How to make Account managers owners of Accounts through Account teams

Hi,
I've got a question regarding loading data. In my organisation only the admin can load new accounts. Account managers however are responsible of the accounts after the initial load. I want to use the account team funtionality (and not add an 'owner field' to the Account layout). But if I do that, it seems that I can only report (reports which deal with account/other relationships) on the intitial loader as owner and not on the account team.
So my question is:
Is it possible to remove the initial loader from the Account Team and make someone else main responisble, so I can report on them?
I hope you guys can help me with my request. We're going live with our system in 2 days so all help will be appreciated!
Kind regards
Vincent

Hee guys,
I'm kinda still stuck with the previous question. What do you do when Account managers (owners of accounts) change? I can't seem to remove current owners of accounts but can only add other Account managers to my Accounts.
Does anyone how I can remove and change current owners?
I hope you can help me out!
Kind regards
Vincent
Edited by: Vincent001 on 8-jul-2009 2:10

Similar Messages

HT1937 how to make iphone to iphone video call through sim card

how to make iphone to iphone video call through sim card??

use facetime to video call or any other app for that. you should have an cellular data connection or wifi to use this

How to make pics visible that was received through mobil/PC/Bluetooth?

Does anyone know how to make pics visble, that has been recieved through emails/mobil/PC/Bluetooth to Mac or vs?
I am able to see some pics, but some again I am not able to see in anyway, and these are standard pics taken from typically commercially available cameras, and some pics are too small to be useful. But than other they are that well to be used in many ways!
Anyone faced similar issues?

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How to make the Shipping address field on an Account as a required field?

Hi,
The requirement is that there has to be a shipping address specified for each Account that is being created.
I tried to set the 'shipping' address field to 'required' in Account field setup, but the required checkbox is disabled, neither can I do it from Account Page layouts since there also its the same case.
Does anyone know if its possible to do this and how?
Regards,
Ani.

Have you tried to add validation to the AccountName field
[<PrimaryShipToStreetAddress>] IS NOT NULL - will test to see if there is a value in the Shipping Address 1 field

How to make the Reference field in the in Accounting Tab a required field.

Hi,
Can i make the REference field in the Accounting tab required. I want to enter contract number from RE in that field.
Thank you.
Rachelle

Hi,
Goto t.code OVA2 select A-sales header and then click on procedures in the left--> select the procedure in which you want to incolude this field and new entries the table name is VBAK and field is XBLNR for the reference field in the accouting tab and accordingly assign the status 01 or 02 as per your requirement.
Then you need to assign the incompletion procedure to the sales document type in VOV8.
Regards,
Gopal.

How to make a combined playlist from different iTunes accounts?

I want to make a playlist of music for a party using music from my husbands Mac and music from my Mac. We both have our own iTunes accounts on our own computers. We also have iPods and a portable hard disc. What is the easiest way to to do this so we can put the playlist on shuffle and let it play continuously during the party?

Hi ,Banerjee.
Asuume that you Cube Structures like below..
Cube -1 : Clime No, Cliime Name, Location, Amount1, Amount2.
Cube -2 : Clime No, Plant, Material, Location, Amount3, Amount4.
In your Multiprovider you need to select the Charecteristics "Clime No" , and "Location" ,becasue it is common in both Cubes
and In Keyfigure : You can select all or only one or only two or one from Cube -1 and other from Cube - 2 it doesn't matter.
In this case it will disply in single line, but in your case I hope the charecteristics which you are selected in Multiprovider in Identification is wrong, if you don't select common Charecteristics, you won't get the report in single line.
For reference you can see the following BLOG which will explain exactly your problem and Solution.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID0672843250DB01550372956869897428End?blog=/pub/wlg/4478
Thanks
Reddy

How to make BEX Customer Exit Variable inactive through Customer Exit Code

Hi,
I had created two variables VAR1 and VAR2 as Customer Exit variables
If VAR1 is entered then it should automatically make the VAR2 as NO Entry Variable.
vice versa also required.
can u help me with any code in CMOD so that we can make it inactive through Customer Exit Code.
Thanks in Advance.
Sunil.

What i want is not commenting the code
I want to make the BEX Variable as inactive by using the Customer Exit Code
EX : If value in VAR1 is entered then VAR2 should become automatically inactive.
If value in VAR2 is entered then VAR1 should become automatically inactive.
how can this be done
Thanks in advance.
Sunil

How to make a check box non-updatable through personalization

Hi All,
I have a requirement where I need to make check box read only in a case when user select some values from the drop down list box. Is it possible through personalization?
For example if there is a list box which contains 5 values and for three valuse one check box needs to be make as read only and where as for remaining it can be checked/un-checked.
Please let me know if this can be acheived through personalization.
Thanks,
Sandeep

If there is some event (e.g. fire partial action) present on selection of any value the drop down, then you can achive this using java script.
Create a raw text item and in the text property put java script to handle this case.
For sample java script code refer
How to set particular segment value of key flex field in Controller
-Anand

How to make a video stop in flash through an external button

Hi everyone!
I have a little problem: I made a flash site with its
different sections, the first of which has a movie clip which is a
"VideoPlaylist". So inside this movie clip I have the player and
the videos sequenced one after the other in a TileList component.
The problem is:
When I go to a different page, the video in the first page
continues to play and so you can still hear the sound, AND WHICH IS
WORSE, when you click the button to return to the first page, the
video starts again with the sound of the previous time still
rolling.
The solution would be, I suppose, when clicking to any of the
buttons that link to another section of the flash document, add
some action script to make the video stop (having in mind that the
video player is inside a movie clip).
I don't know action script, just the navigation basics
necessary for the sections. I did the videoplaylist following this
tutorial:
http://www.adobe.com/devnet/flash/articles/video_playlist.html
Can anyone help me, please!!

You better ask in the Flash forum; this is the Flash Player forum.

HT201493 How can I add my daughter to Find my friends when we have the same itunes account and that's how they make us log in?

How can I add my daughter to Find my friends when we have the same itunes account and that's how they make us log in?

1) You asked "Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?" Yes, you have to connect the iPod to that computer and go to the Photos pane for the iPod in iTunes and uncheck sync photos and the click on synce/apply. In the future do not check sync photos.
iOS and iPod: Syncing photos using iTunes
2)
Create a NEW account for using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Then on the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
- Settings>iCloud and sign out and sign in with hers
Contnue to use the commpn ID/account for Settings>iTunes and App stores.

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.

How to make On Account Payment

Hi all,
How to make On Account Payment.
What is the difference between On Account Payment and Down Payment
Thanks

Hi Siva,
Normall on account payment is a payment which is not against any invoice/bill.
In SAP, we take such scenarios throught the down payment cycle. Downpayment is nothing but advance issued to a vendor which is not against any invoice/bill.
So we can say that on account payment in SAP is handled through Down payment (advance).
Tcodes wrt vendors:
F-47 - Request
F-48 - Down Payment
Tcodes wrt customers:
F-37 - Request
F-29 - Down Payment
Regards,
Kiran

How to make Reply (all), to an email I sent, to be sent from same account as the original email?

I have a number of Email accounts configured, all of them as pop mail. And, they are all configured to use the same Inbox and Send folders, Thrashbin etc. They are all correctly configured with the appropriate Sender and Reply to-address.
My problem, has started occuring, I think, after I exchanged my default and some of my email accounts.
Sometimes I need to reuse a message that I have sent, to fill in some details, or whatever.
Typically I open an Email from the Sent folder, remove my own email from the distribution list, add some more text
and resend the message to the original recipients.
What I want, is for the new message to be sent from the same sender address as the original email.
But, since I changed my default account, the new email created by opening an email from the Sent folder
and clicking Reply or Reply all, now gets a different Sender and Reply to - address.
And this means I have to remember to edit the Sender address.
I seem to get this problem regardless of whether I do Forward, Reply or Reply all, to create a new Email from the old one I sent.
This is really a nuisance since I keep forgetting to do this, and it takes extra time and effort for something that used to be quick and easy.
How can I make Thunderbird include the correct Sender address, (the one that I sent the original email from) when doing this, without my having to change it manually each time?
The address Thunderbird chooses is not even my Default email address, but the first account that appears after the Default account in the list of accounts, at least that is what it seems like. I have tried to find a way to reorder the accounts, but I have not been able to find that.
Is there a way to reorder the accounts?
Would it help if I recreated the accounts so the one I use as default becomes the oldest one? But that, would help only for the default account, and the other accounts would still have the same problem, I assume?
I could live with this, since the default account is the default account for a reason.
Would it help, if I separated the different accounts, into different folders?
Or is there a setting to configure how Thunderbird does this, or even have it ask every time I create a new email from the Sent folder?
Each one of the accounts, is configured with the appropriate smtp server settings, (probably irrelevant for this problem).

Good suggestion. It gets rid of the "mailto:", but I have to remove the space after dragging the clip into the user name box. Interestingly, I can open the clip with TextWrangler, remove the space, and save it as a clip. However, the clip, as a clip, still has the space! When I open it again in TextWrangler, the space is gone, but still appears when I drag the clip or open it in the Finder. So not quite a cigar. But definitely useful.
So the question remains, where is a clip's data stored? Is it editable? If so, how? If not, why not?

How to make the hard disk visible in a new admin account?

I created a new admin account, in order (hopefully) to solve some problems that I've been having with SPSS21 for Mac. But when I log on as a new admin account, my hard disk no longer appears on the desktop. It (and all the folders and files in it) are still accessible by clicking on the hard disk in the path bar in a folder, but it's annoying not to have the icon on the hard disk. I don't know why the icon for the hard disk does not appear on the desktop. Does anyone know why, and how to make it appear? Thanks.

Oh, my god! I'm so embarrassed that I couldn't figure this out myself, after being a devoted Mac user for three decades! It's so obvious! Thank you so much!

How to make the GL account discription possible in FAGLL03 line item display?

Dear Experts,
    Could you tell me how to make the GL account discription possible in FAGLL03 line item display?
    I checked the layout, there is no account discription.
    How should I do?
Thanks!
Xinling Zhang

Hi
One you execute FAGLL03, go to Settings>Layout>Current Header Rows
You can add some predefine characteristics here.
I am not sure why the hyperlink is not working at your end. But you can search the SDN for special fields in FAGLL03 and you can get lot of posts for this document.
Regards
Sanil Bhandari

How to make Account managers owners of Accounts through Account teams

Similar Messages

Maybe you are looking for