How to make A4 Flyer that folds in half from A3 Sized paper On Indesign

I need to makes a a4 flyer that flds in half from a3 .
Can someone send me through a step by step how to do this please
Thank you

If I am understanding what you are wanting to do, create an A3 size page, put any guidelines on it that you may need. Create two pages (assuming it is two-sided). Use one of the pages as the outside, one of the pages for the inside.
For the outside (the "cover"), typically the right-hand side is the side one sees first, the left-hand side being the back.
Communicate with the printer (the print service that is) about it being a folded job.
Mike

Similar Messages

  • How to make a cell that recognized the second from last?

    Two tables. First is data and second refers to the second to last column of the first which is always changing. The first table is a weekly table so it is constantly expanding. On that first table has a number that changes with it. I want the second table to show that changing number.
    mon
    tue
    wed
    1
    1
    2
    1
    2
    4
    ^ this is table one for week 1. my second table wants C3 to show on its table because it is a total.
    However, by next week i will have added a new week onto this one
    mon
    tue
    wed
    mon
    tue
    wed
    1
    1
    2
    2
    2
    1
    1
    2
    4
    6
    8
    9
    since i have added, table 2 will still be showing C3 since i, at the time, set it to show the, then current, total.
    Is there a way to make table two always refer to the the last column of the 3 row?

    Hi gaksdd,
    I am feeling bad. I am afraid that your spreadsheet will be ungainly and cranky and hard to update in the future. I want to say this much at least: Numbers tends to work best when the tables are longer than they are wide. I don't expect you to have this problem but while tables can have potentially thousands of lines they cannot have more than 256 columns. Many things will tend to work better if you orient your tables this way. As you are just beginning it makes sense to develop good habits and start thinking more like the program designers expect. It will pay off. If you ever decide to use iOS forms for data input they are designed to input data one row at a time. If you are inputing more than 1 number a day it would make sense to reorient your data table so the weeks run down the page.
    INDEX(range,row-index,column-index,area-index)
    You have specified a range.Then the first comma.
    row-index is where you specify a row. In my example it was "2" for the second row in the range. This is where you would use ROWS(), before the second comma.
    column-index is where I used COLUMN(). then the third comma.
    We don't need area-index.
    I get a certain pleasure in pushing this program in unusual ways and this certainly qualifies. It is not a best practice.
    When you have your formula working, compare it to
    =SUM(Table One::2:2)÷2 or the variation needed for your table. This way of working makes your report table more reliable.
    Simpler is more robust, less likely to bite you in the butt down the line.
    quinn

  • How 2 make a function that gets a value from DB without reloading?

    Hi every1,
    I'm facing this problem where I have to get a value (which always change) from database through a button function which is in Java scriplet.
    Now the scriplets (codes within <% and %>) contain calls to the database which get the value, but this is only done when the page loads. So everytime I neeed to get the latest value, I need to reload the code. Is there a way around this?
    Thanks!
    Regards,
    Venus

    Add a meta refresh header to let the page refresh itself at certain intervals.
    <meta http-equiv="refresh" content="10">This will refresh the current page every 10 seconds.
    By the way, Java code belongs in Java classes, not in JSP files. Avoid scriptlets as much as possible. In this case use a Servlet and a DAO.

  • How to make settings of root folder , while creating customize JSP Pages.

    Hi All,
    I am developing customized BI Beans Application.While the development ,I gose to compnent pallete and try to access BI Beans Objects which are on same workspace . But in the location tab it shows root foloder and only one object . I am unable to access another object which are belongs to same workspace .
    My question is how to make setting of root folder (there is no any option) and how to access other objects from same workspace
    Please guide me, if someone have any idea
    ViSHAL

    Can you describe the steps in detail?
    Which tag are you using from the component Palette?
    Also do you have multiple workspaces in your OLAP source DB?

  • Can someone tell me how to make the letters that look like fabric?

    Can someone tell me how to make the letters that look like fabric?

    pharrout wrote:
    Can someone tell me how to make the letters that look like fabric?
    It could be as simple as clipping an image of the fabric of your choice, to a text layer.
    In this example the Hessian texture was downloaded from Google images, and placed over a Type layer.  You then Alt (Opt) click the intersection of the Type and Hessian layer to clip them together.  This just means that only the shape of the underlying layer will show in the clipped layer.

  • How to make pics visible that was received through mobil/PC/Bluetooth?

    Does anyone know how to make pics visble, that has been recieved through emails/mobil/PC/Bluetooth to Mac or vs?
    I am able to see some pics, but some again I am not able to see in anyway, and these are standard pics taken from typically commercially available cameras, and some pics are too small to be useful. But than other they are that well to be used in many ways!
    Anyone faced similar issues?

    Hello @_goma,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
    To configure your desktop to enable the optical audio cable, I recommend following the steps below:
    Step 1. Click the Windows Key Button on your desktop
    Step 2. Type "Control Panel"
    Step 3. Select "Control Panel" in the top right-hand corner
    Step 4. Select Sound
    Step 5. Under the Playback tab, right-click the white area below the devices available
    Step 6. Select "Show Disabled" and "Show Disconnected Devices"
    Step 7. Connect your Optical Audio Cable
    Step 8. Select your Optical Audio Cable as the default device and click "Enable"
    Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How to make compressor give me 1280x720   h.264 from my 1440 x 1080 sequenc

    can someone please tell me how to make compressor give me 1280x720 h.264 from my 1440 x 1080 sequence, with compressor I load up my high defition h.264 but i cant see where i can chage the size, I can tab on the preset and change max bit rates and other stuff but not to make it 1280 x 720,
    Thanks for the help,
    Daz

    In Compressor 3's Settings window:
    Apple > Apple Devices > H.264 for Apple TV
    this is one of the presets that is supplied as standard and it is pre-configured for H.264 1280x720 output
    if you're building your preset from scratch then you can set the output frame size in the Dimensions area of the Geometry pane

  • How do i retrieve photos that have been deleted from my ipod touch if i have windows operating system?

    how do i retrieve photos that have been deleted from my ipod touch if i have windows operating system?

    Yest it will restore photos deleted from yur iOd probvide that the photos were taken before the the last synce/backyp was made.  Make syre yu have automatic syncing turned off (Itunes>Preference>Devices>Check the box that says prevent auto syncing when connected).  Otherwise when connected, a backup that reflects the deleted photos will be made and will replace the previous backup.

  • How can I use apps that I have purchased from Apps Store for Mac on my iPad2?

    how can I use apps that I have purchased from Apps Store for Mac on my iPad2?

    Thanks, varjak, it is too easy to fall into use of jargon assuming everyone understands what it means.
    One additional point in all of this, not all "iDevice" apps run on every "iDevice".  Some are customized for a specific device, or class of devices such as the iPod/iPhone with their smaller screen.  Others for just the iPads for their larger screens.  So the user needs to be sure they are getting an app that will work on their specific device.
    And to Phoneboone, you do need to purchase the app again if it is for a different class of equipment.  When you are looking at apps such as iWorks for the Mac and iWorks components for the iPad, the iPad versions are very inexpensive.  Pages is only $10 (US) which is really cheap for such a good word processor that reads and saves in the MS Word format.
    Anyway, search for what you need and just enjoy the convenience of so many options for apps.

  • How to call a class that extends a frame from a panel ?

    How to call a class that extends a frame from a panel ?
    I am trying to create an application say "Videoshow"
    Videoshow has a panel which in turn consists of 2 components : 1]a textarea( to show the contents of a page) and 2] a mediaclip(to show the video).
    Now I have an application "MediaApplication"(to show the videoclip) which extends Frame (Code from Java 2 Unleashed, Chap 21). I want to show this MediaApplication in Component 2 of the above panel. But when I do this, I only see the MediaApplication frame instead of the whole SlideShow.
    I want to do something likethis.
    VideoShow :
    |---------------------------------|-------------------|
    | |
    | (Comp 1) | (Comp 2)
    | TEXTAREA | Video Clip
    | |(MediaApp entends Frame)
    |---------------------------------|-------------------|
    What is the best way to achieve this ? Also which component can I use to show the videoclip ?

    im not familiar with the code you mention from Java 2 Unleashed, but your best bet is to read up on Swing a bit - so you get an idea of how Swing containers and components work - then im sure you'll find a solution to your problems. Then if you encounter any difficulties whilst your attempting to do that, post your code in the Swing forum and im sure someone will help you.

  • How to create a program that accepts 5 digits from the user between 0 and 9

    how to create a program that accepts 5 digits from the user between 0 and 9 then put them in ascending order using link-list method..

    You can use a scanner to get user input from the command line.
    import java.util.*;
    public class Test {
        private List<Integer> list;
        private Scanner in;
        public static void main (String... args) {
            new Test ();
        public Test () {
            list = new LinkedList<Integer> ();
            in = new Scanner (System.in);
            for (int i = 0; i < 5; i ++) {
                System.out.format ("Please enter a number (%d more): ", (5 - i));
                list.add (in.nextInt ());
            Collections.sort(list, new Comparator<Integer> () {
                public int compare (Integer i1, Integer i2) {
                    return i2 - i1;
            System.out.println (list);
    }

  • Hello-- I'am thinking off making an app to the iphone, but i'am not sure aboutsomething. the app should get some alarms from a specific phone number, and my question is, can i make an app that can receive message from a specific phone number ?

    Hello-- I'am thinking off making an app to the iphone, but i'am not sure aboutsomething. the app should get some alarms from a specific phone number, and my question is, can i make an app that can receive message from a specific phone number ?

    This needs to be asked at http://developer.apple.com/

  • HT1660 how can i view files that i buck up from my old device to i tunes

    how  can you view file that i buck up from old divice to itunes

    Reset and Erase before selling
    Settings>General>Reset>Erase all Content and Settings

  • How can i delete album that i load it from itunes on my pc

    how can i delete album that i load it from itunes on my pc.....please help me,,,please Apple

    You need to connect your phone to your computer and de-select that album in your sync settings in iTunes.
    Best of luck.

  • How to make a Shared mailbox folder appear on everyones mailbox automatically

    Hello, I need to find a way for a Shared mailbox
    folder to appear in everyone’s mailbox automatically – preferably in their favorites. We currently have a Public Folder where everyone in the company can drag or email any suspicious, fishing, etc.
    emails. Unfortunately that is not good enough for our company's upper management. They
    wants me to find a way to add a folder on everyone’s mailbox so they can easily find it under their favorites and drag any questionable messages to it.
    I created a Shared mailbox for this purpose and a folder and I gave everyone access to it. Now
    I’m not sure how to make this folder appear automatically in everyone’s mailbox favorites. If there is a way to accomplish this I would appreciate any suggestions.  I wonder if there is a
    powershellcmdlet that can help me do this. Any assistance will be greatly appreciated. For now we are running on a mix environment Exchange 2010/2013, but pretty soon it will be 2013 only. Thanks in advance for your assistance.
     

    I wouldn't recommend this method, trust me this might become mess if doesn't go to right direction. People might use this shared mailbox for their
    own use. Best practice is to create a shared mailbox with some sensible name like [email protected] or
    something like that and then share it on the announcement board or send an announcement mail to all users and ask them to forward their spam, suspicious, fishing mails to this address.

Maybe you are looking for