How to make ADF Business Component Connection which is using XATransaction?
Hi all,
I'm using ORACLE 10.1.3 ADF business component, how to set this component using XA transaction? Is that possible to use xa transaction manually from application module?
thanks
I believe you mean to ask whether ADF BC uses XA Transaction.
You can use a JDBC datasource based on XA Transaction for ADF BC. You might find this link useful for an overview: [XA Data Source Interface and Oracle Implementation|http://download-uk.oracle.com/docs/cd/B10501_01/java.920/a96654/xadistra.htm#1058741]
What do you mean by "+Is that possible to use xa transaction manually from application module?+" - Do you mean exposing the transaction of ADF BC outside its AM..? If so, I'm afraid that its not supported.
Thanks,
~Krithika
Similar Messages
-
11g ADF Business Component Browser + ADF BC security
Hi gang
I was hoping somebody could help me out with the ADF BC security features as outlined section 28.4.3 of the Fusion Developer's Guide for JDev 11g.
1) I note once you've defined a Policy Store via the ADF Security wizard, each time you run the ADF Business Component Browser a login dialog then shows requiring a user to be authenticated. Is there anyway to turn this off for the ADF BC model project for testing purposes without removing the whole Policy Store set of files?
2) The EO + EO attributes allow the role "unauthenticated-role" as a permission, documented online as:
"Select when you want to grant access privileges to unauthenticated users. All users, including unauthenticated users, for example, those *not*required* to log on to the application, are automatically considered by Oracle Platform Security to be a member of the anonymous-role."
(Note my emphasis in the quote)
Given this, once the ADF Security is enabled, the login dialog always appear for the ADF Business Component Browser. How do you login in an unauthenticated fashion to test an unauthenticated user's privileges against an authenticated privileges?
Hope you can help with thanks,
CM.Chris,
you should be able to switch it on/off by setting
authorizationEnforce="false"
authenticationRequire="false"/>
in the .adf\META-INF\adf-config.xml file
you can edit this file from within JDeveloper
Frank -
Error while adding ADF Business Component
Hi All,
I am using JDev 11.1.1.3 and trying to create a new Application.
Under the Model Project of this Application when I am trying to add Business component I am getting following error:
" *Wizard Open Error*
*Illegal name. It is either a reserved word or an object of a given name already exists within the project.*
*com.java.DemoApp.Model*
*Exception: oracle.jbo.dt.objects.JboException* "
Steps I followed:
New Application --> Fusion Web Application (ADF) --> Gave App name and hit Finish Button.
Model and View Controller Projects got created.
Now when I am trying to add ADF Business Component I am Getting above error.
Please HelpHi John ,
Please find details and steps below:
1. Open Jdev
2. Click New Application
3. Create Fusion Web Application (ADF)
wizard will come up
Details entered:
Application Name: DemoApp
Directory: D:\Jdev\mywork\DemoApp
Application Package Prefix com.java.Demo
4. Hit Next Button
Project 1Name come (Step 2 of 5)
Project Name Model (Default Project Name)
Directory D:\Jdev\mywork\DemoApp\Model (Automatically Populated)
No changes done
5. Hit Next Button
Project 1 Java Settings come (Step 3 of 5)
Below values automatically populated
Default package com.java.Demo.model
Java Source Path D:\Jdev\mywork\DemoApp\Model\src
Output Directory D:\Jdev\mywork\DemoApp\Model\classes
No changes done
6. Hit Next button
Project 1Name come (Step 4 of 5)
Project Name ViewController (Default Project Name)
Directory D:\Jdev\mywork\DemoApp\ViewController (Automatically Populated)
No changes done
7. Hit Next Button
Project 1 Java Settings come (Step 4 of 5)
Below values automatically populated
Default package com.java.Demo.view
Java Source Path D:\Jdev\mywork\DemoApp\ViewController\src
Output Directory D:\Jdev\mywork\DemoApp\ViewController\classes
No changes done
8. Click Finish Button
9. Select Model Project under Application Navigator
10. Right Click and select New --> ADF Business Component --> Application Module --> Ok
Error Thrown..
Please let me know if more details required
Thanks and Regards
Manav Ratra -
How to make adf security?
Dear all
How to make adf security?
I am new adf security.
I'm facing security issue. Now i need to secure me application (User, Group, Role etc...)
Oracle recommend me use WebLogic internal LDAP or OID. How to manage User, Group, Role deploy after?
Thanks LhagvaHi,
once you deployed an application, users and roles are no longer in the domain of ADF Security. So the administration is
WLS console - if users and groups are in the WLS LDAP
Identity Management - if users and roles are in OID, RDBMA, Active Directory etc.
Enterprise Managers - to manage application roles and granting permissions or application roles to enterprise groups
Frank -
ADF Business Component problem
Hello,
I am trying to Setting Up ADF Business Component Data Sources, pass all steps. Deployed oracle.bi.integration.adf.ear on WLS, added OBIEEBroker proggect to an application and so on. But when I deploy my application I am getting exception.
[08:45:51 AM] weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false], [Extension-Name: oracle.bi.integration.adf, Specification-Version: 11.1.1.2, exact-match: false], [Extension-Name: oracle.applcore.model, Specification-Version: 11.1.1, exact-match: false].
I have Oracle Business Intelligence 11.1.1.5.0, WebLogic Server Version: 10.3.5.0 and Studio Edition Version 11.1.1.5.0
Thanks,
SNikiforovCheck this Doc ID 947921.1
If helps pls mark -
How to make S-Curve for Primavear P6 by using BI publisher?
Hi,
Anyone knows how to make S-Curve for Primavear P6 by using BI publisher? I can display colunm such as planned unit, but not cumulative value. So I can't plot S-curve.
Thanks
Wang Xin
Edited by: 957906 on 09-Sep-2012 03:26The problem with the datagridview is that it can only show one table.
For more tables 3th party datagrid's are better.
Although you can start with using the old datagrid. Despite what is written on MSDN is it a complete different control then the datagridview. You can add in to your toolbox by right clicking on it and then add it.
The datasource of a DataGrid can be a complete dataset which is showed with all its relations.
Success
Cor -
How many types of ports are there which we use for data transfe in ale/idoc
friends let me know how many types of ports are there which we use for transfering
data in ale/idocs?Hello,
you can use file port,trnasactional RFC port.FI you are using IDOC-XML conversion combination,then you can XML port also.
Thanks -
How to make the dblink and what is the use of this
plz any body tell me "how to make the dblink and what is the use of this"
sujitDo you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed. -
How to get list of applied patches which applied using admrgpch
How to get list of applied patches which applied using admrgpch
You can't really get the individual patch IDs from a merged patch, unless you have the log file from the admrgpch run available.
You can, however, get the list of bugs fixed by a merged patch, and those bug numbers sometimes, but not always, correspond to a patch ID. Keep in mind, though, that individual patches often contain entries for multiple bug numbers.
Here's a query that I use to look at the contents of merged patches. It works best if the merged patches have been given unique names, instead of the default name 'merged' from admrgpch. If you run it and see that everything belongs to patch name 'merged,' you might want to change the selected column to ap.applied_patch_id instead of ap.patch_name.
select ap.patch_name
, ad.orig_patch_name
, ad.driver_file_name
, ad.merged_driver_flag
, ad.merge_date
, bug.bug_number
, cp.patch_abstract
from ad_applied_patches ap
join ad_patch_drivers ad using (applied_patch_id)
join ad_comprising_patches cp using (patch_driver_id)
join ad_bugs bug using (bug_id)
order by applied_patch_id;
Regards,
John P.
http://only4left.jpiwowar.com -
How can we find out the disk which is used for a mount point
How can we find out the disk which is used for a mount point?
one of our mount point(/u03/oracle/prod) was using high I/O and this was causing slowness in the server.
I can see a disk operation error in errpt at the same time as below. Wanted to check whether the mount point /u03/oracle/prod is using the disk hdisk31
$errpt|more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
DXB78877 1125032114 T H hdisk31 DISK OPERATION ERROR
OS version:AIX 6.1
DB:11.2.0.2this is the output for cat /etc/filesystem
/u02:
dev = /dev/fslv00
vfs = jfs2
log = /dev/loglv00
mount = true
options = rw
account = false
/u01:
dev = /dev/fslv01
vfs = jfs2
log = /dev/loglv00
mount = true
options = rw
account = false -
Programmatic ADF Business Component Work
Is there any documentation on advanced usages of ADF Business Components at the programmatic level? Oracle supplies a lot of documentation (i.e ADF Developer's Guide for Forms/4GL Developers) regarding the programmatic use of business components at the individual component level (i.e. a single entity object, view object, etc). But I cannot seem to locate any good resources for aiding in the programmatic use and development of already defined business components. I have gone through Part II "Building Your Business Services" and Part IV "Advanced Topics" of the Dev Guide trying to develop an understanding, but I find there is just too much content to sift through to collate the information that I think I need (if it is even present in the Dev Guides to begin with).
I am at the point where I know how to define, customize and extend my business components. My problem is now that I need to USE the business components to create methods and processes as required by my project. To be specific, I essentially have to write a process that uses a specific ViewObject and the ViewObjects linked to it (through ViewLinks) to redefine the parent's PK, copy it and it's originally associated child rowsProgrammatic manipulation of components are covered in:
5.6 Working Programmatically with View Object Query Results
6.8 Working Programmatically with Entity Objects and Associations
7.8 Working Programmatically with Entity-Based View Objects
The application module class has generated getter methods to access any view object intstance in the data model.
See section "8.3.2 What Happens When You Generate a Custom Class for an Application Module"
View object rows have view link attributes you can use to access child collections:
See section "5.10.4.2 How to Access a Detail Collection Using the View Link Accessor" -
Error JBO-33003 ADF Business component as an EJB remote
Hi,
I need to deploy an ADF application (model in business component and view in ADF Faces) in a multi-tier architecture. I deployed the MODEL project (bc4j) in an OAS’s OC4J instance. Now, when I try to test de application I get the following error:
oracle.jbo.ConfigException: JBO-33003: Connection name <my_conn_to_oas> not defined.
Also, I tried to connect to de EJB session from my VIEW project, so I changed the file DataBindings.cpx. I changed the line Configuration="AMProyectosLocal" to Configuration="AMProyectosAS_DS".
When I run the view project I get the same error:
500 Internal Server Error
oracle.jbo.ConfigException: JBO-33003: Connection name AppServerPenny not defined
at oracle.jbo.client.Configuration.initializeFromConnectionName(Configuration.java:1103)
at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:538)
at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:461)
at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:436)
at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:287)
at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:539)
at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165)
at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:136)
at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:222)
at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:76)
at oracle.adf.model.BindingContext.get(BindingContext.java:457)
What is the problem?
Where can I find the process to deploy in a multi-tier platform?
Please, help me.Thank for your help.
I reviewed the datasource configuration and it is Ok.
The connection’s name isn't a datasource name. It is the connection’s name to the APPLICATION SERVER. I reviewed the bc4j.xcfg file and it has the following definition:
<ConnectionDefinition name="AppServerPenny">
<ENTRY name="remote-oracle-home" value="/home/oracle/OAS/10.2.0/middle"/>
<ENTRY name="ConnectionType" value="Oracle_AS_10g_UNIX"/>
<ENTRY name="HOSTNAME" value="penny.asesoftware.com"/>
<ENTRY name="DeployPassword" value="true"/>
<ENTRY name="oc4j-instance-name" value="OC4J_ARES"/>
<ENTRY name="user" value="ias_admin"/>
<ENTRY name="ConnectionName" value="AppServerPenny"/>
<ENTRY name="ormi-username" value="admin"/>
<ENTRY name="ormi-client-url" value="ormi://penny.asesoftware.com:23791"/>
<ENTRY name="IIOP_PORT" value="1810"/>
<ENTRY name="password">
<![CDATA[{904}05B4D7F42A8C91433599EDC9FDE9B9B249A698997ABBAAAD13]]>
</ENTRY>
<ENTRY name="ormi-password" value="manager123"/>
<ENTRY name="DeployPassword" value="true"/>
</ConnectionDefinition>
Why does the test utility not found the AppServerPenny connection? -
How to Make an explicit oracle connection to a default.
Hi Users ,
(Pro*C code)
I have 2 connections to oracle db using connection identifier. At one point of time, i would like to make one of the explicit connection as default, which means further along i do not want to use the "AT" clause, instead queries should default to default connection.
Referring to below url, it only speaks about 2 distinct explicit connections, does not mention how to convert one of the explicit connection as default.
[ora11 guide|http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28427/pc_03dbc.htm#auto Id13]
Is there a way to do so ?
Looking at google, i found a reference to a url, ora7. In section, 17.2.5, It does say how to make a connection default - by using EXEC SQL SET CONNECT connection_name. However it seems , its not supported anymore.
[ora7 guide|http://starlet.deltatelecom.ru/rdb$doc/oraclerdb/gsp7/gus_pro_create_conn.html]
Antony
Edited by: user11952222 on Sep 1, 2011 3:16 PMI figured it out for myself.
So, does that mean I get the 10 points?
fd -
How to make ADF PanelPage as Template
Hi,
Im Harry. Im newbie to ADF and JSF
I wanna know how to make PanelPage as a template.
So when i drag PanelPage component, it already have my company logo as a header, application name as title. etc ..
How can i do that ?
FYI im using JDev 10.1.3.3Harry - just because you are new doesn't mean that you can keep posting the same message over and over. There are 4 entries for your question already - and as Frank replies in one of them there is no templating built in in 10.1.3 - you can use copy/paste of your component.
Some people use Regions to do templating - though this is not supported and won't migrate to 11 (you can search google for template and adf region - and you'll find the solution). -
How to make a business card? -Adobe Illustrator CC
Hello,
I'm really stressed after searching the web for a tutorial on how to create a business card in Adobe Illustrator CC. I already have the graphics done, but I just need to know the dimensions and what unit it is. I'm using a homemade kit for these business cards. They're Avery, and I've used the template provided by them but every time I use it, print it out the business card is too low, or high or even cut off right when I have them exactly in the template. The product number is 8373. ASAP assistance would be nice as I'd like to get this done.Make sure you align your page using the Page tool ( the one that looks like a hand in the lower section of the tool palette). Also, set a holding line for the document dimensions ( I use an 8.5"w x 11"h Rectangle with a no fill, no stroke applied to it > then I lock it ). This will hopefully align the document through the printer.
Maybe you are looking for
-
I need to know which update(s) I can apply to help stabalize the system.
-
How do i apply a certain tween to several objects?
hi all, I'm working on a little flash project to show a card game being played out. Its just playing out a set of moves - no actual logic for actually playing the game. Anyhow, what i would like to be able to do is create a tween (hope thats the righ
-
R series intelligent DAQ, NI-Compact RIO , NI single board RIO
Hi, I'm in the phase of choosing an FPGA to use in programming some DSP modules. The thing is that while I'm reading about the different technologies to be used, I find it difficult to know how will these devices be connected to my PC and programmed
-
Authentication Failure (Password Mismatch)
Hi there. I am having a nightmare trying to get my web server working under Snow Leopard. To cut a long story short the server died and I had to restore it using a disk image before I migrate it to a new mavericks server. For obvious reasons I'd like
-
This only happens when I am typing an outgoing e-mail on my Yahoo account!