How to make adiference betwen a fake nokia and th ...

is any way ?

One more importantly is the battery. Fake Nokia used a china brand battery not the original Nokia battery, the original Nokia battery should have a sticker hologramand you can see the Nokia in the oval in a little angle from the left hand side and around the Nokia Symbol circle has a line of small text writting. Duno what it said but u can tell it's a line of text. and most importantly is the sticker is 3D view, at the bottom you'll see the Hands symbol deep behind the Nokia foreground symbol. Also there should be 2 lines of numbers on the right handside beneath the scratchable black thing.
This is one of the most important to tell if the Nokia Phone is Genuine, because the fake one used a fake battery. Because the orginal battery is 5 to 10x more expensive. Or even more expensive.
2B || !2B N900 1S TH3 F0N3 4 M3
Please Kudos! me. To show your Appreciation

Similar Messages

How to make a commentary track in iDVD and iMovie 6

Could someone please explain how to make a commentary track using iMovie6 and iDVD? I think I will be able to import the commentary track onto the second sound track in iMovie 6 with no problem. I just can't figure out how to make it an optional track in the final DVD.

Yes, you can put the commentary track on the second sound track in 06. You can also attach a mic and make the commentary as a recording. I will caution that you will need to depress any original sounds associated with the film so that it does not sound like a garbled mess with both tracks competing. I imagine you know how to grab the volume level line in the audio track and nudge it lower or higher?
I also don't see any other option than including two versions of the film on the DVD. Pretty simple fix if it will fit... I would export the plain film first before adding the other audio (or you can simply uncheck one of the audio tracks while exporting to mute it).
Terri

Flash cs3: how to make moving/scrolling photo menu left and right?

http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.

scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
                              navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
function navL_Out(e:MouseEvent){
          navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
                              navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
          navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

How to make comnapy code defalut got 100 and 1001 in the PNP screen

Hi Expart ,
can u tell me my que how to make comnapy code defalut got 100 and 1001 in the PNP screen in HR reporting?
Regards
Razz

Use the below code in the INITIALIZATION
INITIALIZATION *
initialization .
" Make Default values for Company Code 2100 & 2200
PNPBUKRS-LOW = '2100'.
PNPBUKRS-HIGH = '2200'.
append PNPBUKRS.
regards
.....lakhan

How to Make Hair Appear in Front of and Behind an MC Object?

Hello again,
I am making a character with lots of hair. I would like to know how to make the hair appear both in front of and behind the Movie Clip object.
I'll explain further. I have the "frontHair" connected to the "head" MC. When I pivot the head, a bare spot shows in an outlined shape of the arms/legs/torso. I thought I'd remedy this by making "hairBack" and then layer it behind the object. This opens up a can of troubles.
I can't seem to get the "hairBack" to appear behind the torso and arms. Also, the "frontHair" is now blocking me from grabbing onto the arms and legs.
It's crucial that this character has all of the hair, but I can't seem to figure out how to make it happen.
Please, help!
Thank you,
Mike
p.s. While returning from a beer run, I thought about masking. I'm still trying to work out the logic on this one.

Thank you for replying. II didn't know which specific layers and objects you were referring to, but I figured out the problem I was having.
I used only one newly created "hair" object and set it to "Guide" to get it out of the way (in a sense). I then selected all the body parts (movie clips) that I could and selected "Move to Front" for each one. I used the Selection Tool to move the head (with connected hair) out of the way. After doing this I was able to select the "torso"; which was previously hidden behind the Armature Layer. I then put the head back in place and I was set to roll.
Ah, but then I encountered another error. My animations are set to 24fps, but they are moving at least 10 times slower. This happens within Flash and in the exported swf files.
The topic deals with "text field variable names" errors and compiler errors dealing with "Symbol 'fps' ".
This is the address to that topic. http://forums.adobe.com/thread/1009225
Thank you (again),
Mike

How to make a selection in one photo and move it to another photo

I have always used Photoshop Elements, from 7 up to 12. I just bought Photoshop CC. I am totally confused over it. There's not photo Bin, that is where I use to drag from the open photo down to the one I wanted the selection in. I tried doing it
by making the pictures smaller and dragging them down to the bottom, but then things got messed up and every time I opened another photo to use it open on top of the previous one. To me this is important as this is what I have done
in Elements all the time. I can learn the other stuff about Photoshop later, but this one thing is important to me to be able to figure out. I make pictures for people who have lost their pets or for birthdays and use a lot of digital scrapping stuff in
them. It's always been easy to do so, but now I am totally in a daze over how to do it. Always wanted Photoshop, but I only have 30 days to decided if I like it and if I can't figure this one thing out I will have to return the program. Can someone
point me in the right direction for some tutorials on how to do this one thing?

Oh, and I'm not sure what you mean Load Files into Stack. ??????
In the menu Edit there is an item Scripts and there is an Item Load …
If you want to rescale, rotate, … parts of your composition you should work with Smart Objects.
So see if Photoshop > Preferences > General > Palce or Drag Raster Images as Smart Objects is checked and then use File > Place to put the elements into your layered file.
Whenever you need to adjust one select it in the Layers Panel and invoke Edit > Free Transform (cmd-T).
The advantages of Smart Objects are numerous:
• multiple instances of a SO in a containing document that update simultaneously on saving an edited SO (please note that for a SO to maintain a connection to the external file one needs to use File > Place Linked instead of File > Place Embedded )
• the possibility of placing vector content as Vector Smart Objects (though this will output as pixels)
• non-destructive application of Filters
• non-destructive application of transformation, warp, puppet warp (not all of these are available for Vector SO, but by converting such a one to a regular SO they become applicable)
• combination of elements of different color spaces
• the ability to Replace Contents of SO (for example when faking as-of-yet non-existent products by mapping packaging design elements onto images of a blank container and the design is likely to change)
• Stack Modes for certain combinations of photographic images

How i make the partitions in my hard and when make recovery windows not deleted

i hope find solution for it i have windows 8 recovery in my laptob that have harddisk 1000 gigabite
i want make the (c) partion and the recovery partion and 1 other partion i make it but when i make the recovery the windows back my partions to the rest so i want to make the recovery without rest my hard and remove my files for example in my new partion (d)
i make that new partion and put all my data on it but when i renistal my recovery windows it delete the partion and my data so i hope find solution to how let my laptop not remove that partion and the data on it
thanks

the partion i want make i don't want the widnows remove or delete files on him when i make backup the recovery

How to make optical connectivity between Catalyst 4948 and 10K router ?

Hi,
I am Ratheesh P D, network Manager of one project in Motorola. We have one catalyst 4948. Its going to get one 10K router. Our requirement needs optical connection between these two. The document of 4948 says, its compatible with 1000BaseX SFP and 10K is with 1000BaseSX SFP. Could you please tell me how to make these two compatible?

For information regarding the optical connectivity in 4948 cat switch follow the url ,
http://www.cisco.com/en/US/products/ps6021/products_installation_guide_book09186a008023fa89.html
For more information on h/w capability and connectivity of 10 k routers follow the url ,
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/hdwr/index.htm

I have an idea for a phone, but I don't know how to make it or anything like that and I'd like you to help.

I have an idea for a phone that in my opinion beats the big brands, they don't think about the smaller communties and focus on the girls taking photoes of themselves, my phone is different and I'd like Firefox OS to be it's operating system
I still need to finish designs etc. but I have no idea how to make a phone or anything like that so I'd like guidance on the matter.
I also have OS idea's myself but they're only thoughts, nothing in motion.
To summarise, I'd like assistance. If you could help I'd be most grateful, thanks.
-Trey

Thanks, I know I'm not really a big brand (not even a brand at that) but I think you could always release as Firefox's first own brand mobile WITH the OS :)

How to make HTTP connection between a midlet and a php server?

As the title above, can anyone share how to make a HTTP connection between those 2? J2ME and PHP. Thanks a lot!

Can you be a little more specific on what you really want.
When i started doing j2me application, i was required to be able to comunicate to a oracle client database, and my first though was using PHP based pages to comunicate and do the query. Later they would just generate the answer and get it on the cellphone. You can communicate with a PHP server via either GET or POST. I'd choose POST as is more secure IMO.
Here are quite a good ammount of examples of how you can do it
http://www.java2s.com/Code/Java/J2ME/Networks.htm
They aren't PHP based examples, but you have can an idea of how it can be done

How to make a chat room with sound and video with java!

Please tell me how to make it!

Please tell me how to make it!I suggest you to employ some experienced programmers. Doing it by yourself seems impossible (judging from how you asked).
Another suggestion is, don't think to make an aeroplane if you don't have experience making a kite. Moral of the story: learn step by step, see java tutorial, explore its API especially the java.io and Threading.
No offence, I hope my suggestion is encouraging.
rgds,
Alex

How to Make Sure that the Apple Device and Printer are on the same Network

Depending on when one looks on this page, one can find members posting about issues with AirPrint or not being able to find the printer to use AirPrint. The first Item that people are told to check is the Apple Device’s settings. Sometimes the person giving instructions breaks down what to check and how to check and sometimes they do not. Below is a video that walks one through how to print a network configuration page, what information they need to pull from that report and how to then access the Apple devices’ settings and put the device on the same network as the printer. It then walks one through printing to the printer using the AirPrint feature.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?
This question was solved.
View Solution.

I hope that this is helpful.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

EH&S: How to make a link between tables PA0002 and T7EHS00_ANA_HEAD

Hi all, I need to make an Infoset for EH&S and a I can't link tables PA0002 and T7EHS00_ANA_HEAD, i search values in tables an the values in the field PRNR in both tables are different. I need to know if there is a table that contains some reference of a the data of an employee so i can make the link an obtain the data of an employee. Thanks.
Edited by: Albio Vivas on Mar 5, 2009 4:16 PM

Hi Albio,
Check the compatability of the remote cube & edit Phrase Sets. You can display additional information for a phrase set by choosing Utilities - Administration Info. To display the phrase set-to-attribute assignment, choose Utilities - Attribute Assignment.
However, i suggest to go throught he links, which are helpful.
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/2871000a6c11d28a220000e829fbbd/frameset.htm]
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/8d/c8fa3a4dbdf428e10000000a114084/frameset.htm]
http://help.sap.com/erp2005_ehp_04/helpdata/EN/85/b70bdba5944cab8ed7967ec3aea807/frameset.htm
with regards,
mahesh

How can we figure out a fake Nokia 8800 Carbon?

What are the different between the real one and the fake?

The report saying "8800 Sapphire Arte" isn't necessarily grounds for rejection. The innards of the 8800 Arte, 8800 Sapphire Arte and 8800 Carbon Arte are all identical.
How much is the phone being sold for? The original is being sold for around £1000. Much less than that and you can be fairly sure it's a fake.
If you've been able to see the label then I assume you've had it in your hands. You don't say if a product code was mentioned (if one wasn't then it's a fake).
Connect it to a computer and see what prompt comes up on the phone's screen. If you're given choices such as "webcam" and "comport" then the phone is a fake.
Message Edited by grschinon on 27-Oct-2008 10:54 AM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

How to make the lines of the table and the template same

Hello Abapers,
I have a requirement, I have made a table in which i have displayed all the values in it, and under that i have taken a template and diplayed the total of it but the lines drawn to the table and the template is different, the table line is dark and the line of the template is lite, how can i make the line of the template dark, i mean the same as the table line. i hope u understand my problem.can u please help me in solving my problem as the requirement is very urgent.
HOPE U UNDERSTAND MY PROBLEM
Thank u in advance .

HI,
Adjust the line width option for template and table,its there under pattern.

How to make adiference betwen a fake nokia and th ...

Similar Messages

Maybe you are looking for