HOw to make AE render my imported sound?

I imported a sound and layered it in the comp but AE doesnt render it in preview nor in final movie.
It says that the sound option is set to off in the render settings but i see no where i can change that.
What can i do?

You may not be doing a proper RAM Preview -- hitting the space bar won't cut it. Time to open AE's online help!
Here's the appropriate section for your needs.
Now, this is a pretty basic thing. It sounds like you may be trying to use AE intuitively. If so, you won't have a lot of luck. The application has too many easily-overlooked basic features that a good knowledge of the basics is imperative.
Fortunately, it's easy to get that basic knowledge. Here's an excellent source.

Similar Messages

How to make firefox render fonts as google-chrome does? (screenshot)

How do I make firefox render fonts as google chrome does as shown in screenshot? (Chrome below and firefox above)
Notice for instance the dash "/", "Explore", "Features" etc and the text at the bottom "added git_fixes".
I'm no expert but is it antialiasing that makes the difference? Cause it seems the font is the same, right?
.Xresources
Xft.dpi: 120
Xft.antialias: true
Xft.hinting: true
Xft.hintstyle: hintmedium
Xft.rgba: rgb
Xft.lcdfilter: lcdlight
~/.config/fontconfig/fonts.conf
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
<match target="font">
<edit name="antialias" mode="assign">
<bool>true</bool>
</edit>
<edit name="hinting" mode="assign">
<bool>true</bool>
</edit>
<edit name="hintstyle" mode="assign">
<const>hintfull</const>
</edit>
<edit name="rgba" mode="assign">
<const>rgb</const>
</edit>
<edit mode="assign" name="lcdfilter">
<const>lcdlight</const>
</edit>
</match>
</fontconfig>
I have ttf-win7-fonts installed, and also recently I've installed Infinality (haven't configured it, necessary?).
Advice appreciated.

bleach wrote:
well in firefox you can chose your font and then unclick the let sites chose there own fonts.
ya looking at your picture I do see the diff. but I do not have that pixelation in my firefox.
.Xresources has nothing to do with gtk
I do want to let sites choose their own fonts though.
When I look closely on my screenshot I wonder if it's even the same font though (the "3" looks very different).
Perhaps that's where the problem lies.
If I force firefox to use Arial, it looks good. If I set it to Helvetica which seems to be the font used, it looks like in the screenshot - pixelated.
$ fc-match helvetica
helvR12-ISO8859-1.pcf.gz: "Helvetica" "Regular"
Seems it doesn't use truetype (helvetica.ttf?) as default font for helvetica - shouldn't it?

How to make a simple Pc Speaker sound output?

Hello,
how can a make a simple PC Speaker sound output like the standard beep for errormessages?
Can anybody help me?
Thanks,
Alex

Use this:Toolkit.getDefaultToolkit().beep(); or this: System.out.print("\0007");
System.out.flush();

How to make JSF render binary data

Hi Everybody,
I am trying to make JSF render some binary data. I have my own components, set of renderers and render kit all implemented.
Still, I get several problems, one of them seems to bo implementation of UIComponentTag (in Sun's reference implementation, but, on the first glance,MyFaces has the same problem).
If you are rendering response, you should use either ResponseWriter or ResponseStream, not both of them, correct ? But UIComponentTag directly creates ResponseWriter in doStartTag() code - and what are my chances to use ResponseStream somewhere ? I was thinking about UIComponent subclassing ( re-implementing doStartTag() and doEndTag() ), but it does not seems to be easy if you are NOT calling parent's methods .
Of course, I can access servlet's responseStream through facesContext and do anything I would like, but it seems to be more than a hack
So - does anybody has a positive experience of making JSF render binary data, or this is more a theoretical possibility ?
Regards, Nikolajs Krasnikovs

If the data bean is request scoped, then just load it in its constructor or initialization block.
If it is session scoped, add the following lines to the getter of the datamodel:
if (FacesContext.getCurrentInstance().getRenderResponse()) {
// Reload data list here.
}Also see the following article for some new insights: http://balusc.blogspot.com/2006/06/using-datatables.html

How to make a chat room with sound and video with java!

Please tell me how to make it!

Please tell me how to make it!I suggest you to employ some experienced programmers. Doing it by yourself seems impossible (judging from how you asked).
Another suggestion is, don't think to make an aeroplane if you don't have experience making a kite. Moral of the story: learn step by step, see java tutorial, explore its API especially the java.io and Threading.
No offence, I hope my suggestion is encouraging.
rgds,
Alex

How to make a movieclip and import it to another fla file ?

Hi,
I am having one of those 'self doubt sanity' moments.
Entering melt down here !
I want to make a movieclip from a graphic map background, and some existing movieClips that reside in another .fla
In this other .fla file the movieclips are in the wrong layer so by starting over I wish to tidy things up.
How do I create a movie clip from such ?
Then I start thinking, how does one create a movie clip, then bring it into another file ?
I even did a test that went:-
1) create new AS3 file
2) draw a box
3) select box and hit F8 Convert to symbol, select movieclip and name it box_movieclip
4) d/click box and made a classic tween and had box moving across stage.
5) save as and named file MovieClip_Boxtest.fla
6) open new file AS3 and import to library the BoxTween.fla and got a message saying One or more files not imported as problems reading them.
So having done the above stages 1 to 5 which made a movieclip, how do I get that into another fla file ?
having done this before I am panicking that I have lost some brain cells !
Envirographics.

When I want to move a movieclip from one fla to another I just right click it in the library and select copy. Then I go to the library of the other fla, right click the library (off any other symbols) and select paste.

How to make a 5.1 Surround Sound Blu-Ray with FCP

Being disappointed that FCP only makes Blu-Ray discs with a stereo soundtrack I decided to find a way to make one with my 5.1 soundtrack. After hacking the build process by replacing the stereo AC3 file with a 5.1 version while it was still making the video file I stumbled on a very simple method of making a 5.1 Blu-Ray.
In FCP, choose Share and select Blu-Ray. Check the box that says something like "burn Blu-Ray disc". When the project is ready to transcode and burn, hit the "Send to Compressor" button. Once in compressor, right-click on the Dolby Digital 2.0 setting and select "Edit Setting" (or "Change setting", not sure which, my FCP machine somewhere else at the moment) and browse to the 5.1 Dolby Digital setting. Select it and submit the job. When done, you'll have a 5.1 Blu-Ray disc of your project.

There is no way to create a real Dolby sound unfortunately. The mac currently only supports 2 channel outputs. There are interfaces you can buy that will separate the bass and send it to the subwoofer, and fake a 5 channel sound field, but ultimately it will only run 2 sets of stereo speakers, and one mono in the middle, so it is not true surround sound.
Here's a similar thread with more information if you are interested:
How can I connect 5.1 speakers to Macbook Pro 13 bought Summer 2011
I wish there were a way to do it, I personally am a recording musician and an audiophile, and have looked for the same thing on several occasions. But unfortunately at the time, it seems as though there is not the hardware to do it.

How to make a "wah" lead guitar sound less shrill?

Hi all, so I have this song with the following, all on seperate tracks: Drums, Bass, Distorted Rhythm Electric Guitar, and Distorted Lead Electric on a Crybaby Wah Pedal.
I'm happy with everything except the Lead Guitar track. The wah makes it sound shrill, ear-splittingly so. I recorded by sticking a mic in front of the guitar amp (me using headphones).
I've fiddled with a it a bit, and but can't really find a way to "warm up" the sound of that lead guitar.
I'll attach an mp3 if anyone wants to hear it.
Any suggestions?

Since I'm bored...
Here are some graphs just to give you an idea of how crazy some guitar pedals are and how much they filter the audio....
The first one (MT-2 AC (Un-modified - Full gain).jpg) is a graph of an unmodified pedal. Notice the peaks and how drastic it changes the sound...
The second one (MT-2 (Modified - Full gain).jpg) is a graph of a modified pedal that eliminates the three fixed boost circuits but allows the 3 tone controls to still function...
The modified pedal does less to the audio and allows the person (or persons) mixing the sound to control where those peaks will be and how much gain there will be...
Erg... Have to go now...

How to make Photoshop save Aperture imported JPEG images as JPEGs

Recently, I upgraded from Photoshop CS 5 to CS 5.1.
My point and shoot cameras record in JPEG format. Often, I'll import those photos into Aperture and then tweak them in Photoshop using the Edit in External Editor command. My preferences for the external editor in Aperture were set to 8-bit, Photoshop
With Photoshop CS 5, I would edit the photo and choose Save and the edited photo would be saved back to Aperture as a new version, in a JPEG format.
Now, using Photoshop CS 5.1, when the imported image from Aperture is converted into a PSD file and when I save back to Aperture, I end up with a PSD file.
How can I revert to how it was before? JPEG image in Aperture, opened in external editor Photoshop as a JPEG, edited in Photoshop, then saved back to Aperture as a new version JPEG?
(Though this question is approached in this forum, a solution to my question is never found as each dicussion ends up going off-topic from the original question)

clapperincus wrote:
Any further ideas from anyone who's experienced trying to open a JPEG from Aperture in Photoshop as a JPEG?
Like I said before, you cannot open a jpeg as a jpeg, the file must be decompressed to open in PS or in Aperture, and that has always been the case.
I do not know how it used to work, but I tested and you are correct that with PS 12.1 and with Aperture 3.2.2 a JPEG sent to open in external editor (PS) is opened into your choice of lossless format and then goes back to Aperture in the lossless format you chose.
IMO this is the way it should be, because every save into JPEG loses image data, so such saves should be limited to the final export, in this case when the image actually leaves Aperture. If the file was compressed as a JPEG when leaving PS, decompressed and edited in Aperture, then compressed again to export as JPEG from Aperture, unnecessary additional image data loss would occur.
It is always better to save the application of lossy compression until the very last step in a workflow because other usages (printing, for instance) may occur before applying the lossy compression.
-Allen

Don't know how to make my main class import a jar file

OK, the title doesn't make much sense but here are my create-jar.bat and manifest files:
create-jar.bat:
jar cvmf manifest.txt dassimul-admin.jar player/ admin/ com/ connector/ common/ *.class
manifest.txt:
Main-Class: admin.DASAdmin
the problem is that in connector/ folder there is the jdbc mysql connector driver (.jar file).
in Eclipse I can add this jar to the Java Build Path, so the program runs.
When I double-click the dassimul-admin.jar file, I get a Class Not Found Exception
C:\MYWORK\dassimul>java -jar dassimul-admin.jar
FATAL ERROR WHILE LOADING SQL DRIVER: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
I think that the problem lies in the fact that admin.DASAdmin can't see and import the jar file in connector/ folder... am I right?

It looks like you are putting the mysql jar file inside the dassimul jar. That won't work unless you write custom code. You should use the Class-Path attribute of the manifest to define a relative path(s) to the other jar(s) that you need to use.
[http://java.sun.com/docs/books/tutorial/deployment/jar/index.html]

How to make Safari automatically open .ram sound clips?

When I click on, say a a sound clip to preview music, Safari just downloads the file but does not automatically play it, so I have to click on the file for it to be played by RealPlayer instead of this happening automatically after the download. The "open "safe" files after downloading" box is checked in preferences.
Using Safari 2.03 and RealPlayer 10.0.0 with Tiger

Safari probably has Open Safe Files disabled in preferences as a security caution. Open Safari's Preferences and click on the General icon. Check Open Safe Files if you want Safari to open files automatically. However, if you do this, make sure you have installed the most recent updates using Software Update because the last security update fixed a couple of exploits related to malicious files.

How to make a render farm with FCP X / Compressor??

Wondering how to setup a min render farm with FCP X on three machines. Played around with setting in Compressor but never see any machine available when I go to render on each machine?

Ok, so I'm using the wrong terminology.
I want to have all my machines transcode for me, is this possible, yes or no and how do I set it up. I've buggered around with all the settings in the link above but I'd get anything to show up?
Also I believe that compressor needs to copy the entire file to be rendered over the network for the other machine to work on it - is this correct ? I'm on wifi guess I could connect machines together via ethernet.
I'm looking at 4x time to do a simple render on prores proxy material and when I have to do it on a 2 hour wedding video I'll be looking for the nearest bridge to jump off!

How to make PDF render to handle HTML specific?

I am having a database which has content like footer, footnotes and disclaimer. content can have HTML entities such as ampersand dagger semicolon "&dagger;" and ANSI code so that browser is able to interpert and format accordingly. We are pulling the same content for display in web page as well as in PDF. But our PDF render process fails to display since HTML entities and ANSI code are browser-specific and not PDF-specific. How to convert these HTML entities and ANSI code so that to display the same symbol in PDF?
Any help will be appreciated.
Thanks in advance.

Crossposted [http://forums.sun.com/thread.jspa?threadID=5400242&messageID=10779628#10779628]

How to make the life easier when sound file may be changed in future?

Hello, friends,
I have about 600 sound files (total about 10MB), which will
be used by thousands of .swf files. Each .swf file may use only a
few of those 600 sound files.
I know I can load those sound files into each .swf as needed.
However, since those sound files may be changed or modified in
future, I may have to modified each .swf file to reload the
new/modified sound file then. This would be VERY painful.
Any better methods? Any sample source code or reference
papers?
Thanks a lot for your help.

The obviuos solution would be that you just replace the old
(say) "crash.mp3" with the new "crash.mp3" and that's it.
The more sophisticated way would be to store someting in xml
like

How to make WebView Render Html select elements as ComboBox rather than ChoiceBox

I have a dropdown of country names. The problem is whatever value is selected the dropdown always starts from top of the list, as webview is creating choceboxes for selects. I want to display ComboBox instead.
How can I accomplish this?

Also, did you ever think to use the "Preview" button?
Do you expect anybody to look at that mess of code?

HOw to make AE render my imported sound?

Similar Messages

Maybe you are looking for