How to make accounts display only via authorizations?

Has anyone setup CRM 2007 to get the account page to be display only? We don't want to allow certain users to manage accounts directly in CRM and would like to lock this down via authorization objects. We can't seem to figure out what authorization objects are needed to lock it down appropriately. Thanks in advance.

Hi James,
We've had a similar requirement. We used sap note 1260695.
Using this BAdI you can customize that depending on the BP role, some areas (e.g. marketing attributes) are
editable, and others (e.g. address data) are only displayed.
As an alternative, you can use note:
Note 1259940 - Authority check for accounts depending on roles
Hope this helps.
Regards,
Wim Olieman

Similar Messages

  • Nokia 5610 - how to make calls ring only on headph...

    Nokia 5610 - how to make calls ring only on headphone and not on phone???
    Could someone help me out please??? I tried everything... Nothing works!!!

    Surely if you put the phone on silent and connect the headphone? That works on mine.
    Chris
    6230i (the last bug-free Nokia?)
    Vodafone UK contract since 1992

  • How to make DFF Read Only ..

    Dear Friends,
    I have 3 segments in the Additional Personal Details DFF in HRMS. I want to make only the 2nd segment read-only not all the segments.How can we achieve this can any one pls let me know about this ...
    with regards
    Swpana

    Hi,
    Review the following documents and see if it helps.
    Note: 438215.1 - How To Make DFF Segments Read Only Using OAF Personalise
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=438215.1
    Note: 750679.1 - How To Make Only Some Of The Segments Of A Descriptive Flexfield Read Only On OA Framework
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=750679.1
    Note: 149452.1 - How do you make a descriptive flexfield display only?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=149452.1
    Regards,
    Hussein

  • ME22N - Make fields display only.

    Hi gurus,
    I have the following requirement I don`t know how to solve so well...
    We´ve created a new purchase order type and we need a little special behaviour for it.
    At creation (ME21N) all fields must be ready for input, in the same way that the other PO types.
    However, in modification (ME22N) we need some fields unavaible for input, just display.
    This fields are: Payment Terms (At header level) and Delivery Date (At Position level).
    I've trying some user-exits, but I havent found the way to implement this behaviour.
    Because of that, I`ve trying to let the fields available for input in ME22N and check values at save, showing a message in case of changes. Could anybody recommend me which user-exit use for this verifications?
    Once again, a lot of thanks!

    Hi Ole,
    Did you tried screen variants.Please check this lik want to make few fields as display only in ME21N Check this and tell if need more hlep in this.
    Regards,
    Madhu.

  • How to make F-02 only can "park" , not "post" .

    Use F-02 to key FI document , how to make it only can "park" , not "post" .
    I  try to use "PFCG" to find whether any "Authorization object"  to control it ,but i didn't find.
    anyone can help me ? Thank you !
    http://file.itpub.net/forum/201112/07/1518204gdl7ylj0pz1117m.jpg

    Hi:
        Authorization object F_BKPF_BES is used to detain this. If you revoke activity 01 out against a particular GL Authorization group as assigned in F_BKPF_BES , user would not be able to post the transaction. He will only be able to park ..However if you want to make it t code specific then please make use of screen variant and disable the post button in F-02.....
    Regards

  • Make fields 'Display only'

    Hi
    I have default u2018dep key u2018  &  u2018useful life u2018 in the system. Now I need to make these 2 fields 'display only' in master data.  How can I do it?
    Thanks
    Ava

    Hi
    In AO21 you may not have 'Display' option, but you remove the check under 'Mn No' for these two fields. then they would be only in display at master level. Since we tell the system that maintenance would only be at asset class level
    Thank You,

  • HOW DO MAKE ACCOUNT ICLOUD IN PC

    How to make an account on icloud?
    why my email account is not valid ...?
    according to apple rules, must be shopping at the apple store ...
    but has been spending too, can not also .....?
    I use windows 7 for use icloud, because I am very interested in this one ...
    ask for help .... thank you!!

    You are getting this message because you are attempting to create an iCloud account on a PC.  You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher.  After creating your account on one of these devices you will then be able to sign into the account on your PC.

  • OA Framework,how to make field Read-Only which is used inside Switch case

    Hi all,
    Using Personalization in OA Framework, when I am trying to make field read only, which is inside Swich statement ,then that field get automatically hidden.but my purpose is to make that field read-only not hide.
    My field name is Proposed Annual Increase Amount .
    The Personalization swtich case lookslike this :-
    Field Name Shown
    Switcher: Proposed Annual Increase Amount Yes
    case_name_HrPRateAnnTotInputSs
    Message Text Input: New Annual Amount Yes
    case_name_HrPRateAnnInputSs
    Message Text Input: Annual Pay Rate Yes
    case_name_HrPRateCurrAnnSalSs
    Message Styled Text: Pay Rate
    Regards,
    Mxj2930

    Can you be a bit clear on your requirement. If you have a switcher to display a field based on some condition, the other fields will not get displayed. I did not get as to what you mean by "my purpose is to make that field read-only not hide.".
    Are you talking about the case, when the "New Annual Amount" (or) "Annual Pay Rate" fields are displayed conditionally, you want them to be read-only and not editable. If this is the case, set the read-only property of these fields to true.

  • SRM 7 Header Delivery Tab-- how to make fields read only

    Hi Experts,
    We are upgrading from SRM 4 to SRM 7.
    In SRM 7
    Create Shopping Cart--> In General Data Click the link Set_Values --> Go To Delivery Address/Performance Location tab
    All the fields here are input ready, how can we make these read only?
    Thanks a ton
    Anubhav

    Please I need help too on this :
    When I try to create a SC I get the default address as below which was the og unit address :
    It is picking the address from the Org unit :
    Now If I check the user attributes That I have now added address number data should have been populated .   The attributes address are also seen correctly below in the attributes section below :
    The attributes address are also seen correctly below in the attributes section below :
    However when I create a SC 1001000515 created in test it has Delivery address as blank stored :
    Please can soe  one guide me is this a bug ?

  • How to make fields Read only on all tabs in one go with the help of feeder classes in SAP EHS?

    I have a requirement where once we press SAVE button i have to make all the fields read only in tabs highlighted below.Which is the best method to do it.?
    There are number of fields in all these tabs and we want to make them read only on particular Action event.How to do it?
    Thanks,
    Vimal

    Hi Vimal,
    As I understood you reformulate this question at this page. I will try to help you there.
    Kind regards, Aliaksandr.

  • How to make the display of custom column names in UWL(not bother abt values

    Hi all
    i want to make the display of custom column names in UWL ( for example GP)
    i dont want or not looking about values for those custom columns . i know that thru custom connector we can achieve to retrieve the values for those custom columns. but currently i am looking only just to display the custom column names( for example GP custom column names, just i want to display the name of the columns ) in UWL .
    Thanks
    Sunil

    Hello Prashant,
    You can add the control to your custom pagelayout, the following article has an example:
    http://spandps.com/2012/02/22/showing-the-audience-target-field-in-an-editmodepanel-sharepoint-sp2010-in-projectserver-ps2010/
    Btw, the SPFieldTargetToControl has a required property:
    http://msdn.microsoft.com/en-us/library/microsoft.office.server.webcontrols.fieldtypes.spfieldtargettocontrol.required(v=office.14).aspx
    - Dennis | Netherlands | Blog |
    Twitter

  • The window displaying bookmarks is too large (suddenly happened with the new version). I can't figure out how to make the display smaller. Zooming out does not work on the bookmark menu display.

    I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
    The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
    Thanks, Sara

    It seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
    Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog.

  • How to make my display be the main view with my mac Book Pro

    How to set up my external display automatically work as the main display when plugged into my MacBook Pro. I had it set up to work this way on my old MBP but I got a new MBP with Mountian Lion and the Display set up seen different and I can figure out how to make my Apple HD display (about 3 years old) be the main display when I turn on my MBP. Mirror is off when I look at
    System pref’s – Display – Arrangement I just get to pick which display is left and right. I cant remember how it was set up on my old MBP. Mirroring does me no good. Any help will do!!!
    Thanks Brad

    Drag the menu bar in the picture to the picture of the other display.

  • How to make files read only

    I want to make files read only.  Any workaround is welcomed.

    t quinn wrote:
    ElMagoElGato,
    I am glad to give some help but I am still confused because we are having different experiences. I have been able to lock Tables on my mac and have that lock respected in iOS for a long while now. Easy to unlock, impossible to relock.  With the most recent upgrade I can lock tables after tapping the upper left dot to select the whole table and going to "arrange" in the paintbrush.
    When you say worksheet are you meaning the entire file? When you say file lock are you meaning password protection? You can see I am confused.
    quinn
    Based on what ElMagoElGato has described, password protecting would be of no value to him. Once the file is accessed, it is in edit mode. Unless I'm really missing something.
    Files I have imported from Mac iworks apps with elements locked stay locked for me in iOS. Not sure what the problem is.

  • How to make JTextArea read only

    I want to make JTextArea read only so that you can only append text at design time and not at run time and so the user can not delete text in the text area.

    You can use the setEditable(boolean) method. I think that it's the best way.
    Sebastien

Maybe you are looking for

  • Is it possible to implement a truncation of text (a "more/less") function for paragraphs in PDFs?

    I work at a center for public service and we're trying to make our service handbook more user friendly. However, we're not experts when it comes to using Adobe Acrobat X Pro. Instead of having to scroll through the many pages of the handbook, we woul

  • Pass multiple rows from sp to calling prog

    I have a stored procedure using cursor to get multiple rows from the db, how can I pass these rows to the calling prog? Is the out variable returns the last row only? This is what I did: Create or replace procedure mysp ( var1 in number, var2 OUT num

  • Inbound deliveries and Shipment

    Hi How does one change the quantity on an inbound delivery after the shipmwnt was created. Is this possible. Is there any other means of reducing the quantiy on the confirmations tab of a purchase order. Vishnu

  • SAP double invoice checking

    Dear Forum,          Since in for FI documents will check double invoice when we post invoice with the same           - Company code          - Vendor          - Currency          - Document date          - Reference number          But our client wo

  • Safari 8 Cuts off the top of every web page

    Ok, so I'm looking for a solution or I want to know if other people are having the same problem so hopefully apple will fix it. As my title says, Safari 8 in Mac OS X Yosemite is cutting off the top of every web page while in full screen. Not just a