3 |    14 |    56 |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   3 - access("SAL">=0 AND "SAL"<=100)
       filter("SAL"<=100 AND "SAL">=0)
   5 - access("SAL">=100 AND "SAL"<=200)
       filter("SAL"<=200 AND "SAL">=100)
PLAN_TABLE_OUTPUT
   7 - access("SAL">200)
       filter("SAL">200)
24 rows selected.
SQL> explain plan for
2 with t as (
3             select count(case when sal between 0 and 100 then 1 end) cnt1,
4                     count(case when sal between 100 and 200 then 1 end) cnt2,
5                     count(case when sal > 200 then 1 end) cnt3
6               from emp
7            )
8 select cnt1 from t union all
9 select cnt2 from t union all
10 select cnt3 from t
11 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 2586840053
| Id | Operation                  | Name                        | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT           |                             |     3 |    39 |     6 (67)| 00:00:01 |
|   1 | TEMP TABLE TRANSFORMATION |                             |       |       |            |          |
|   2 |   LOAD AS SELECT           |                             |       |       |            |          |
|   3 |    SORT AGGREGATE          |                             |     1 |     4 |            |          |
|   4 |     TABLE ACCESS FULL      | EMP                         |    14 |    56 |     3   (0)| 00:00:01 |
|   5 |   UNION-ALL                |                             |       |       |            |          |
PLAN_TABLE_OUTPUT
|   6 |    VIEW                    |                             |     1 |    13 |     2   (0)| 00:00:01 |
|   7 |     TABLE ACCESS FULL      | SYS_TEMP_0FD9D662A_D5091620 |     1 |     4 |     2   (0)| 00:00:01 |
|   8 |    VIEW                    |                             |     1 |    13 |     2   (0)| 00:00:01 |
|   9 |     TABLE ACCESS FULL      | SYS_TEMP_0FD9D662A_D5091620 |     1 |     4 |     2   (0)| 00:00:01 |
| 10 |    VIEW                    |                             |     1 |    13 |     2   (0)| 00:00:01 |
| 11 |     TABLE ACCESS FULL      | SYS_TEMP_0FD9D662A_D5091620 |     1 |     4 |     2   (0)| 00:00:01 |
18 rows selected.
SQL> SY.

How to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long. however this also failled. where did I go wrong, please?

how to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long. however this also failled. where did I go wrong, please?
the message sked me to alter the quality of the DVD as the content was too large for the quality sellected.
PLEASE HELP again,
THANK YOU VERY MUCH
MIchael

Check the Advanced ➙ Project Information menu option to make sure the playing time of the entire project, movie plus menu is below the 120 minute limit.
OT

How to make the sign in CS 5 I tried alt 0169 but does,n work, How to make the sign in CS 5 I tried alt 0169 but does,n work

Hoe een © teken maken in CS 5,1 ik heb alt + 0169 geprobeerd maar werkt niet.
How to make a © sign in CS 5 I tried alt+0169 but does"t work

The numeric keypad keys needs to be used to enter the Alt+0169 © ©©© on a laptop that often means turning on numlock and using the alt+and the keys being mapped for the numeric keypad. Usind the standart number keys does not work alt+0169 produces nothing....

How to make a Struts message null after used in JSP?

Hi,
In the context of Struts/JSP,
An action class might write error messages by
ActionError msg = new ActionError("msg.request.something");
ActionErrors msgs = new ActionErrors();
msgs.add(ActionErrors.GLOBAL_ERROR,msg);
saveErrors(request,msgs);
This message will produce a popup modal window by the following JSP code:
<logic:messagesPresent>
<html:messages id="error">

<script>javascript:alert('<%=error%>')</script>
</html:messages>
</logic:messagesPresent>
The problem is that this JSP page is shared by serveral actions: when another action invoke this page again, the previous error message will take effect again.
So my question is how to make message null after used once by its author.
Thx.
PY

msgs = null;

How to make a wsrp producer ?

Similar Messages

Maybe you are looking for